2009 Buick Enclave No start / No crank Solved
Vložit
- čas přidán 26. 04. 2020
- This is Video is solving the my wife's 2009 Buick Enclave No start or no cranking. Symptoms were we had all power going to all accessories and lights but the engine would not turn over or crank when key was in the run position. Problem would happened most often when cold outside and as the Relay began to worsen it would take more time to get it to actually crank during any weather or temps, This should also be the same fix for 2008-current Buick enclaves, GMC Acadia, Chevy Traverse and even the Saturn Outlook. Cranking relay Part # is 1350-0114 and ignition relay part # is 1350-0113 those are AC Delco or GM Denso part numbers and they are the most current ones. I prefer going to my local Buick dealership over part stores as I'm more guaranteed to head home with the correct factory part. Hope this helps. Please leave a comment and a like! Thanks for watching.
UPDATE: since I have replaced this relay I have NOT had any problems since!
How did you diagnost was the ignition switch relay??
@@juancaballero8107 so being raised by a car guy (my dad) he taught me you always start with the cheapest fixes 1st. I am pretty familiar with how cars work and know that it takes multiple things to make one thing work properly, so with this specific issue I knew my battery was good, starters never just go out without being slow or burning up, so it had to be a fuse or relay. This answer might not help but hopefully it does LoL
@@brettbeez Thanks for your reply, and your time.
Have a nice day.
Will the enclave make a grinding sound in attempt to turn over but never turn?? How would one know if its starter from relay sound wise? I have all my lights and music turn on but no turn over.
@@TheMochaangel if you're hearing grinding your starter is more than likely bad and it's not a relay.
Awesome illustration of the problem and the solution! Fixed our 2010 Enclave. The aftermarket part stores seemed to be a bit confused on how to identify the replacement. Thanks Brett!
Thank you, I was stuck at Dollar General in the heat and this worked for me!
I just took it out, blew in both ends like we used to do our Nintendo game back in the 80s/90s and I was good to go. Thanks a million!!
Haha that's awesome
😂😂😂
Wow thank you. This is what we need. More of people videoing problems that get fixed. Thank you
Great help!! My wife's car just started doing this. Thanks!!!
Your video saved the day today, man! Thanks for posting this. I replaced both relays and it seems to have fixed my issue.
Awesome! Glad to hear! Hope it stays fixed. Mine has been fine ever since i did this
@@brettbeez It happened again tonight after I replaced both relays. Any other ideas?
An absolutely fantastic video. I’m having the same problem with my 2012 Buick enclave with all the bells and whistles and trouble the other night coming home screen got darker and darker and darker less voltage all of a sudden just quit! It looks like to me it’s a simple fix it’s gonna do it. I’m gonna get one today and put it in! I’m 77 years old a shade tree mechanic from back in the 60s. This video is fantastic. Thank you so much.❤🎉😊
Awesome glad this was helpful to you! Hope it solves your issues!
Yes have been having this issue for awhile now. Thank you for sharing and will check into the relay before changing out my fuse box inside car . Somebody told me it could be corrosion due to my sunroof leak.
No problem! Hope this solves you're issue
@@brettbeez Me too, Thank you.
Omg, having the same issue please let me know if it works for you!
Bro. Thanks. just replaced 1350-0114. Truck started first try. Found my OE part at oreillys for $11. Thanks again.
Superhuman cool points to you for figuring this out!! It’s been kicking my butt for months!!! Thanks man!
My car is doing exactly this. I had to jump it to get it started. I hope this is the fix. Thanks for the video.
Update: so my car is the 2008 model and the ignition and crank take the same relay switch. However this worked perfectly. Thanks again!
2007 buick lacrosse. Same thing. I tested the battery, was good, changed anyway as older, still the same. I replaced the starter thinking it probably had shorted armiture. Same thing. The horn and crank relays are the same, swapped the two around and it started right up. Horn still works with the starter relay, but I'll get a replacement and put the original horn relay back in place. Thank you for your video, our LaCrosse did the exact same as your display did. Thanks again.
Awesome to hear!! Glad i could help!
THANK YOU FOR A GOOD SHORT VIDEO.
Mine is doing exactly the same thing. Thanks to your video, I now know what to do! Great information! Thanks!
