2011 GMC ACADIA ,NO CRANK, NO START
Vložit
- čas přidán 12. 06. 2017
- FUEL GAUGE INOP, TRACTION CONTROL OFF, DUE TO NO COMUNICATION FROM PCM,TRANS CONTROL MODULE,ABS MODULE,THE SOLUTION IS REPLACE THE ABS HARNESS CONNECTOR ,WHEN REMOVE IT ,IT CRACK CAUSING BAD CONNECTION WHEN CONNECT IT BACK ,JUST TRANSFER WIRE BY WIRE TO THE NEW CONNECTOR.
Hit the nail on the head. Just R&R'd my subframe to swap trans and no start. Thought I'd plugged in firmly to the ABS module only to find out both plastic pins had broken in the connector, stopping me from inserting completely. Thank you!
After a few hours of checking and rechecking wires and fuse box and techm and security system your video solved the problem straight away. Thank you so much!
MIL GRACIAS POR LA LLAMADA... Tu asesoría me fue de mucha utilidad, la verdad hoy en día cuesta encontrar a alguien que te ayude de forma honesta y desinteresada, este canal es de mucha ayuda para bastantes personas que al igual que yo han requerido de un buen Técnico Automotriz como tú, que lo más curioso es que haz ayudado a muchos (desde un teléfono) sin necesidad de que lleven su auto a una agencia o a un taller donde muchas veces sólo te estafan y no solucionan el problema....Éxitos y Saludos cordiales Juan
Gracias por tú comentario,es para mi una gran satisfaccion poder servir a personas como tú y otras que aprecian mi esfuerzo por darles una solución a sus fallas en sus vehiculos.
Tengo problema mi acadia 09 no enciende solo da start pero no se mantiene encendida los mecánicos me dicen cambiar motor pero no confío en new Orleans les sale más fácil a ellos cambiar motor y pueda q este bueno
@@itzdragonlover1800 disculpa no habia visto tu comentario espero ya se haya solucionado el problema de tu vehiculo y puedas compartir cual fue la falla ,puede ser de mucha utilidad para más personas.
Exact same issue. You saved my ass sir thank you. Very informative.
Great video this is exactly the problem I'm having with my 2008 gmc acadia no crank and no start was driving and the car went right out on me and would not start back up after I will try this next
My friend you are a life saver! I’m currently in Puerto Peñasco Mexico on vacation with my family. My car had this exact issue. We were thinking starter but saw your video before we went into town to buy parts. I jiggled that harness and the car started so thank you!
Its nice to read this type of comments,and nice to be at Puerto Peñasco, go to San Carlos if you can. Enjoy your Vacations.
The poor car just wanted to stay in beautiful Mexico and you wouldn't let it. 😢
@@cjuanchy would this cause a vehicle to stall while driving
@@hilariousJSmith yes it is, remember that it cause to loose communication between modules
Nice work. The customer will be happy. No more wondering if the car is going to fail or not when driving and hit a pothole. Thank you for the great video.
Que bueno que existen jente asi, yo le estuve ayudando a mi hermana a revisar su 07 Acadia y padecia de los mismos simtomas y honestamente gracias a este video que hice exactamente lo que el estaba haciendo con esa y parecio q eran los cables de un lado de donde esta el (air filter box) muchisimas gracias x el video fue de una gran ayuda!
Gracias por tu comentario.
Solo moriste los cables o algo así, o cual fue el procedimiento?
Quiero agradecer la atención prestada al Señor Juan . A mis preguntas y hacerles saber que gracias a su ayuda y consejos pude solucionar mi problema siendo que ya había llevado la camioneta al eléctrico sin tener una solución
Fue lo mismo que le encontró el mecánico del video? Que le hiciste podrías compartirlo
Thank you so much for this video. I did a full timing chains job on this 2013 Acadia and i had the same issue. No communication with ECM/ TCM/ ABS. I unplugged and plugged back many connectors to no avail. When i came looking for ideas, i found you video and that connector was simply not pushed in fully. Once i corrected it, the vehicle fired right up. Thanks again brother.
