I’d honestly say the place is to blame. But, Series 5’s are known to be cheaply installed, so I’d say both the building and (minorly partially) the elevators themselves. I’ve ridden Series 4 gen2’s that are heavily busy and they run very well and rarely break down!
i stayed in a condo in Panama City almost 12 years ago that were series 4 with green indicators 3 ELEVATORS FOR 23 FLOORS ON 4th OF JULY WEEK the Condo was Celadon Beach Resort
these are elevonic 411s, not gen2s. so say about them what you will, the gen2s in myrtle beach are ironically more reliable than most other models installed here, and usually run much smoother.
I'm very late, but these are not Gen2s. None of the four towers have Gen2s. Towers 1 and 2 have custom Elevonic 411s, with the full standard fixtures suite. they travel at 400/500 FPM respectively. Tower 4 also has true elevonic 411s, that also go 400 FPM. tower 3's SPFs go 350 FPM.
I doubt this is Otis’s fault. Gen2s can go a maximum of 22-25 floors I believe so I doubt it’s because they’re Gen2. This could be the Hotel for not maintaining them properly. Or it’s possible that the power could have dipped a few times that day and made the elevators stall for a couple of seconds or the controllers probably had a few dips. I’m not positive about that tho so don’t quote me.
Well, but Gen2 isn't exactly the greatest quality, but that said, it is BY FAR the most reliable MRL I've been on. I would assume this is likely the hotels' fault too, but like I said, I'm not sure. Especially since this is one of the best ranked hotels in Myrtle Beach....
gen2s go 300ft max. but that's irrelevant since these are elevonic 411s, not gen2s. i rode them across two consecutive days. these travel 400fpm and do not act/run at all like gen2s
It couldn’t be the wind. The second car on P1 was reset. That involved the car that Floridan elevators was on as they are in 1 bank. Both of these run on one controller
lol the only tower here that has decent spec is tower 2, with three elevators traveling 500 FPM. tower 3 is the worst, since those are two thyssenkrupp SPF elevators traveling at 350 FPM, rather than 400FPM like the ones in the video do. didn't realize how lucky i have it at the mar vista grande with four 350FPM Gen2s for 15 floors
it's not a gen2, it's an elevonic 411 that travels 400FPM. 400fpm is not in gen2 spec, and these do not run or act like gen2s. the overslung gen2s in this area run better than many MR tractions from otis, schindler, and TK
Otis Series 5s (or actually Series 6, since Evan found an Otis Series 5 installed in 2004 with what many people would mistaken as Series 6 but is actually an older Series 5) are cheap-a** POSes! That was during -- what I would like to call -- Otis' "S**t period" where their elevators were cheaply made (as well as most of which were made in Mexico) and it happens to also been during the Great Recession, so yeah...
Series 5 is indeed called Series 5 according to the UNITEC Websites, and actually, I believe both Series "6" and 5 were made during the same time as I have seen some from 2010-2011 but "6" was rarely purchased for some weird reason....
There is no floor 13 because during the late 1890's, when elevators were slowly becoming popular, there was a superstitious belief that the number 13 was extremely unlucky
they're not gen2, they're elevonic 411, and they travel at 400FPM. they would be smoother and higher quality if they were actually overslung gen2s. kinda unfortunate
4:09 Please take the next elevator, We are experiencing: Minor Technical Difficulties
Well, it’s Myrtle Beach, place where there’s a lot of not so great elevators.
The Sea Crest Resort has very bad elevators. One of the kept breaking and the door close button doesn't work on any of them through the entire place
1:01 you can hear the other elevator reset
3:52 I bet that was when they reset it... wow
You would have thought they would have thought about people on the elevators!
The fact that the guy kept talking the whole time this happened-
“Please take the next elevator”
Me: “THERE IS NO NEXT ELEVATOR-“
Yep you cant press the button that *calls* the elevator to the floor you are on
"minor" yeah sure otis let's go with that
I wonder if it’s from the humidity from being outside
Minor technical difficulties
When elevators malfunction.
2 elevators for 16 stories? Not enough.
What about 3 elevators but 22 floors
Sadly it's way too common in MB.
@@FabianFoxandFalco2004 try 3 for 24, which is just as bad (and they broke constantly!)
Well i was once in a hotel in hungary qhere they had 1 very slow elevator for 10 floors with constant traffic.
@@albanyweather7947 try only 1 elevator for an 11 floor parking garage
You should go to Boulineau's Foods Plus next time you are in North Myrtle Beach. They have two Otis Series 1 Elevators.
I’d honestly say the place is to blame. But, Series 5’s are known to be cheaply installed, so I’d say both the building and (minorly partially) the elevators themselves. I’ve ridden Series 4 gen2’s that are heavily busy and they run very well and rarely break down!
i stayed in a condo in Panama City almost 12 years ago that were series 4 with green indicators 3 ELEVATORS FOR 23 FLOORS ON 4th OF JULY WEEK
the Condo was Celadon Beach Resort
these are elevonic 411s, not gen2s. so say about them what you will, the gen2s in myrtle beach are ironically more reliable than most other models installed here, and usually run much smoother.