Hope this works for you, thanks!
@@brettbeez yes! I went out to go to the doctors appointment the next day, and it wouldn’t start. I took another vehicle and picked up a relay and had it installed. Now cranks up like a champ! Thanks so much man! You saved me a ton of money that having the issue troubleshooted would have cost me. Thanks again!
@@mikev2558 glad to hear! I'm happy this video is helping out a lot of people with their no crank issues
this video helped me out so much man ! thanks! my wife has a 2010 buick enclave . same problem !
Glad to hear! Hope this solved your problem like it did for me! I still have not had any issues since replacing this relay. Good luck 🤞🏽
having this issue will get right on it thanks this video was really helpful I had no clue
Yeah most people either don't know where to start or if they do they jump on the expensive stuff first, Hope this solves your problem.
Thank you for this video! I had this issue and replacing the relay solved the issue.
For sure man! Glad to have helped!
Thanks buddy. U save me to spend a lot money . I appreciate you help
Thank you for taking the time for the video and part information detail...
Thank you! I was about to get my starter replaced
I had the same problem yesterday with my buick enclave ... Changed out the ignition relay and so far so good! Thank you I was thinking i was going to have to get a new starter or ignition switch which would have cost much more than the $25 i spent
Good to hear! Glad this saved you money
Car started 9 times yesterday with no problems after changing the ignition relay ...but then today i turned the key and it hesitated to start ....weird
@@Carolinatrampolinewrestling hesitated as in cranked over? Or same symptoms as all power no crank?
@@Carolinatrampolinewrestling I've had the hesitation issue for about 3 months (winter here). Then today it wouldn't turn over at all (had some clicking) after driving for 15 mins and parked for 10 minutes. Did you solve your issue?
Update! It has done this too me again today !! I guess these relays go out every couple yrs?
Thanks for the video!!! You saved me alot of time!!!!
Awesome! Glad to help
Replaced multiple relays for short term fixes. The relays were fine though. The issue was the fuse box not being securely mounted. It is secured by two bolts going through the relay box. They would not tighten securely, creating intermittent starting. Back the bolts out some, slide in a slip lock washer or piece of curved wire under the bolt heads, and tighten.
My 2012 GMC Acadia Denali is having the same issue too! I’m going to visit the dealership parts department. Hope this will solve it. Wish me luck! I’ll definitely update too! Thank you for sharing your video man!!!
No problem! Good luck hope one of these relays solves your problems!
Brett Battan I bought the part #13500114 at the dealership for $25.66. I swapped it out and it starts the first turn of the key! Cool! So I swapped cars with my wife at work. I get a phone call later that she had to do it 2 times to start. Damn! What do you suggest? Looking to try the least expensive route before giving up to take it to the dealership. The car has a recent battery and has been trouble-free up until this point. Thank you for your help!
@@HarryWangHungLo hmm I would say start with the other relay I mentioned in the video for the actual ignition. But 1st maybe give it a couple days of driving before running and buying anything else and just see if it works it out. And let me know, but if anything move onto the ignition relay next. Part number 1350-0113 ignition relay.
Brett Battan Thanks again for your reply! Okay, I did an experiment by waiting at least 5 seconds when I’m at the “accessory” part of the key lock then, I start the car. It works. Prior to my very first try after installing the new relay, I didn’t count 5 seconds. I simply turned the key quickly. So, my wife took the car out for errands. She made multiple stops to do some shopping. She counted for 5 seconds then attempted to start the car. So far, it has started the first time at each location of her stops. I’m hoping this is the “fix”. I’ll continue this routine. I’ll update like a month from now to all who are interested. Thank you again man!!!
Same me I fixed it too sometimes my shifter get stock in P
Damn, this video just saved my ass. Thank you good sir. 🙏
Awesome to hear man!!! 👏
THANK YOU VERY MUCH!!!
Very helpful video!
Glad to have helped!! Thanks!
Thanks for the video Brett Battan😘
Hi this video is a big help. My question is what makes this relay go bad what can trigger it ?? And if it keeps blowing relay?
I am having same exact issue with 2013 Buick enclave in 6/2023. Autozone said scanner read " good battery, good starter and good alternator". It also gave no codes. The young worker said it could be a starter relay. Your video had confirmed it. I will go immediately to buy these parts.
