K20 Civic Gets Launch Control🔥
Vložit
- čas přidán 25. 08. 2024
- We all love Launch control/ 2-Step, we all love flames, and we all love blowing things up on the side of the road during the middle of a fun day... right?
Check Out MPC: www.mpcmotorsp...
THE COMMITTED CREW:
www.TheCommitt...
FOLLOW ME HERE⬇️
•Instagram - / robbieferreiraa
•Facebook - / robbieferreiraa
•Twitter - / robbieferreiraa
SEND STUFF HERE📬
PO Box 94 Wasaga Beach, ON, L9Z 1A2
My guy really building the “civic with the laptop” that everyone fears.
😂
That also 2steps
Lmaoo literally
evil scientist but mechanic version
너도 내 친구는
I usually dont leave comments but I gotta educate u a lil. Hondas are super common for popping axles out. Not blowing up.. the way u were launching I knew it was about to happen. U gotta get thicker axles for one rated for more hp. Second when launching u have to kinda ride out the clutch. Ur just dumping it. U keep doing that ur guna have this prob every time. Practice it more with out the 2 step first to get the feel for riding the clutch. Then work ur way to the 2 step. Damn guys that was hard to watch lol. Good luck keep it up.
Yea you can see me going from dumps to actually easing into it in different launches, just having fun getting a feel for it!
Any helpful comments are welcome here lol
Thank you for dropping knowledge !
Stock EM1 SI wheels would make a great sleeper wheel setup with some meaty tires
Oh yes!
I came here just to comment this. Lol
Yes ive seen people put r888 semi slicks on them grips well considering they can fit 195mm tires on them
Robbie look into Ryver wheels. They make wheels that look like wide stock civic wheels!! Really hope you see this
They're cool but not so well made that you'd fool someone tho
We miss the EG :(
agreed
About to make a comeback😇
@@RobbieFerreira 😮
@@RobbieFerreira Let's goooo 💪 can't wait
Hope he keeps it b series
When you’re going for a launch make sure to preload the drivetrain (hold clutch right at catch point+hold e brake) and slip out the clutch at launch and you’ll never brake an axle
Interesting! Thanks!
New camera looks fantastic! Next you should check into a lens that has Image Stabilization to cut down on camera shake. 🔥🤘
Days when Robbie posts are the absolute best days🙏🏼
C'Mon man. Everyone knew that shaft was going to be blown out 😂😂 it's the chasing HP law. Upgrade on section of your car and another becomes a weak point.
Also engine risers. More ground clearance and keep the lows. Hockey pucks are the ghetto way 👍
That new camera looks sooooo good
just as I got something to eat nice timing, and its just the cv joint
Sounding sick and flames for an extra bonus
A set of Acura el rims look great and are pretty easy to get ahold of
peace out guys stay committed! Nice!
Yo Rob! Awesome video! I still can't wait for you to open the gift I sent you back in March! it was in a white box with neon orange ducktape! There was some hotwheels in it but the bigger better surprise that I don't want to ruin for you!
I’m excited😁😁
@@RobbieFerreira I was honestly worried that it never got to you 😅
Put the launch control at/around 4.000k rpms for flames. Trust me 🤩
MORE CIVIC CONTENT ❤️
I really dig it with the screamer pipe its sleeper but ignorant they are the perfect match in my oppinion
OMG THE SIXE OF THE FLAMES IN THE GARAGE MY BOY!!!
I strongly recommend getting bigger CV shafts from teknotic. They are massive and lifetime warranty!
chris at the end lmaoooooo
chris is a fun guy for sure!
You guys should build that motor with the sidewinder kit for big power
Pilot sports 4S Summer tires have a stock look but are extremely grippy
Yo continental dws06 tires are super nice have have fairly good grip! Not really sure about a wheel but still
This things fkn awesome good too see it actually become a car it's such a beast and can't wait untill it's %100 perfected, good shit guys keep it up
The z looks clean af
Sleeper wheel setup… nankang AR1s 205/50/15
With em1 sir wheels
Finally a civic vid!
Damnnnn dude, the content is always sick but jeez that new cam is dope
Thanks dude 🤘🏼
Love the videos just keeps getting better
dude i had the same thing happen last year to my integra. was pushing almost 240 and snapped the driver side CV in half. all the shrapnel flying off popped both my left side tires. all I was doing was a burnout...
really loving this civic man, you're starting to make me like the hatch
14:22 Chris you could say hey owes you a 'Launch Date' = *Lunch Date* ;) *****Edit - Chris is hungry for a launch*****
Whether or not if your building, driving, or blowing things up always a great vid guys.
Yes!