Im glad you were able to find it, Thank you for watching.
This video led me to my no start prob.
THANK YOU!!
Gracias carnalitos por ser tan humildes y professionales que DIOS los siga bendisiendo con salud para ustedes y su familia gracias
Lino Lozano Gracias por el apoyo.
Lino Lozano Ola amigo tengo el mismo problema con mi 2008 enclave
@@joseponce9518 si hace lo mismo que en el video ,solo cambiale el connector de plastico del Modulo ABS,no se en que parte te encuentres.
José Ponce Ola carnalito estas ai para hablar
Mr. Juan
Su video fue muy util para mi. You save me from calling the tow truck and getting ripped off from the dealer. I also have a 2011 Acadia. Mi problema era el mismo. It wouldn't start or crank. Just a tick sound. I checked all connectors just like u described in ur video. (The ABS module/ Engine Module/ and all other connectors that I thought it could help) I cleaned all of them with QD Electronic Cleaner and boom! Car has been starting ever since. Muchas gracias don Juan. Ojala siga poniendo videos de este carro. Por medio de CZcams ya le e compuesto las brekas y cambio de aceite. Cosas menores. Pero cuando se trata de cosas grandes.. prefiero llevarlo al mecanico. Al menos que yo pueda.. yo lo haria.
Un gusto saber que le haya servido mi video,muchas gracias por su comentario,cualquier cosa para servirle,Im glad that my video was helpful ,if anything Im here to try to help you.Thanks for your comment
@@cjuanchy buenas tardes tengo en mismo problema y ya moví los arnés pero no prende q más puede ser el problema le agradezco su ayuda d antemano
Alfredo Rodriguez , necesito saber que hace exactamente , da marcha? O si prefieres enviame un número a donfe te pueda yo llamar
@@cjuanchy no da marcha
@@alfredorodriguez245 alfredo encontraste el problema?
exact same issue. thank you for the video. you saved me from pulling the starter.
I pulled the starter, motor mount and bracket, installed new starter and bracket and mount. Same thing, no crank, no start, defenantly gonna check this tomorrow.
I been having same problem with my 2011 Acadia thanks for the help really thank you
Did u fix the problem
Buen diagnostico primo Juan!!!!!!!!! Gracias
Same my problem now, check all fuses and relays on fuse box,all good, change starter because it's burn,then wirings harness all good rotation and condition,but still won't work, but today I watch your videos, this helps me a lot to check all connection electrical.thank you.
Thanks for coment
Muchas Gracias, ese problema me traia loco, ya Lo arregle, Muchas Gracias Bueno Trabajo!!! Es UN Chingon!!!!!
I am experiencing the same issue currently... This will be the first direction i go in.. Thanks
My problem was something totally different (dealer gps/tracker wiring was at fault) but this video STILL lead me to the actually problem by just getting me to open the hood altogether 👍🏻👍🏻👍🏻👍🏻👍🏻
Thanks for comment, I had weird electrical problems because of a GPS incorrectly installed not on just this type of trucks, I hope people read the comments ,the problem may be diferent and learn from shared solutions, Thanks again for shared your fixed problem.
Thanks same issue great fix saved me hours !!
You just helped me on the side of the road. It worked on my 13 Acadia
Thanks for your comment
Did your car shut off in the middle of the road?
@@keshia8225mines did I literally just came off the freeway went to turn and the car had cut off
eres el mejor busque mucho en internet . es lo que andaba buscando gracias
I just have same problem today. would be nice to have more light. I will look at the video again... good job, thank you. I hope I can do it my self..
