17 DIY ELECTRONIC inventions YOU can create for home
Vložit
- čas přidán 14. 01. 2021
- Timestamps:
0:08 Tea cooler
1:16 DIY lamp
2:25 Portable charge
3:30 DIY conditioner
4:06 Water purity meter
5:05 Building lighter
5:32 Toilet lighter
This video is made for entertainment purposes. We do not make any warranties about the completeness, safety and reliability. Any action you take upon the information on this video is strictly at your own risk, and we will not be liable for any damages or losses. It is the viewer's responsibility to use judgment, care and precautions if one plans to replicate.
The following video might feature activity performed by our actors within controlled environment- please use judgment, care, and precaution if you plan to replicate.
All product and company names shown in the video are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
----------------------------------------------------------------------------------------
Our Social Media:
Facebook: / 5minute.crafts.men
Instagram: / 5.min.crafts
Twitter: / 5m_crafts
5-Minute Crafts PLAY: goo.gl/PEuLVt
The Bright Side of CZcams: goo.gl/rQTJZz
----------------------------------------------------------------------------------------
For more videos and articles visit: www.brightside.me/
Music by Epidemic Sound: www.epidemicsound.com/ - Jak na to + styl
The water dirtiness meter is not a direct measure of dirty-ness, it is just a measure of salinity, if you had clean water and you put a ton of salt in it, then it would measure very high, but if you had water without a high salt content, but with a lot of germs and bacteria in it, it could not measure it, you would need an industry grade ATP meter, so please DONT rely on this to tell you if water is good or not as this might pickup metals and salts in water but not harmful bacteria.
ikfr
The copper tape and snail one was genuinely pure genius.
just electrocute them right
czcams.com/video/4-6Ff4GBHow/video.html
It was stolen from diy perks
6:58 if the door is locked and battery power is low 🤣
Lol
czcams.com/video/4-6Ff4GBHow/video.html
while the remote-operated door opener might work, I would advise you to use a method of securing the bolt in place on the opposite end of the motor, and probably get rid of the bolt altogether because it will wear down quite easily, use a worm gear connected to a small gear on the lock instead, they are designed for such applications
I want to speak with you? Can you send your email or numbers? Or Instagram
for the servo motor thing, you will easily wear out the servo motors gears and/or motor as it was not designed to be used as an electrical generator
Do you know the materials used in there? Can you state them for me, I'm working on a science project similar to this. It'll be much appreciated.
@@inggogauran7921 Just look at the product description/instructions
It also damage your phone battery by charging inconsistent
Will that experiment will work
Which sensor did you use for rapid cooling system?
*DO NOT ATTEMPT THE DIY SOLDERING IRON:*
One of two bad things could happen:
1. the graphite on the pencil could become hot enough to light the wood part of the pencil on fire
2. the 9v battery could overheat and blow up due to you essentially shorting the battery
and also I don't think a single 9v battery could have enough sustained amperage to heat up a piece of graphite
1:50 looks like 5 minutes have been watching me🧐
Bro I am your subscribeer 🙏🙏
Yeah
Yesss😅😄
@@InventR_ 😁😃
I subscribed to both
Any tamilan 🤚🤚🤚
nhi
I am
Yeah
Vanakkam
Yeah
Some of these projects can be [somewhat] dangerous and other will not produce the expected result unless you want to invest more time in testing and design.
At the end of the day I praise these people coming up with interesting ideas and sharing it to the world.
*All ideas are awesome* 👍👍👍👍
Guys welcome to my Inventive channel
Never Open your electronics without being sure about your skills!!
Motion sensor led on toilet was pretty cool 😂
2:25 is genius !!!! cant tell u how many times ive been out riding my bike and needed power for my phone....
Not genius, this method will barely charge your phone at all and in order to get any realistic charge you would need to bike for literal hours at a high speed nonstop. It's simply cheaper and cleaner for the environment to buy powerbank or otherwise a rechargeable charger on the go/backup battery,etc.
As this device is going to lead to e-waste.
Get this guy some proper soldering skills
Honey, Hide the hot glue gun!
czcams.com/video/4-6Ff4GBHow/video.html
Lmao
and for the fan, PLEASE MAKE SURE IT IS UNPLUGGED IDK WHY THEY DIDNT PUT THAT IN THERE but some people might not remember to unplug it and shock themselves on the fan motor due to it being a motor that is connected to the power that comes out of your wall
You'd have to be pretty dumb and deserving of a good belt if you left it unplugged. Them people need a lesson.
?
Please Give us Link of Power Bank Chip
im in shock that the remote controller car broke like that
Holy shit... laser level ????? HA!!! That is epic to use for all sorts of stuff..... as a painting muralist... i cant tell u how many times ive required a device like that....
Don't mind but i think you can improve your soldring skills
Probably the worse soldering technique I have ever seen
@@kennmossman8701 Well what's you expect? A Tack Weld machine hook up to some soldering reactants and shiz?
These aren't hooking up LV, MV and HV circuits to a house or something just your typical 3.3V-5V running at few amps or so.
@@rickytorres9089 LMAO if you only knew how idiotic you sound
@@kennmossman8701 trust me, not the worst. The conections work.
@@designsbyphilip510 faint praise indeed. do they indeed work? there is no heat damage? the connections are reliable and robust? there are no cold solder joints? really? Wiping your butt with leaves also works but is hardly desirable.
naturally everyone has a soldering iron.