Love the new camera
😂 i thought the same thing when i saw it on insta. For that one guy that keeps asking .
Use a b series axel is a little more long the rsx axel is a little bit shorter
I kept looking at the rear wheels confused when he was breaking loose and then I remembered its a civic 🤦🏾😂
Integra blades, fat fives, EM1 wheels, e30 Bottlecaps.
For wheels look into RYVER SI or RYVER SAWBLADES they are basically deep dish sir and gsr blade style wheels. 15x8 +20 it would fit perfectly
roses r red
violets r blue
the civic when BOOM BOOM BOOM BOOM!!
Man I wish I wasn’t rebuilding my engine!! I wanna go to Driven Calgary with y’all😢
7:24 look at Chris hand how did I only just notice that?
anyone else notice at 16.27 the bolt hiding just behind the wategate dump spinning and vibrating as it bounces teh 2 step :D
Standard good looking stock honda wheels most run are 99-00 si, 97-01 gsr blades, 95-97 fat fives, Integra snowflakes, or 5 lug swap and have a bazillion options. If you get rpf1's people will assume there is money under the good. Kosei k1's are not my taste but are subtle and light.
ROBBIE ARE WE GONNA SEE WOOD FLOOR IN THE TRUNK PROJECT SOON 😀
Yesss
Patiently waiting for this update on the hatch
Robbie is so serious about making videos. (Not a bad thing)
Chris is just out here fucking with robbie and I love it😂
“you can hold it you can hold it” 😭
AYEE LETS GOO
Camera quality so good you can see Robbie's pores 😂
Crazy for even leaving a civic alone
I really injoy watching your videos there amazing
you should look for ls mesh wheels off an integra that would look sick!
10:35 >at that moment,…..he knew he fucked up!!!. 😂😂🤦
Robbie I shit you not, I did the exact same thing to my honda😂
Where did you get that battery hold down I want one for my z31 I am relocating it also
König oversteers would be beautiful
Hey robbie, what car should I get for my first car?
When you hit 2 step in the garage I noticed a loose bolt spinning in the background ! Watch out Robbie check that bolt ! Love the ALL the builds you got going
I noticed that too at 16:30 ish
Suddenly I need a daily for my daily
Robbie if you want some nice stock looking wheels I'd say enkei is a good option. They have some decent multispoke options
time for insane axles my boy
We think Robbie might be calling Driveshaft Shop soon lol!
The beat from 3:30? Does anyone know how can I find it?
What camera Robbie?!
Insane shafts. 500hp Axles.
Got this notification and bam 34 seconds later start watchin fuck yeah
Gotta carry that 1st gear out a little further pimp 😎🤙
Also need a traction bar no wheel hop 👌🏽
press F to respect
Anytime I’m watching another video and you post, I click on yours and just finish the other one I was watching afterwards
❤️
Robbie looks l like the guy from brothers 2009
AYEEEEEE VIDEOSSSSSSS
I'm back lol Watching after work tonight
Buy a harbor freight winch I have the 5k and it gets the job done… I think they have a 10k one if you want to do a full send but I just use a snatch block for heavy cars
Enjoy it while it’s quiet! The more you 2-step, the louder it gets!😏😂🙈
Same thing just happened on my 98 Eclipse GSX. Thankfully yall were doing launch control and only going so fast. This kinda thing coulda been way worse.
Wasaga !!!
Some TR Motorsports C1 would look nice my guy!
Love the car build, love it!! but hate the clutch noises...🥴
did u change the subframe to go k swap?
🔥🔥🔥
Sick like it
Oh I hate this brief moment when you just heard fck something went completely wrong....
WOODEN TRUNK ON THE EK
Hey what exhaust you have? And nice build btw
What camera did you get though???
You get yourself a humble performance turbo kit?
honest opinion u should make the "be back soon..." note a sticker I would gladly buy that
I'm curious how "style 5" from bimmer would look on the civ 🤔
Are you going to sell old turbo kit locally?
Yea we are keeping some piping and stuff so technically won’t be a full kit, but will sell whatever we don’t keep locally!
Great, now he can get his groceries...
With two-step
Step 1: order groceries
Step 2: pick up groceries
@@ZacCjw You obviously don't know what I'm talking about.
You obviously couldn't see the joke 🪞
@@ZacCjw it's okay, you're having your mid-life crisis.
Oof ok boomer
get a set of silver or bronze Enkie RPF1's or change to 5lug hubs and get a set of 2012/13 Civic SI wheels or RSX type-s wheels
#staycommitted
Lit
that muffler/exhaust is probably killing the flames quite a bit
"Sleeper"
That rear end's gotta go up a little bit for it to look stock
All your vehicles should have a cheap harbour freight tool kit in