Got one in the shop now with the same problem. Ours came in with the traction and abs lights on, tech removed the air box to test continuity and then the car wouldnt start. No communication with the pcm, code co121 coo73 hatch doesn’t work and no box around the park indicator. If any of the communication lines go open these suv’s leave you stranded or the technician frustrated. Chevy Impala uses the same setup. One Christmas light goes out the whole tree goes dark that’s how these data bus systems work. The hard part is getting the customer to understand the time involved in finding the loose connection somewhere whether under the passenger seat or at the EBCM. Good video pointing out a common issue.
Thanks for the comment,It is hard to make customers to understand that when its electrical problems we never know how long is going to be to solve the nitemare,make sure your connector to de ABS MODULE makes good connection on my case it was the problem,I replaced just the plastic part, transfer wire by wire and problem solved,Good luck fixing yours.
You ever figure out the issue? Same thing for me on a 2010 gmc acadia. Traction control light on, no[] around park on dash and wouldnt crank. Disconnected the negative battery and it signifies its in park and will start.
Thank you so much! What a great discovery! Great mechanic, very thorough!
Thanks for comment
@@cjuanchy where are you located and wat was it called wat you fixed
@@tabathahorne7735 Its called exhaust VVT (VARIABLE VALVE TIMING) I dont give my personal info here, If you like send me a email to penita33@hotmail.com
And I Tell you my Location sorry.
It's hard to find good guys like this - like gold!
Nice work Bro. I get tired of the rip off hacks out calling themselves technicians. Thanks
Is nice to read that type of comments Manny,Its a Pleasure to serve you people
Sadly here in my town I don’t know of a mechanic that isn’t a crook. And the only honest one we had retired!! I have been doing a lot of repairs myself to save me big bucks. The last time I had my car in the mechanic said I needed new struts on the front and rear. What he didn’t realize was that I changed them myself no more than a year and a half ago! He got busted trying to rip me off. I won’t ever go back. Sadly his dad used to be honest. Guess he didn’t teach his son that trait.
thanks helped me on 2006 Caddy DTS this was a solve to communication
Im glad it helped you
Thanks man this video helped a lot. Good info on this Buick flaw they got.
Muchas gracias por compartir su experiencia reconocidamente muy tecnica! y facil de entender.
Gracias por su comentario Gabriel.
Happened to me also! Thanks so much! God bless!!
Edward Flynn Amén, Thanks for your comment,God Bless you too.
You have given me hope brother.. I'm having a similar issue with a traverse..i was starting to think the car wasn't fully in park because the indicator wasn't showing so I figured that was keeping it from cranking..thanks!!
I hope It helped you
My friend these cars are scrap metal,F gm and chevy,all junk,but their trucks are good lol
David Matousek I 100% agree.. will be the last one I ever buy 😐
Yooo, my car is having the same damn problem. Had me stranded from 9am to 7pm till i founf a ride, car wont turn over, i thought the damn thing wasnt fully in park and i thought it was stuck. Its still broke down, but now im watching youtube videos to find a solution
Very good and informative video. Thank you Sir.
Thank you for watching
I am having this exact problem with my GMC this was a big help
Im glad that the info helped you
CJ
Thanks for the video. You showed the exact same symptoms I have. Keep doing what you do!!!!
Thanks
Love this guy the best mechanic ever
U saved me
Thanks.
cjuanchy I have a traction control problem with this 2013 GMC Arcadia it keeps going off and coming on and I changed the brake position system sensor up under the dash didn’t work can u give me some tips of wat u think it is...... If u have to I will give u my
Number
give
Great job of actually diagnosing the source of the problem. This would be very difficult for an amateur - or someone without access to the wiring diagrams. Thank you for taking the time to post this video for all to see since many, many Lambda owners are going to be dealing with this (as well as several other) engineering flaw(s) eventually...
I have the same issue. Just replaced those intricate timing chains on a 2009 Traverse 3.6. What a nightmare. I dropped the subframe, easier than trying to do in frame. Now it won't start. Doing same thing this Acadia is doing. Currently trying to figure it out. Thank you for the video, great job.
