Video není dostupné.
Omlouváme se.
Kawasaki VN1500 Meanstreak Oil + Filter Change
Vložit
- čas přidán 15. 01. 2021
- Hey Guys, Doing some work on the meanstreak today i am changing the engine oil + filter
Oil I use:
www.supercheap...
I always recommend going to your local dealer and buying a genuine filter
For someone who hasn't wrenched on motorcycles before your videos are invaluable! Thank you for taking the time to make them 😚
No problems, thanks for watching 👍
First youtube vid that showed a full and correct oil change for a Meanie. Good stuff! Thanks a bunch, didn't know about the left side oil screen, so that's good to know.
Thanks Nathaniel.
For those in the USA, NAPA Gold filters are top notch and highly recommended. Also, fill the filter anyway! Fill it up once and watch how much oil it soaks up. Poof, gone! Depending on filter brand and how dense the element is, you can top off the filter twice and it will have soaked up enough oil to be able to screw it on without any oil dripping out.
Thank you so much for this video, very helpful.
You're the man, get again, for this. I too have a Mean Streak and I need to do an oil change and I'm nervous.
Go for it. It's pretty simple on this machine!
I've got to give it a go. Honestly, I feel that my apprehension is based on unfamiliarity and being afraid of messing it up the first time. We'll see.
Yep it's always nervous doing something for the first time. Do you have a manual for the bike it is sometimes good to see the procedure actually written down also.
I do. What I think I'll do is take it to a local mororcycle garage to have it done and watch them.
Just picked up my Mean Streak yesterday, identical colour to yours. Ordered tyres today and picked up some maintenance goodies, thank you for all your Mean Streak videos, they are going to be a huge help to me! Do you ever miss yours after all this time?
Awesome enjoy the bike, good to get some maintenance done when your first get a bike. Yes from time to time I loved the look and sound of the bike, just wasn't practical for the riding I tend to do. Did a few good trips on it though that we won't forget
Bet you don’t miss the Scottish climate mate 😓 it’s proper pish here
Great video, I just replaced the chain extentioners thanks to your video on that subject. Just curious, what is the aftermarket air filter system you are running? Looks really cool...!
Not sure it was on the bike when i bought it. Looks like a universal pod filter off a car. I since replaced it with a barons big air kit
Thanks to you i made servis on my mean streak 😉
Nice work!
Hey great video I've had my mean streak for two seasons now and I never knew about the oil screen. So thank you so much for letting me know about that. I'm wondering if you changed that o ring and if so what's the part number cause I want to change it when I do my next oil change
Hey Giovanni, Thanks for watching. I never changed the o-ring so not sure on part number
Hey Dans, I live in Mexico and thanks to your video, I did my first oil change in my meanstreak., I only have one question, what kind of liquid did you use to clean the little filter with the spring on?,,,,thanks mate.
Hey Raul, glad I could help. I just used brake cleaner how ever kerosene or similar would do the same job for cleaning that.
Use brake cleaner
Can you do a video for coolant Change please.
Have one recorded just need to make it into a video 👍
@@MOTODANS Thank you. You're videos are brilliant, keep up the good work.
Hey moto dans. Have a question. I can't get my oil cap off to put oil in. Any ideas???
A big coin would be the best. Depending where you live should get one that is a tight fit in the hole. If you can't get it out with that try putting an adjustable spanner on the coin for more leverage. If it's still tight give it a light heat with a hair dryer or similar. On refitting put a bit of grease on the rubber seal.
@@MOTODANS well I went to get large washers and maybe a wrench will work. I live in Texas. I did the large screwdriver no go. Hope this idea works. Will report back sir. Oh yeah got a 2002 mean steak
Washers should work, just try and get it tight as you can in the slot. If using washers you could even stick a screwdriver through the hole for leverage
It worked got it off
Please show your exhaust modification
Stock exhaust has just had the cat cut off. Looks like it has just been cut flush with the pipes then a plate welded to cover the hole. Was done before I got the bike.
Have you ever done the front suspension seals? I'm looking to do that on my own but have never done so.
Not yet, but one of mine started leaking on the bike last trip so will be doing them in the next few months 👍
Changed oil, filter, screen etc. Rode about 50 miles and the oil light came on, sinking feeling, went off when on the closed throttle with engine brake. Managed to get home, another 50 miles of sheer hell. Put a remote oil gauge where the pressure switch is and still nothing. Removed the gauge, with hose still attached a large glug of air came out. Turns out it was an airlock between the filter and pressure switch. All is still well, thank fook. Love my Meanie. Like your vids. Here's a vid when finished, Phew! czcams.com/video/MGrT-n-saKc/video.html
That is very strange. If it was something you did it would have come on straight away rather than 50 miles later. Glad you got it sorted!
@@MOTODANS Happens sometimes on cars, never had it on a bike before. Spent most of my working life in the bike/car trade. But if an airlock occures try bleeding from the pressure switch. You've some good roads and weather out there. I'm back in the UK after living in the wide spaces of SA. UK sux. by the way have a '06 Meany 10k on the clock. Great bikes just not for London roads.....LOL!