I thought that I might be able to learn something new in electronics but was I ever wrong about this self aggrandizing video. 😞
Awesome👏👏
Plz spoort my channel plz #WIKNOTEC
Ja het is Awesome
@@wendyvanaar2565 pls spoort my channel plz
Before connecting the wire to the power bank, the phone started charging. Really cool😀
czcams.com/video/4-6Ff4GBHow/video.html
nice
Thanks for the ideas! I hope you can try using our silicone wires in your next tutorial videos 🤩
Nice
সুন্দর হইছে
I watch all these 10 times please make new ones.
Saya dari indonesia 😇
So beautiful idea nice sharing 👍👍👍❤❤
czcams.com/video/4-6Ff4GBHow/video.html
yes i am finally first
No
And me 777 😂✌🏻
@@ztry9770.official i was first
Plz spoort my channel plz #WIKNOTEC
It's awesome 😘
Plz spoort my channel plz #WIKNOTEC
You do know the Hamster is going to form a Union and demand more Peanut Butter. I've seen it happen. ;-)
We all have that but we cant do 😂
which type of motor used in charging when cycling.....
That laser is going to blind someone and FFS buy some GD 9v battery clips SMH...
Is the sensor on the first project an IR Temperature sensor? Trying to understand its purpose. If it is or even if it isn't can you link the product?
czcams.com/video/4-6Ff4GBHow/video.html
czcams.com/video/4-6Ff4GBHow/video.html
Tea fan should blow away from the mug. Thermodynamics 101
praise our LORD 🩸 thank you for being our savior jesus Christ ❤
All videos are great
What kind is micro board used in water purity meter
7:38 It's very badd
They copied it from DIY Perks
in the first projects how did the led turn off?
Have you gotten an answer to this question?
The slug one Is cruel
Doyok 👍
What is the module to make a tea cooler ?
Have you found an answer yet?
@@abdulrahmandisu5802 czcams.com/video/4-6Ff4GBHow/video.htmlczcams.com/video/4-6Ff4GBHow/video.html
0:32 PLEASE use a clip for attaching wire to a battery. 1:35 in a prison a clip would be unnecsassary expensive. It is a prison design with easy affordable parts for imprisoned, but it needs another finished one then.
for sure soldering wire directly to a battery can be dangerous and then what to do when you need to replace the battery.
@@kennmossman8701 I am sure it's no more dangerous than completing a circuit. I even had to do it on a brand new APC UPS unit. Where you connect the positive (red) to neutral/ground (black).
Just keep your hands always decently on the insulators and provided you completed the circuit completely sparks shouldn't generates.
Good video
Ahhhhh of course I have all of this just lying around.
czcams.com/video/4-6Ff4GBHow/video.html
That door lock was awesome
Plz spoort my channel plz #WIKNOTEC
@@wiknotec423 we subscribe if u give your best
@@hiresh188 ok
@@hiresh188 I am new creator
I make for amazing ideas and crazy diy ideas I am born for creative ideas
Good 5menit 👍
supiri ayya
This video is very useful
Why are we killing snails lol
Muy bueno
12:07 mmm yes manual hamster labour
Water sensor: yeah this water is good
The river water: *full of bacterias*
i feel sorry for the snail tho :(
Beautifull sharing
Wow so cool 😳 😎
Awesome 👍👍👍👍👍👍👍👍 bro
Plz spoort my channel plz #WIKNOTEC
Don't use continuous video show component name, capacity & range.......Thanks
#letsmake_iteasy
Superb ideas
Maybe a crash course proper soldering ;-)
good work
4:57 NO! it's not safe to drink!
most of these things will break your stuff and waste money, the make these thing because they know nobody has the right stuff to do such things. but the toilet sensor is a nice idea
Love this
czcams.com/video/4-6Ff4GBHow/video.html
I could not find any of thesse things in my house anywhere
Too good
super
Plz spoort my channel plz #WIKNOTEC
LoVe iT Thanks!
I’d rather watch my trust worthy indian from across the world
verry usefull sir,
the soldering iron dint work for me
awesome
Burned fan Craft has watched more than 10 times😂
No
czcams.com/video/4-6Ff4GBHow/video.html
Good
Nice hacks
Awesome
How clean nail
7:14 thats croule wat if all the food was gone and the only food is proteted by an eletric fence
First
Plz spoort my channel plz #WIKNOTEC
I bet everyone one of you wondered how bad it is not being able to take a shit without rgb backlight 6:16
I really like this is neat 🎊🎉🎊✨🌟✨✨✨
czcams.com/video/4-6Ff4GBHow/video.html
czcams.com/video/4-6Ff4GBHow/video.html
Wow kak
ehren los
Which sensor did you use for the tea cooler.
what sensor in the "Tea cooler" can you please tell me.
Wow
um nononono lmao - That does not mean the water is safe my man 5:00
whats the brown stuff that looks like soy sauce when you solder the ciecuits?
Cuidese al caracol
they are not using their own soldering iron
I liked your channel
,is it really important for a toilet bowl to have RGB lights?.,
2:43 which board is used
❤️❤️❤️❤️❤️❤️
Please use a diode for the charging circuit it has polarity ang your generator can be run on reverse hehe