Make sure to have all your grounds at the timing cover and the fuse box connectors
@@cjuanchy It was the SAME connector!! I couldn't believe it. I pulled on it and heard the ding.. thank you VERY VERY MUCH, I underbid this job & needed it done. My Mitchell program said 8.9 hrs.. yeah right! Thanks to you, I got it!!
@@jett-rampartflyer2852when I do it ,I remove the engine and trans as an assembly and takes me about 22 hrs
@@cjuanchy I did the same, dropped the subframe. Took me longer than 22 hours. I'd not done one before. Engine now sounds fine, just have to take care of a code p2176 that won't go away. 'Throttle adaptation- idle not learned.' I dont have a fancy scan tool to do an idle relearn. Tried a procedure i found online but so far hasn't worked. Its the only code I have, too. I should mention the throttle body harness is held on by a zip tie as someone broke the clip on it before it came to me. I tried cleaning the throttle blade but still no luck. Maybe tomorrow will be better.
@@jett-rampartflyer2852 If the throttle plate was moved by hand, it will not going to be good any more
Thank you so much! You just saved me so many hours of stress!
Its good that it helped you
@@cjuanchy 😢I spoke too soon. My car is doing the exact same thing so I thought for sure it would work. Back to square one.
@@courtneyspencer5881 wiggle the wires
How do you know if the neutral positioning switch is bad?
@@courtneyspencer5881 with a scanner ,you have to have communication ,then pull codes
Thank you for that video you saved me so much time appreciate you
Thank you for watching
@@cjuanchy le puedo llamar con una pregunta x favor es urgente
@@JuanCruz-ud6yh si claro me puede mandar su número a mi correo? Y de donde es el número porque aveces no me dicen que es de Mexico y me toca adivinar
Excellent job ( buena informacion) Saludos
Appreciate it brother its worked for me 👍💐💐
Glad to hear that
Excelente video , Muchas gracias por tomarse el tiempo y compartir ! Tengo el mismo problema con mi Acadia del 2008 justo esta mañana hizo eso por primera vez. Le envié un correo electrónico con unas preguntas referentes al video . Espero recibir respuesta pronto !. Gracias de nuevo .
Gracias por comentar, no me a llegado el correo con sus preguntas Faby.
Gracias ! , mi pregunta era l siguiente ; el cableado que usted arreglo , ejerciendo presión en el , lo reemplazo completamente or you just tide up ? If you replace it can you please told me where can I order from? Muchas gracias
No se reemplaza todo el cableado solo el conector de plastico donde entran los cables para conectar en el ABS Module, Orelys auto parts lo tenia.
Me podría decir cómo se llama en inglés . Y nuevamente muchas gracias por tomarse el tiempo para responder 🙏🏻
EBCM CONNECTOR
I have same problem on my car Acadia 2013 I did same what you did but still no change if you give me any advice I am also a technician but for locomotive full respect you are great I wish I get your experience
Muchas gracias amigo me fue muy util este video . mismo problema acadia 2012 . solo movi el cable e iso como un clik y ya enciende bien . estoy feliz que me isiste ahorrar dinero .. Muchas gracias por compartir tu sabiduria Dios te bendiga. Saludos de Durango Mexico
Gracias a uds por visitar el canal, me da gusto que los videos les sirva