Hope it solves your issues!
Update: 2 days later on Monday my car wouldn't start after I went to work. The entire weekend I drove to9 different stores without incident. The guys at work tried to boost the battery They went to AutoZone to get me a new battery. It wouldn't turnover. Had to jump the new battery. It started. I took it to the auto shop immediately. I needed a new starter. I live in Texas where the heat is EXTREME. Wears out the battery and starter faster.
Excellent video ….!!!!!
Thank you!! I appreciate it
Thanks!! My 2010 doing it now!
I have just the same problem with a 2010 buick enclave. Does not happen all the time. Will try the relay fix. Thank you for the video.
Great video.
Hey thanks for the information it was right on point
Nice! Good to hear!
Great video. I'm just a little confused which relay did you replace the crank or the ignition relay I'm too cheap to buy both. I'm having the exact problem with my wife's
Had 4 enclaves over the years in my shop with no crank and found 3 of them with blown 15 amp fuses on the positive battery cable on battery under rear passenger seat!never found reason for fuses blown. But almost all had water in battery box.
I just bought a used Enclave today having the starting issues. I'm going to get the relays tomorrow. Try that out. I read your comment and I wonder if the water in the area where those fuses are blown are getting the water from the sun roofs. One things for certain, water finds its way.
Thanks!!! Gonna get lucky with chick tonight! Fixed! Problem
Hell yeah! Glad to help in more ways than one haha
Most definitely get lucky
For months!!! I delt with this problem. It went from a weak start up, to over time a very slow and diminishing start up to a point where the car wouldn't start at all sometimes. I'm talking being stranded for hours, and resorting to Superstition rituals of turning the key a certain amount of times to start it. I even unplug the battery to reset everything a few times and now I know it was only by coincidence that'd seem to would work on rare occasions. Kept getting "Full Pump control circuit code" I flirted with replacing the fuel pump, replacing the starter and literally found no other help online and even my mechanic was lost on what was going on. Finally!! I googled " Buick Enclave starts when it wants" end quote. And your video popped up first. Did exactly what you said and BOOM! Car starts up fine now. Bro, I was fixing to give up on this car. Brett you saved me so much time and unnecessary stress! Simple can't thank you enough. I don't give a f*ck that I don't follow car content on YT.. I still subscribed because I owe you big time for this one. Thanks again 🤗
I'm glad this helped you out this is why i posted the video to help anyone who had the same problem my wife was going thru, she had this problem for months and its always best to start with the cheaper smaller parts like fuses and relays before jumping in and replacing parts like alternator and starter or ignition switches. It's all about saving money DIY and process of elimination. Thanks for the comment the sub and the like i appreciate it. Happy to have helped. And hopefully I'll have more enclave videos when problems come up to post up to help
Thanks ...yes but do you respect the dear soul
U saved me thank u so much it fixed. Also anthor problem my shifter sometimes get stock in p
Glad to hear this helped. If your shifter is sometimes getting stuck it could be your neutral safety switch going bad.
Brett Battan thank you
Brett Battan this really it was the problem since I changed it no more
Brett Battan do u know where I can find nutrual safety switch? Please
@@mohag6933 I'm not sure where you live but Rock Auto.com would sell it.
Im literally having this exact problem with my 2008 enclave. Just gave it a jump and its been okay since this morning. However whats the name of the (part) you went to the dealership for???
Thank you so much 🎉❤
You’re the man
Thanks glad to have helped
Hey Brett I noticed that the iGnition (8385) 13500114 fuse is to big to fit where the IGnition (2753) fuse was. There completely different sizes.. How did you get it to fit?
I didnt replace any fuses. Do u mean relays? Where did u get your relay from? I bought directly from my local buick dealership as i originally bought 1 from the parts store and it was completely wrong. Verify u have the ACdelco part
early this year i replaced this relay also ,it started right up ,but 3 weeks ago ,drove somewhere and 3 hrs later i get in and no crank no start ,this is first thing i did ,i had a spare relay and nothing .got 2 code readers and both say po23f and uo100 ,almost a month now its driving me crazy ! ,oh it keeps blowing the #10 fuse underhood ,its the ECM FUSE ,any advice ,got a brand new battery for my test also . this happened the day after i hooked up my iphone to the bluetooth on radio ,i quickly unhooked this thing because on the way to destination it made a stupid random call lol ! now i got a blue driver and getting a few more codes .did it give you and codes ? ,,,,any advice ?
