How to Set RichAuto DSP A11 Parameters and Genral Introduction of DSP A11
Vložit
- čas přidán 16. 06. 2017
- RichAuto DSP A11 parameters setting
XYZ pulse parameters, working table size, speed... parameters setting
General introduction of each button functions of DSP A11 - Věda a technologie
Thank you. Any idea why the Pindar on/off button doesn’t turn on the spindle? Mine does not.
Hello, does the dsp a11 have settings or parameters to address the backlash in machine? Thanks
Thank you very much sir for the guidance, I was very helpful
You are welcome!
很有帮助，谢谢
Nice video!! U know what means if in the machine Mini teccam 12/08 appears the error 16.0 an 24.0
Hi
I have a Laguna Swift 4x8' and when I push the "Home" button in my DSP Controller Richauto A11 the router moves correctly to the home position that is set in Y- and X+
But when I manually move the router to Y+ or X- the router goes off the limits and "crash" with the router structure
I set the Table Size in the DSP Controller to:
X Size = 1219 mm
Y Size = 2438 mm
Is that correct or I have to set the numbers that you shown in the video?
Thank You :)
Goo day my friend.
I have install a Richauto dsp A11 and mainboard on my 1325 cnc router, now the cnc X Y Z axis manually work fine. but when i send file the Z axis is reverse.
Can you please help me out. Thanks,
Great job sir
Thank you! :)
What is the maximum work speed and fast speed for hyprid servo with richautoA11s remote. Drive is leadshien H2-758. Tell me speed
Hi, my richauto A11 dsp controller has a problem, its screen turns on but shows nothing, I changed its screen but it has the same problem. Can someone tell me if it's a common problem that can be solved or do I have to buy a new one?
hey i have the same problem. what did you do to fix it?
Will Fehr I could not repair it ( I think the problem was the target) so I had to buy a new richauto A11 controller. Sorry.
I have same problem today
@@RobertoHnH did you replace the pendant, or the whole thing?
@@douglaspollock102 The whole thing
thank's
Hi, my controller is not working please help me what should I do
Sir I want delay adjestment between one after one in array work please help me
Does anybody has corrected the G02/G03 bug?
You may update the system to see
is this for a plasma cutting
Hi, DSP controller usually used for cnc router, cnc engraving cutting machine, plasma cutting machine has its special control system, :)
My spindle speed.... S2 6000rpm, S3 9000rpm, S4 12000rpm etc. But S1 000rpm / off.... Why so....??
Please teach me
how to set any output after completion of position in x-y axis.
Hi, pls have a try:
Menu-Auto pro setup--stop statue
Press"X+" or "X- "to where to change the coordinate and then press the "Delet/Pause" to input the number needed.
Press"ok" to save and press"Delet/Pause"to get into finish action list
then press"x-" or"X+"to where to change the statue and press"ok" to save.
Hope this can help you!
UPGOAL CNC MACHINERY
Thanks for your reply...
I needed it in auto cycle can we ?
It cant do work with auoto cycle. After each work finished, you need to restart the work or press buttons"RUN/PAUSE+HOME" for repeating work.
My dsp shortcut keys off how to on dsp shortcut keys
Run/pause+home is of and break point
Hi, I have a RichAuto a11 dsp controller, it was working fine but when I powered it up a few days ago the screen is blank and when I try to connect it to pc the pc doesn't detect anything, could you please help me?
Ba6ee5 Ba6ee5 i have same problem now.. What u make!!?
did you get to solve it?
I have had same problem, pls chack all switch limits, it could be broken ,in such situation display/screen of A11 is black, maybe other broken elemets could make the same problem... now I learn how to use A11, but have problem with setting Inverter E300 SUNFAR with A11 . I dont found any information about it... how know how setting Inverter for Spindle pls write to me solar_system@o2.pl I ask 10 companies and some person from Chnia but all ignored my questions... Chinese do not help selflessly
Sir can i ask you one question
Yes, pls