@@cjuanchy nissan altima 2006 6 cil. Tarda en ensender solo da marcha y cuando prende al meter el cambio lo mete muy agresivo da el tiron bien fuerte para delante y en reversa , pero para delante si da el tiron agresivo y al avanzar esta todo devil sin fuerza le acelero bastante y avanza muy poco...el escaner me marca sensor de arbol de levas banco 1... El caso es que ase 7 meses me isoblo mismo . fui con un electrico y me dijo que era la transmisión que el me lo arreglaba pero era trabajo caro y lo arregle 7mil pesos me cobro como 340 dolares .. El electricio me dio 2 meses de garantia y todo muy bien hasta el dia de hoy volvio a fallar igual con los mismos sintomas.. Alguna recomendacion amigo que me pueda dar e escuchado q esas transmisiones son muy defectuosas lo que pasa que tengo muchos años con este carrito lo traje de Wisconsin ase 10 años tiene ya 280000 millas . creo tener 2 obciones ir de vuelta con el electrico y que me diga si asi ba a estar fallando porq no me conviene es mucho dinero para q lo este asiendo muy rapido y la otra seria ir a un yonke y buscar la misma transmision..... Si me pudiera alludar con alguna recomendacion se agredeseria muchisimo hermano
Circuito del sensor A de posicion de arbol de levas (banco 2)..... Lo acabo de escanear y eso me marca oiga
Me puedes enviar un numero a donde te pueda llamar para preguntarte mas sobre tu camioneta? A mi correo penita33@hotmail.com
@@cjuanchy listo enviado amigo
Muy buen Video. A mi me pasa igual aveces con mi 2008 Acadia. Entonces ahora ya se cual es el problema. Gracias por la información. Saludo desde Raleigh North Carolina
Chrys 22 ,si ese es tu caso,solo cambiale el connector,lo venden en Oraillys sin necesidad de comprar todo el harness,saluditos un placer ayudarte.
cjuanchy me puedes a ayudar tengo una ARCADIA 2010 veses prende a veses no ya le cambié la marcha y nada
@@orlintabora1555 encontro el problema ?
Great video Juan ! 👍🏼
Thanks
thanks you saved us we had same problem thanks again
Gracias eso me facilito encontrar el problema en mi carro gracias gracias
Thank you...... You save me a lot of money and I'm watching you from now on......
Its a happyness to help you and others
Muy buen mecanico Felizidades
Gracias.
A LA VERGATION PAPI YOU SAVED MY LIFEEEEEEEEEEEEEEEE I WANT TO GIVE YOU A HUG MY FRIEND
Thanks
Aquí les dejo mi testimonio 👉🏼 bueno yó tengo un GMC ACADIA 2008 y me empezó a marcar (check engine) el Mecanico le puso la computadora y me marcó 2 códigos (p0014 & p0391) el punto es q me dijo q ivan a tener q sacar el motor para poder arreglar ese problema y por ese trabajo sería de $2’200.00 a $2’500.00 y como a mí se me hizo una cantidad súper alta pues no podía creer lo q me decía el mecánico, así q empeze a buscar más información sobre ese problema y empeze a mirar vídeos en CZcams y de un vídeo a otro me llevo aquí! Y pues yó lo veo como cosa De Dios x q Gracias a este vídeo me pude poner en contacto con está gran persona q sin dudarlo me ayudo y bueno resultó q a mi carro solo le faltaba aceite y pues sí después de ponerle aceite mi carro sigue corriendo normal. Así q de ir a pagar como $2’200.00 + solo resulte pagando $55.00 y todo gracias a esta persona q es tan humilde. Gracias 🙏 por ser tan humilde que Dios le regrese todos sus favores en bendiciones. Súper agradecida con usted! 🙏
Gracias ,por su comentario Patty Barragan, y testimonio, es una satisfaccion poder ayudarle a quien necesita,y motivaciones como la que ud hace es lo que me lleva a poder compartir lo poco o mucho de mis conocimientos,una vez más Gracias por tomarse el tiempo de compartir su experiencia.
Me puedes contactar.con.el para explicarle..mi caso... tienes su num.tel
@@angellara1169 escribeme tu numero a penita33@hotmail.com
Tengo una GMC Acadia 2008 pero oy no quiso arrancar quiere pero no ledi cables y no como que la bateria carga pero no lo suficiente
@@joseavelarlugo8873 Si fuese la bateria baja ,cuando le pases corriente deja que se cargue un ratito antes de intentar prenderla,de lo contrario puedes ahogarla y se te complicará prenderla.