Try tightening your fuse box down there's a bolt in the center of that same panel under the hood maybe it's loose. Same thing on the passenger side foot well the body control module is under there try tightening that
seemed like i had the same exact issue, had one delayed start next time just like what you show. but no luck by changing relay no codes on my mid range code thing. suggestions welcome
Witch relay did you change there are 2 that can be changed. Crank and ignition
Hi. 2013 Buick Enclave here. New battery, but still won’t start on first try all the time. Usually by 2nd or 3rd it will. Thoughts? Does it sound more like a starter issue or should I try this first? Thx!
Does it keep cranking over and not starting? Does it not crank at all? I need a little more info if the symptoms
Hi I have the same issues I let it sit then it starts .. been trying everything.. and still does it . I’m try buying me one tomorrow. Only difference well driving it would shit off on me and not start surging lording power
Any fixes???
@brett battan. Did your enclave stop all of a sudden because of this?
No it didnt. It only happened when going to start the engine
I have a 2012 Buick Enclave it has the same problem I wonder if the same fix applies.
It should thats the same car i dont think anything change until 2014 or 2015 as far as any refreshing to the cars overall design
Your
awesome gonna try it thank you
I'm having the same issue with 2011 Buick Lacrosse CXS
My enclave is doing the same thing, everything on but won't start. It cut off on me,I sent it to a mechanic he changed starter and battery still nothing. I asked him if it could be the relay he said no, maybe electrical issue? At a loss?????
You should try changing the relay yourself.
They have superseded the relay part # twice so they are differnt updated parts?
Same looking relay but part numbers are what i stated in the video. I'm sure it's an upgraded unit
Changed the ignition relay and same thing, changed the starter relay and same thing...any guesses?
Any fixes yet?
the buick enclave /traverse / denali all have the same problems i put a new battery in my enclave i also changed the relay and start fuse still wont start so i decided to clean all the ground wires on the battery and on the fuse box using a wire brush and sand paper when i was through all grounds were bright and shiny reconnected all ground wires and terminals and the car started up very quickly its been 4 weeks now and no more starting problems before you start replacing all other parts try cleaning all ground cables
We unhooked the battery to change radiator hose, can the fusebox be loose or not grounded? No problems starting before the battery was unhooked. Buick Enclave
Side detection system ran a feed back into dash modules for me.
Unplugged them solved the problem.
Symptom no locks, no fob, no radio, no battery gauge, no crank, no signals, no power windows, antitheft light would come on and stay on when battery dropped to zero on dash.
New battery also read 11.6 volts, as well as old battery.
Side detection caused feedback, pcm told modules to shut off, and engine to not crank.
Fixed it after new battery and paid tow truck driver to bring me home.
Hope this helps someone.
My 2012 Enclave will keep cranking but doesn't start, I turn off key and try again and it starts. Any input?
Do you have any more information? Does it happen all the time? Does it only happen when getting gas?
any luck finding issue?
Hey bud I just bought an 2010 Buick enclave and it crank I drove it for about 5 miles it ran hot and it cut off and I let it cool down put antifreeze in it got a new battery for the car and still will not start what do you think is the problem
Does it still crank or not? If it doesn't crank you might have a seized up engine
Mine does the same thing,11 enclave cxl. Battery is ok, new Relay and ignition relay. It does a few clicks after trying to turn on.
Also has Service Charging Station on dash.
@@stanleyb99 do you have a bad alternator, that's your charging system or maybe a bad fuse or relay for your alternator, is it killing your battery? Check alternator 1st and all of associated fuses and relays that that, that might be your problem with both the warning and no start, if it doesn't solve the no start sounds like you might have a bad starter
Did you by chance have communication with pcm tcm abs?
No there wasn't any codes or anything
What if I hear a click also? The power goes out the same way in the first part of your video and then it clicks. If I turn the keys so many times and it doesn’t start, then I have to get a jump because it seems my battery is drained. Sometimes I have a slow turn over 🤦🏻♂️ sometimes I get a service charging system message. Now a check engine light came on so I’m going to take it to auto zone to run that code test first and then see what’s going on.
