How To Hold In Place Your Motorcycle Oil Filter Spring ???
Vložit
- čas přidán 15. 09. 2022
- ✅ Instagram: / motorcyclemecha
Ride at your own risk. Moto Mecha disclaims any liability incurred in connection with the use of the concepts outlined on this channel/videos. You alone are responsible for your own safety.
#mechanic #dyi #repair #motorcycle - Auta a dopravní prostředky
Hope this helps. If you have any question feel free to comment below or message me on Instagram!
I’m enjoying your videos. I’d be very interested in seeing some R1200GS specific vids on tasks such as valve clearance; fluid changes; tire replacement/wheel balancing and, spline lube.
Noted!
SWEET !!!!
😁👍🏻
Rock n roll!
:)
What types of grease would work for this trick if I don’t have that multi-purpose white stuff you have? Would be bearing grease be ok to use? Is Vasaline safe to use?
You do wonder if the engineers deliberately make things difficult. XR250, oil in frame one, every bolt is a different size and different torque!
Yeah I just don’t get it sometimes
hi, thanks for share. What´s the function of the spring? is it justo for helping when changeing? or does it really is needed?
It holds tension on the filter holding it in place. they could have designed better IMO
Thanks for the tip! I’m always afraid of mixing chemicals (oil/grease) like this. Is there a way to know when it’s ok or not?
It’s such a tiny amount, plus when I do the next oil change, that little bit of grease is usually still there
What is the purpose of the spring? Some kind of pressure bypass? Too bad they couldn't engineer it on the opposite side.
Ya there’s gotta be a better design
Great trick. That one gets saved in the memory bank.
😁👍🏻
What wood happen if you for get the spring
Oil filter would move around and wouldn't filter properly.