I'm very late, but these are not Gen2s. None of the four towers have Gen2s. Towers 1 and 2 have custom Elevonic 411s, with the full standard fixtures suite. they travel at 400/500 FPM respectively. Tower 4 also has true elevonic 411s, that also go 400 FPM. tower 3's SPFs go 350 FPM.
You should've heard that guy in the other elevator that malfunctioned.
I’ve stayed at pepper tree ocean club so many times
After that Jolt you should take the Stairs to First Floor
I probably should've, but I really didn't want to 9 stories high up LMAO....
@@FloridianElevators 3:50 was that left elevator even freefalling?
3:50 Some of the buttons light up and cancel P1 and 2.
I doubt this is Otis’s fault. Gen2s can go a maximum of 22-25 floors I believe so I doubt it’s because they’re Gen2. This could be the Hotel for not maintaining them properly. Or it’s possible that the power could have dipped a few times that day and made the elevators stall for a couple of seconds or the controllers probably had a few dips. I’m not positive about that tho so don’t quote me.
Well, but Gen2 isn't exactly the greatest quality, but that said, it is BY FAR the most reliable MRL I've been on. I would assume this is likely the hotels' fault too, but like I said, I'm not sure. Especially since this is one of the best ranked hotels in Myrtle Beach....
gen2s go 300ft max. but that's irrelevant since these are elevonic 411s, not gen2s. i rode them across two consecutive days. these travel 400fpm and do not act/run at all like gen2s
3:49this is where it goes down
Otis could definitely maintain these elevators a lot better especially in a busy hotel like this
I'm actually thinking this is the hotel's fault.... There is another building here with Thyssenkrupp and they are just as bad as these...
@@FloridianElevators what was the cause of the other? Elevator to bump like that?
@@FloridianElevators was that bumping caused by released breaks?
On the bright side, the elevator didn’t get stuck between floors, took you to the nearest floor and let you and the fellow passenger get out
I love your vids ❤️
Could it be the wind? 16-floor buildings can sway a bit.
It couldn’t be the wind. The second car on P1 was reset. That involved the car that Floridan elevators was on as they are in 1 bank. Both of these run on one controller
2nd of all, WHY are there only 2 elevators for 16 floors??? That’s pretty poor elevator service to begin with
lol the only tower here that has decent spec is tower 2, with three elevators traveling 500 FPM. tower 3 is the worst, since those are two thyssenkrupp SPF elevators traveling at 350 FPM, rather than 400FPM like the ones in the video do.
didn't realize how lucky i have it at the mar vista grande with four 350FPM Gen2s for 15 floors
As Matt from GPGBDAF would say, they’re completely 100% anti-scenic!
I think that there should be more elevators around the building! Do you agree?
Obviously.
@@FloridianElevators duh
Floridian Elevators they should at least have a bank of 4 elevators.
It's a gen2, what were you expecting.
it's not a gen2, it's an elevonic 411 that travels 400FPM. 400fpm is not in gen2 spec, and these do not run or act like gen2s. the overslung gen2s in this area run better than many MR tractions from otis, schindler, and TK
Wyndham has always been hit or miss for me. Sometimes their hotels are ok, and sometimes they are trash.
a weekly comprehensive maintenance program will do the trick
Yes, but of course nobody wants to do that LOL
@@FloridianElevators would *bi-weekly* sound better?
@@blueauraretriever LOL that would be even worse for just about anyone LMAO
Maybe the power was out and they were in emergency power.
Are there "maybe" service elevators in this building that you could take instead, or are these the ONLY elevators in the whole entire building?
They're the only elevators in the ENTIRE Building.... Most hotels in Myrtle Beach don't have service elevators....
@@FloridianElevators I had a feeling they were...
Otis Series 5s (or actually Series 6, since Evan found an Otis Series 5 installed in 2004 with what many people would mistaken as Series 6 but is actually an older Series 5) are cheap-a** POSes! That was during -- what I would like to call -- Otis' "S**t period" where their elevators were cheaply made (as well as most of which were made in Mexico) and it happens to also been during the Great Recession, so yeah...
Series 5 is indeed called Series 5 according to the UNITEC Websites, and actually, I believe both Series "6" and 5 were made during the same time as I have seen some from 2010-2011 but "6" was rarely purchased for some weird reason....
16 floors? I see 15 floors on the buttonst
So sorry a rude person was with you they should have been forced to leave
Why is there a star on P1 and a star on 1?
I think its cause p1 is the main floor of the garage and the 1st floor is the lobby of the hotel
Where is 13?
I'm afraid my dear that 13 is not present
There is no floor 13 because during the late 1890's, when elevators were slowly becoming popular, there was a superstitious belief that the number 13 was extremely unlucky
Gen2, as reliable as always…
they're not gen2, they're elevonic 411, and they travel at 400FPM. they would be smoother and higher quality if they were actually overslung gen2s. kinda unfortunate
09/04/20
These elevators are from like 2014 they shouldn't be malfunctioning
They're definitely older.
They're from 2008
@@FloridianElevators oh ok
Those do not work well at all