Only thing I have done so far is get my battery checked and they said it was good.
You have a bad alternator is what is sounds like to me.
My 2008 buick enclave won't start after I put the gas in ,only than and every time when I fill the gas .
It started after 3 or 4 time of trying in the gas station, peoples looks at my car suspected I'm in a big trouble.
What could be the problem?
It chunk but don't want to start and as I said only right after I put the gas. In other occasions when I started it goes well. Any ideea is welcome.
czcams.com/video/rTvzHXrmjac/video.html this is the exact problem you have. Purge valve, Replace this part literally takes 5 minutes or less. Good luck.
Thank you, I will change them
Thank you Brett .
You was right . Mission complete. I'm happy couse I save 500$
@@danielmoga3840 no problem! That was a issue i had as well and yes saved time and money! Congrats
I have exact truck in 08. My problem is will start but shouts off without warning. Driving 30 or 65 mph, just off. I was thinking bad fuel pump, but started cheapest with relay. Haven't put it in yet so crossing my fingers
Yeah you might have a bad fuel pump or fuel filter. Try those. Sounds like your fuel pump is getting hot then shutting off
I have the same problem. My Buick just shut off while driving. Do you think it may be that relay?
It will not crank just click.
Question did u disconnect the battery to change these
No i didn't disconnect it, as long as your power is off your fine
Replaced this and would not crank still. Had it towed to house and cranked with a jump at house. Has cranked every time so far for four days
If it cranks with a jump you might have a battery issue. Maybe loose terminal or battery is failing?
17$ fixed my problem
Thanks.
Thanks, very helpful
Was it causing the battery to go dead fast when it was bad
No it didn't cause the battery to die. Just failure to turnover
A little confusing when trying to follow your relay numbers so I bought both.
Clarification:
“CRNK”: 2752 -> 0114
“IGN”: 2753 -> 0113
I'm having same issue on my 2010 enclave I do hear an electrical click noise coming from starter area. Can it still be the relay? Please help
1st make sure you battery is charged, if it is then most likely your starter has gone bad
@brettbeez I checked the crank relay and no start. I might be the starter so I'm gonna try and work on it tomorrow... thank u for the advise. Great video
@@braulioresendiz8731 I've replaced the starter on this before, i think a shop costs about $900 to replace. But you can do it with in about 5-7 hours spray PB blaster on the exhaust bolts to help loosen them without stripping
@brettbeez I'm 100% gonna do it myself and I'm confident. Thank u
@brettbeez u think I should go from top? Thru manifold or thru bottom engine mound side?
My 2013 Buick Enclave did this exact thing about a 1 and a half ago. I took it to the dealership and they told me the alternator needed to be replaced they wanted to charge me 1300 to replace my alternator. I said no thanks had my alternator checked elsewhere and they told me alternator was fine. The weird thing is after I had the other shop check my alternator my issue went away. Only now a year and half later I have the same issue again. Gonna try to replace the relays you show here and see if that helps. Also not sure if it’s coincidence or what but when I can’t get it to start turning the key I have better luck using remote start. Might just be coincidence but thought I’d mention it. Once I replace the relay I’ll reply with an update.
Let me know how it works out. When my relays started going out, it only happened once in a while but slowly it happened more and more.
Theres another relay and I cant remember what number but the relay heats up and the car will die. I want to say its 27 not sure. It will die out and wont start again until the relay cools off.
Any fixes yet?
@@brettbeez my wiper fuses keep blowing and my back hatch won't open could it be electrical
@@imogenebuchanan9975did you put the right Amp fuse in? if your fuse keeps blowing with the right amp you might have a bad ground some where. The BCM is behind the glovebox on the passenger side you could remove the glovebox and panel that covers it and tighten it down.
Motor Turn Good Getting Fuel Sit A Few Hours And It StArt
How much was it
I'm having this exact issue but today it cranked and would not start???
Hmmm could be this relay, could be bad fuel pump. Turn your power on but don't crank them listen to hear the fuel pump run. (it'll make a humming/vibrating sound) if you can't hear it, that might be the problem. But the cheap and easy step could be replace this relay.
