Printable UAV build guide - Eclipson Model X
Vložit
- čas přidán 6. 09. 2024
- Build guide of our 3D printed UAV platform Model X. Read more: www.eclipson-a...
The aerodynamics has played a main role since the conceptual design phase with the sole objective of traveling with a big payload, further and consuming the lowest energy possible. Its fuselage has a huge internal space where you can access easily from 3 canopies, you will have a huge freedom to install any kind of electronics depending on your goal: Autonomous flight, solar powered flight, FPV flight etc
Great work, I think that I'll support you and buy your great design. I'm in a year long proces of scratch building a 3 meter WS plane of the exact same configuration. I design the parts in Ligthburn and cut them (/have them cut) in plywood and balsa. I recently got a 3D printer, so now many of the parts are done on the Prusa, for example the leading edges of the wings and the inverted V tail joiner. So I know how much work you have put into this, and the 39EUR is probably a steal unless you will sell thousands of these. Good luck with the business!!!🤞
Thanks for the support ;)
Perfect creation
Just purchased from canada, printing now!
Thanks! Have fun with it ;)
@@eclipsonairplanes You should add comments to your product pages so customers can chat about the plane, or even a review section. This build is extremely nice. I am very impressed and I don't have a place to express it on your website. So far very easy to print, parts are coming out percent they look injection molded on an Ender 5 Pro with Cr Touch.
This is a beautiful model
At 6:02 it looks like the part goes in backwards, compared to how it fits, and later in the video at 6:14 the bulkhead part is flipped..
I'll buy an EDF version of this within 3 seconds of you guys posting,
Would also love to see down facing cameras for surveying
Beautiful plane. Might give it a try with shrinking it down and making a micro 😁
Very nice!!
Чертовски красивая модель самолёта 😊 ❤
Nice job!
hell yeah ! that makes me want a 3d printer.
I purchased one a couple years ago and it has been every bit as much fun as I hoped it would be.
Learn to use some CAD software while you decide which printer to get. A 3D printer's real strength comes when you can design and print your own parts.
@@ddegn the ender 3 pro is the model i ordered. i think it's a beginner friendly printer and i here good things about it.
@@andyvonbourske6405 How are you finding it so far?
Is this designed to glide well? It looks to be but I'm not an aeronautical engineer by any means.
That'd be massive for maximizing time in the air (from my incredibly novice standpoint)
Yes the model glides very well.
Would be great to have a EDF conversion
second this!@ and moving camera in nose|!!
Very nice....🤔😳👍😀🇬🇧
Awesome!
Love IT ❤️❤️❤️❤️❤️super 👍
What is the estimated range and flight time with the recommended motor and battery?
Any real problems printing this on a Bambu lab A1 printer?
We have not tested that model specifically but I am sure it will works. You can try the free model (wolf)
Salut, je n'ai pas vu le contrôleur de vol ?
Can't seem to locate the interconnectors for the fuse
Which airfoil do you use? How much geometric and how much aerodynamic draft does the wing have?
Dang its my first plane build so I'mnew to all this. Now these tpu connector things to connect the ailerons (?) To the wing. I think mine are to slim, the ailerons and the flaps keep falling off. How thick do they have to be exactly?
And, is there a place to ask these kind of questions?
Nominal thickness is 1,5mm. You can use our FB group to ask and also to share your builds: facebook.com/groups/146642260886244
@@eclipsonairplanes thank you
@@eclipsonairplanesso I checked it in Bambu slicer, the STL object is definitely only 1.0mm in Z axis. So there might be an error either with the file or in Bambu slicer.
Sadly I have to reprint all flaps and ailerons as I already glued in the 1mm hinges 😅 I can't get them out anymore. Well that's what's nice about printing it yourself right, and the prints are also very cheap, using like 6g per print is super cheap
Bravo.perfect
Can you recommend a printer Thanks
Keld
Copenhagen DK
Check out our website for a list of recommended printers!
Great model! I think I was the first to watch this video! Also the first to put "like"! And you get this "like" from Russia!
Bayraktar tb 2 model... 😊
Though looking beautiful but I sworn never touch another tail on wobble poles structure again.
Why isn't there a PLA gcode for fus4?
You should print it with LW-PLA. In the drawing you can see that information.
can you please let me know the front wheel size?
D40 too. The wheel is 3D printed