Very nice work amigo.
Great video, thanks for sharing
Thanks for your comment Mike M.
Agree thank you sir awesome directions and find
@@harleyrn1393 Thank you,for your comment.
thank you!!!! straight forward, fixed!!!
Wow. Thank you. It works!!!!
pttazwilliams ,Thanks for you comment
Great advice sounds like your a mechanic I would take my car to
Excelente video! Muchas gracias por compartir sus conocimientos
Con mucho gusto.
Great Video. Thank you
Thanks for comment
Thanks....great video
Muy bueno Gracias
David Plata gracias por tu comentario
Mas perfecto no te pudo aver kedado el video gracias problem fix but a Buick enclave 2009 was mine but it was the same thing
FERNANDO CONTRERAS ,me alegra que te haya servido ,yo cuando tenia el problema no encontre nada de informacion pero vi que habia muchas personas con el problema pero no respuestas y cuando encontre el problema ,decidi compartir mi caso para que ayudara a quienes lo necesitaran,gracias por tu comentario ojala a muchas más les sirva la info.
Just came across this video very helpful 👍 good job am having the same problem with my Acadia 2017 ? And thank you again
Im glad to know that the info on this video helped you, Thanks for watching and comment.
Good vid fr
Esos Zip ties como ayudan mucho. Mi troca esta lleno de puros zip ties. Gracias
Chingon!!! Gracias
Wow! Nice thank you!
Lola Sanchez You are Welcome
GMC Should reimburse every one of us Acadia owners that purchased one of these horrible rigs! Sooooo many issues and no help from GMC
Facts
As well as all the Lambda platform vehicles!
Colega Saludos, Gracias por el aporte!! EXCELENTEEEE...
Gracias por ver y comentar
Awsome very helpful
Good detection. Owner should get the dealer/GMC to replace the harness free.
Thank you so much for the video
Great video 👌👍🏻
Thanks for your comment.
thanks you sir you the best
Your videos will be welcome in Spanish too, friend. Los esperamos.
Buena sugerencia ,Gracias Pedro.
Very useful video
Zaheer Abbas Zaheer Abbas Thanks for your comment , Im trying to get everyones to share theirs results so other people get helped .
Your the man dude thanks🤟
Thanks
No its older video but got one at the car lot I work at and we pulled it in the shop yesterday and drove it around then this checked all fuses and has a good battery so will definitely try this tomorrow when I get to work
Is it possible to replace the ABS Harness Connector? If so...do you have a part number?
theres a certain amount of times you can disconnect connectors with gm vehicles after that you develop lose terminal tension
Deberás mil gracias a su dedicación a este canal . Sin tener algún lucro . Ojalá así fuéramos todas las personas , de poder ayudar sin lucro. Creo este señor es una magnífica persona ***** cinco estrellas para mi nuevo amigo .
Alejandra Sanchez Muchas ,Gracias es una satisfaccion poder ayudarles,compartir algo de mis conocimientos y lo hago con mucho gusto.
cjuanchy donde ed
cjuanchy donde esta su taller amigo
Ya tienes otro nuevo supscriptor gracias por compatir tu vendito conosimiento
Gracias por suscribirte espero te sirva la info del video.
cjuanchy si Juan mucho no habia visto su canal pero muchas
thank you so much!!!!!
Nos acaba de pasar eso aun no la revisan en el dealer, pero no enciende nada del tablero , tiene pila nueva. Sera el.mismo problema?
YOU ARE THE BEST
Thanks.
My 2011 acadia is doing exactly this!
Have you try t find the problem?
I love you man thank you!!!!!
Muy buen video pero sería más visto si fuera en español gracias
There’s water on the fuse box behind the glove box from the sunroof because the drains are clogged on the driver and passenger side pillars; or there’s water on the floor because the air conditioning drain plug is clogged on the floor board behind the middle console panel by the gas pedal.