Question b4 you replace the part when driving would ur battery gauge start to lowering?
No, we would just go out and the car wouldn't crank at all at random times. Our battery never lost voltage. You might have a bad alternator or battery.
Thank you cause mine is doing everything you said was going on with ur buick, it won't turn on sometimes but if I wait a bit it cranks right up but the battery gauge does lower a bit when it's idling when driving its at normal where the gauge should be. Thank you for replying
@@dallastx4443 does it ever slow crank? Or does your lights dim when driving? u can still try this replacement, as it's cheaper than both an alternator and battery.
It doesn't slow crank but the lights inside do dim for a bit but after awhile they bright up again
@dallastx4443 hey did you try the relays, and did they fix the issue? if not did you find a fix? Thanks
have a 08 buick enclave and when i jump it it will run good all day but when i turn it off sometimes it will start and sometimes it wont the altenator is good and so is the battery so what could be the issue when i turn the key over it has power but when i try to start it there is no power
Either one of the relays that i mention in the video or your starter is bad
@@brettbeez starter is good just started having these issues about a week ago
@@stonerganggaming have you replaced either of these relays i mentioned in the video?
I'm having the same problem but I wait a few minutes and it starts up I will try a new relationship switch
That's what was happening to ours. Wouldn't crank at all then it would.
2011 buick enclave, I was driving and all of a sudden couldn't accelerate, couldn't turn the wheel, was able to turn it just enough to get into the median and call a tow truck to tow me home. When I try to crank it all the lights turn off like yours did in the video. Tried jumping it off, no success, it doesn't make any noise at all when I try to start it. Could this be the same thing? When everything stopped working when I was driving, the stabilitrak light came on and said it's off, now it says low fuel level, even though I put in gas before all this happened today. But still won't crank and no noise whatsoever when I try to crank it.
You might have a bad Body control module but try these relays 1st especially the ignition relay (the one I did not replace) . The reason you couldn't turn the wheels is because with the engine dead there's no power steering to assist you turning the wheels. The crank relay would only prevent you from starting it I don't believe it would cause it to shut off in the middle of driving, But the ignition relay could cause that I would assume no signal is being sent to the coils. Stabiltrak most likely came on because of the power failure just warning you. Try changing them both. As it would be about a $35 fix to buy both relays. Go to the dealer to get them.
@@brettbeez I'll add that my power windows still work when the key is in the on switch, but of course, not cranked since it wont crank. I don't know if a bad body module would make the power windows stop working or not. My back hatch will also not open from just pressing the button on the door, I didn't try it with the keyfob or button on the dash.
@@heathalbritton try replacing the ignition relay. But if you have certain accessories not working with the power on I could be the BCM (body control module) what you can do is locate it under the passenger side of the dash where the kick panel is pull that cover down and tighten the bolt that holds it in place. Sometimes after driving for years they become a little loose.
Brett Battan an update. The back hatch opens if the key is in the ignition and turned “on” just as my power windows and everything else works. But if I take the keys out and close the doors, the key fob will not open the back hatch and it won’t work with the button on the back. It will open if the key is turned into the on position.
@ Heath Albritton Hi did you ever find out what was wrong with it mines just did the same thing
I’m having the exact same issue with my 2009 I changed both those relays and it still won’t crank. Everything else works it just won’t crank
You might have a bad starter or check the fuse on your positive battery cable
@@brettbeez thank you I will
My 2008 Buick Enclave would shut off while driving and would start back up occasionally and then got to the point where it wouldn't crank anymore and was dead for a while and I ran into this video and spent $50 replacing those fuses to still NOT being able to crank and AutoZone said "Sorry, can't get your money back on those parts."....I got a friend of mine who is a diagnositc specialist help me and we diagnosed it to be the ECM (Electric Control Module AKA the Computer) He told me to get someone in the car and you stand in the front of the engine bay with the hood open...on the right hand side (drivers side) you will see a metal component with ridges on it and 3 plugs of wires that plug into it that sits on the facing the engine on the front side of the frame close to the drivers side headlight area. He told me to hold a screwdriver and get someone in the car to turn the key like if they are trying to crank the car...he then said to lightly tap the metal fins that component has, and if it turns right on it's the ECM. It cost me $387 through Advanced Auto cause they have to buy it through a dealer so that they can program the new ECM to your Enclave after you give them your VIN Number. Make sure you take off the old one or they will charge you a $70 core charge. I hope this works for you if this is the situation.
