How to set parameters in richauto A11 control system.
Vložit
- čas přidán 29. 06. 2019
- If your "DSP" parameter is missing, adjust it according to video
This parameter is suitable for most CNC routers in China.
The pulses are going to be different
www.stylecnc.com
service@stylecnc.com - Věda a technologie
how to speed up the z axis movement while working? because i use the machine to make holes and it takes so much time to finish it.
Bom dia parabéns pelos vídeos muito esclarecedor você teria algum vídeo explicando configuração da sonda prob ??
Do you use G2/G3 ?
Good afternoon, tell me where I can see the available G commands on the controller.
For example, is there a G02/G03 control panel?
Good day. may I ask how to setup stepper motor output. I have Oriental Stepper motor and I want to use it in my project using RICHauto A11 can you please help me how to set it up. it is a 2- Pluse mode motor. Thank you..
Dlaczego z equival jest ustawiony 160 skoro skok śruby 10mm.
I have A11 controler and there is a parameter Circle limit. Also to know I have with out wanting reset the controller. I have made everything as before except for the Circle limit. On my controller it is about 4232. For I have seen on the net at others it is about 1000. So do you know what is that Circle limit for so I know how to set it? .... dont mistake it with CirLimit
It means to limit the speed at which you can make a circle. mm/min
Can I use a DSP controller with options for ROUTER to operate a PLASMA cutting machine?
The richauto DSP controller has a professional plasma controller. They look the same
we buy new moter buy not work ?? need to chnage driver too
Hi
I have a Laguna Swift 4x8' and when I push the "Home" button in my DSP Controller Richauto A11 the router moves correctly to the home position that is set in Y- and X+
But when I manually move the router to Y+ or X- the router goes off the limits and "crash" with the router structure
I set the Table Size in the DSP Controller to:
X Size = 1219 mm
Y Size = 2438 mm
Is that correct or I have to modify that numbers or another option?
Made according to normal Chinese machines. When Home is pressed, the machine moves to the X- and Y-positions. That is, the machine is in the front left corner.
I have a laguna IQ with a RichAuto system A18E handheld controller when I turn it on then go and home x y z axis x and y moves like it should on z i go to zero z on the work piece it stops 4" above it and on the handheld on z it shows zero on z so not sure where on the handheld to change z pharameters can anyone help me out thanks
Hello. Please include punctuation in your text.
I can't understand what the problem you describe means. sorry.
rich auto. system is loading. . . . ?
loading?
Is there any solution for a cnc router to resume its design after sudden power shut down/ load shedding ? l would like to see a video on how to activate that feature..
You can contact me on WhatsApp.
+8615865009262
I'll send you the video
@@STYLECNCService i have contacted you on whatsapp. plz send me the video.
@@fazlerabby8906 I have sent the video to your WhatsApp
@@STYLECNCService Thank You Very Much.
I have a 1325 cnc router and I have lost my pulse parameter do you know how can I find it
Are you using our company's machine?
The pulses of each machine will be different.
First, you need to confirm which drive your machine uses.
Know the "segmentation" parameter of the drive settings.
There is a tutorial yo set parameter rich auto dspA18
You need to know the pulse of your machine's A axis
Ok sir but For x,y, z axis are same ?
@@original6828 We don't know for sure.Every manufacturer produces different machine pulses
how to know what pulses parameters to set
In 30 seconds, the number of pulses is set.You need to consult the manufacturer of your machine. The pulse number is not fixed
@@STYLECNCService I am the second buyer, so i don't have contacts of the manifacturer. And i cant find anything if i look in google for that manifacturer.
Name: ARTE MAK pres
Model: MED-1318
Voltage Rating: AC220V /50Hz
Working size: 1300x1800mm
Spindle: 2.2Kw
Those are the information in the label of the machine
@@AgronStatovci You need to send a picture of your machine to me and let me know what kind of drive it USES. What kind of transmission structure
I move 1mm in DSP A11s but the machine moves 2.5 mm.
Please solve my query
The pulse settings in your controller are incorrect.
You need to adjust the pulses within the controller
Horrible video. You are explaining NOTHING. You're not even telling me how to use the keypad. I am attempting to use the machine I bought from you for the first time and this video is not helping. I will look elsewhere for help.
i have stepper machine and facing issue origin change
cut dirrent sixze not as per file
so change ball screw , moter , driver , cable but same issue
now want to format a11 dsp can u help me
need u contavct no