The Ultimate DIY FLOAT TUBE ROD HOLDERS SETUP!
Vložit
- čas přidán 3. 08. 2024
- Looking for the plans to create your float Tube/Belly Boat rod holder? Well I have the Ultimate DIY Float Tube Rod Holders Set Up for my Outcast Fishcat 4 Deluxe. This design has two rod holders, phone holder, pliers & fish grips on DIY Leashes and a GoPro Boom. Everything you need to modify your Float Tube/Belly Boat.
Wendell Fishing Merch ➡️ wendellfishing.myspreadshop.com/ ⬅️
⬇️ CUT & MATERIALS LIST BELOW ⬇️
⏱️ TIMESTAMPS ⏱️
0:00 Intro
0:26 Modifying the FishCat 4 Deluxe
1:10 Rod Holder Design
1:26 Materials Needed
1:38 PVC Vs ABS
2:30 Cut Lengths for 1 1/2 inch PVC
3:21 Cut Length for 3 inch PVC
3:35 Cut Length for 3/4 inch PVC
3:53 Materials List
5:04 Modifying the Rod Holder
6:00 Drill holes for Leashes and Fish Grips
6:25 Drill Hole into Cap
7:35 Build the Rod Holder
9:34 Velcro to FloatTube/BellyBoat
10:26 Make Marks and Begin to Glue
11:27 Flotation Option
12:17 DIY Leashes for Pliers and Fish Grips
16:15 Attach Your Phone Holder
17:25 Test Rod in Rod Holder
17:48 Create and Attach Final Rod Holder
18:46 Add Go Pro Attachment
19:32 Video References to DIY Rod Holders for Spincast and Baitcaster Reel
🧰 MATERIALS & CUT LIST 🧰
🚣🏻♀️ - FishCat 4 Deluxe Float Tube: geni.us/Fishcat_4_Deluxe (Amazon)
✅ - (1) 6' - 1 1/2 PVC (Cuts Below): geni.us/PVC_Pipe6Ft (Amazon)
- (2) 11 1/2"
- (1) 10"
- (1) 9 1/2"
- (1) 8"
- (2) 6
- (3) 2"
✅ - (1) 5" Length - 3" PVC: geni.us/PVC_Pipe3Inch (Amazon)
✅ - (1) 25" Length - 3/4" PVC: geni.us/PVC_25Inches (Amazon)
❌ - (2) Crosses - 1 1/2" PVC: geni.us/PVC_Cross (Amazon)
✔️ - (2) 45's - 1 1/2" PVC: geni.us/PVC_45Degree (Amazon)
🌪️ - (2) 3" to 1 1/2" Reducers: geni.us/PVC_Reducer (Amazon)
✔️ - (2) 90's - 1 1/2" PVC: geni.us/PVC_90Elbow (Amazon)
✔️ - (1) 3/4" Cap: geni.us/PVC_Cap (Amazon)
🌳 - (1) 1 1/2" to 3/4" Bushing: (geni.us/PVC_Bushing) (Amazon)
👍🏽 - (1) 1/4" Thumb Screw: (Hardware Store)
✔️ - PVC Cement: geni.us/PVC_Cement (Amazon)
🎞️ - Pack of 6 Velcro Straps: geni.us/Velcro_6Pack (Amazon)
🤳 - Raxfly Cup Holder Phone Holder: geni.us/Raxfly_Phone_Holder (Amazon)
📷 - GoPro Tripod Mount Adapter: geni.us/GoPro_Mount (Amazon)
🧰 - Boom's Pliers: geni.us/BoomsPliers (Amazon)
🐟 - Fish Grips: geni.us/9KUhQc (Amazon)
🧰 - Expanding Foam (Optional): geni.us/Expanding_Foam (Amazon)
🐖 - Old Pigtail Phone Chargers (Local Thrift Store)
🤐 - 8" Zip Ties: geni.us/ZipTies (Amazon)
🔓 - Carabiners: geni.us/6hAzQq (Amazon)
🧰 - Heat Shrink Tubes: geni.us/aqyDzP5 (Amazon)
🧰 TOOLS NEEDED 🧰
🔥 - HeatGun: geni.us/mCUaI (Amazon)
VIDEOS REFERENCED:
📽️ - DIY Rodholders for Baitcaster Video: • DIY Rod Holder for Bai...
📽️ - DIY Rodholders for Spincasters Video: • DIY ROD HOLDERS for yo...
CAMERA GEAR USED:
📸 - GoPro 7 Black: geni.us/Go_Pro_8 (Amazon)
🤳 - Manfrotto Monopod: geni.us/Manfrotto_Monopod (Amazon)
🦍 - Gorillapod Kit: geni.us/Joby_Gorillapod (Amazon)
🎥 - Ulanzi Go-Pro Casing: geni.us/GoPro_Case (Amazon)
🎙️ - Rode Mic: geni.us/Rode_Mic (Amazon)
📷 - Gopro Chest Mount: geni.us/ChestMountHarness (Amazon)
SOCIAL:
👍 - FACEBOOK: / wendellfishing
🕦 - TikTok: / wendellfishing
💻 - Website: www.WendellFishing.com
#WendellFishing
As an Amazon Associate I earn from qualifying purchases - Sport
I might need to get into Float Tubing now!
For sure! Can’t wait to get back out on the water!
Just did going bout Thursday for the first Tim’s at Lake Havasu with buddy🤓😎
Man... great video walk through. Well done!
Appreciate it!
Great video on using PVC but best of all was the DIY on the accessories pliers & extra rod!👍👍😎.
Thanks keep the videos coming, sending to friend!
Right on Darryl!
👍
Thanks
Looks great 😊
Thanks!!!
Great video, do you think you can do the same setup to both side without it being to heavy?
At that point, weight wouldn't be your issue. I would imagine your inability to cast would especially if you are carrying additional poles.
Where the link to the velcro straps?
Here ya go boss: geni.us/Velcro_6Pack