Mine is throwing crankshaft fuse ?
What if u hear it a crank but won't turn over
So it cranks but won't start? Does it try to start? If so You might have a bad fuel pump. Or you could replace the ignition relay (that's the one I did NOT replace) which is a faster cheaper fix if that doesn't work you most likely have a bad fuel pump
I bought one and Im going to keep it in the glove box in case this happens to my Enclave!
Not a bad idea!
@@brettbeez happened tonight i go to get my relay GM sent me the wrong part Im pissed
When turning the key do you get a whirring noise?
No noises at all. No clicking or whirling noises. You might have a bad starter
@@brettbeez that's the conclusion I've come to as well. Pain in the rear to get to as well. Guess I know what I'm doing for about 4 hours today. Thanks for your quick response and for sharing your knowledge!
@@tomfoolery5680 no problem! Hope a new starter solves your problem.
i put a new starter and new relays and still nothing ??? batery and alternator is fine also
Your car won't start at all? What about your fuses?
@@brettbeez wont do anything ....all the power comes on though..a friend told me to check the ground
@@falcongro could be a ground could be your PCM. Try tightening the fuse block too. You'll notice a bolt in the center of it
@@brettbeez ok ill try tomorrow ty
Any fixes?
What is that part called?
It's called a relay. Part number is in the video and in the description.
Haha. Add me to the list of relay victims. I knew it was probably a relay. I took it in to the shop today for them to check and told them it was either the starter going bad, a relay, or maybe my alternator going out. I already did a load test on the battery, and it was good. They couldn't locate the problem.
I'm glad this helped out! A lot of places will fail to check relays or even overlook it because they can't duplicate the problem you're having or the car won't fail to start when they're inspecting it. But yes start with there fuses and relays first cheapest parts always the place to start 😂
Fuck! I check the relay with an old one from junkyard and mobile mechanic said starter, replaced that.. then he went mia, another bullshit ass mobile mechanic said the computer was fuct, got one and still the same fuckin problem- ima go get a new starter and ignition relay in the morning and God i hope it works!! Pray for me people!! I need it!! Will update… 🤞
Have same problem with 2011 Buick LaCrosse
ME TOO !!!! 2011 lacrosse ,its been over 3 weeks its been down ,did you have flashing check engine light or problem codes like me po23f and uo100 ?
New starter,new battery same issue
I don't know if relay starter or not
Some mechanic says antenna coil , bad solenoid in starter
I don't know even dealer didn't know issue
Then change the relay. I haven't had any issues since changing mine out. Good luck and let me know what happens
Do you still have the same problem or is it fixed?
@@sc9857 it was battery cable that liked to starter what a bizarre adventure
I switch mines out n still no crank I have a 2011 Buick enclave cxl
Awd
Did you replace just the ignition relay or the crank relay? You might need the other relay. If that doesn't work, it might be the starter.
I have the same problem with 2009 enclave
Hopefully this helps you out. Good luck
My wifes died and wont crank, did this ever kill your engine while driving?
No this is only happens when going to start the car. Did your wife's car have noise before it shut off?
I have this problem right now 😢😢
How much was it?
It was about $13
I'm having the same problem the dealership claims they don't know what it is...
Well try one relay 1st. And then if it persists try the other relay. And good luck. My problem seems to be solved
I changed this relay and still having the issue
Hmmm maybe the other ignition relay then?
Brett Battan I’ll give it a try and let ya know. I seen another video about the wire harness that runs to the ABS module causing the same issue. Hopefully it’s just the relay though
Hey Ryan, did you get it fix? My 2011 Acadia has the same problem.
Yeap
What is wrong with General Motors today
Write your replacement part
Read my description its in there already. Plus its in the video a few times
The battery dead
it doesn't solve the problem as to why the relay went bad in the first place? That is bad because obviously they are not designed to ever do that
Well it should because as i stated in the video GM has updated the relay since then, that's why it has a new part number.
@@brettbeez I appreciate the info but I would be worried that something caused it to fail