Most likely is due to clogged sunroof drains
That was awesome
Good god...Garbage Motors At their Finest!!!😂😂😂👌...Niiice find bye the way Mane👍👍👍💯...After spending all morning on this persons 11 enclave, cleaning all grounds, guess i moved the harness, & it fired right up...put the airbox back in, back to no crank...& as i sit here eating lunch, Your video pops up & i Now recall that Exact Same Goddamm connector, giving a fight coming apart.....Ill be Dammed...Yeup, Thank you For the Video, Dead on !!!👍👍👍👌🍻🍻🍻🍻
Hi
I have a skoda Yeti
After the timing belt replacement, everything working fine for 1 hour. Then the car does not turn on and the immobilizer light wont blink while turning on the key. Cannot connect to the ecm with any readers.
My mechanic checked for fuses and connections. Everything looks fine. Now he suggested that it can be a faulty BCM or ECM. What do you think?
Hi, First you need to scan all modules,it souns like mechanic may forgot to connect a ground or some connector, or you are having some issue with security system,by scanning all modules ,the codes gives more idea where to look at before replacing expensive parts.
@@cjuanchy
Thank you for your reply
I'll ask the mechanic to thoroughly check the connections again. But how come the vcds not connecting to ecm?
@@AjmalBabusinger remember that all modules have powers and grounds and if one of those are missing its enough to give you trouble
Thank you so much
Fixed the issue. It was a loose wire on the crankshaft sensor. Fixed it and now the car runs fine :)
@@AjmalBabusingerIm HAPPY that your car is fixed, and also Thanks for sharing what fixed your car, It may helps somebody.
Tengo el mismo problema con el mio de 2012. Me marcas traction control, air bag, check engine y aveces no me funciona el marcador de gasolina. Voy hacerle el trabajo Este y te aviso comp salio. Gracias!
Antes de que lo hagas asegurate que todos los conectores esten bien conectados
Hi there , so how Would you Repair the Harness ? Would change all the Wires or just the
Connector of the Harness ?
Thank you ..
Just the plastic part,all you have to do is just swap wire by wire from the old plactic connector to a new one.
Hey! Where are you from? I really need my Acadia worked on! It's doing the exact thing and my husband would pull on that wire and what do ya know it works. We want to change the wire
Justin Basham You dont have to replace the whole harness ,I just replace de plastic connector of ABS CONTROL MODULE,just transfer wire by wire to its position very careful not to put any wire on any wrong position.
cjuanchy well now it's not starting at all even if we pull the harness.. it's clicking but nothing the last 2 weeks or so it has been doing this and it's been taking it longer and longer to start and today nothing hasn't started at all. I'm taking the air filter off now.
Did you ever find out what was the cause? How did you repair it and cost?
thanks soo much.
I changed out my timining chain on a 2010 Chevy Traverse, because it was throwing codes for p0008 and p0017. I finally got the car back together and now I'm recieving codes p0336 and p0122. I'm not sure what to do at this point, we followed the cloyes video and used their chains, so I believe that we did those correctly. Do you have any ideas? Also, I just change the Crankshaft position sensor before I did the chains, because I thought that was the orginal issue. and as of now it seems as if it wants to crank, but it won't turn over.
Did you ever figure it out?
same issue as of today!
Thanks so much
Buenas Tardes Señor, Tengo una Acadia 2008 que hace lo mismo corriendo, es decir, de repente los indicadores de la gasolina y de la temperatura se van a cero, prende el check engine y me marca traction off, despues de eso ya no quiere prender pero al poco tiempo se restablecen los indicadores y ya prende. Es una falla intermitente. Cree que sea este conector?
Has this prob last year now its back. My mechanic found nothing, speculated security system, since my light goes in and out. Been goin on here lately, stuck at store finally cut air off and it cranks. Still searching for answers
@@rodrickthompson2799 check your grounds by the P/ S pump