How To Install An Illuminated Bowtie On Your Camaro: Step-By-Step Guide!
Vložit
- čas přidán 24. 07. 2024
- Welcome Back! In this comprehensive guide, I walk you through step by step on how to install the Overtake Auto illuminated bowtie on your Camaro. Watch as I transform the front of the vehicle with this eye-catching modification, adding a touch of style and flair to the ride. Follow along closely as I provide detailed instructions and handy tips to help you successfully complete this installation process. Illuminate the streets with your Camaro and stand out from the crowd!
This bowtie is compatible with 2016-2024 models and trim levels. On 2019+ models, the wires will need to be swapped for it to work. That section timestamp can be found below. If adding to a 2019 Camaro, since the bowtie location is different, you will need to get a stock bowtie bracket to mount this to as well as a way to remove the current flowtie.
If you like the way this product looks, be sure to check it out on their website with my referral link found here⬇️
overtakeauto.com/JCS-CUSTOMS
CHAPTERS OF INSTALL
Intro 0:00
Unboxing 00:46
Start of Install 02:12
Stock Bowtie Bracket Removal 05:22
Removing Mount from Stock Bowtie 06:26
Drilling Hole in Old Mount 07:22
Start of Accessing SideMarkers 08:43
Running Glowtie Cable through Engine Bay 10:03
Swapping Wires for 2019+ Models 12:15
Results with Videos and Pictures 14:21
Outro and Thoughts 14:52
I enjoy making these tutorials for you! It would be super helpful and awesome if you guys would smash that subscribe button at this link:
/ @jcscustoms
#camaroilluminatedbowtieinstall #camaroglowtieinstall #camaro #chevroletcamaro #chevycamaro - Auta a dopravní prostředky
Hey CZcams, if you end up liking the way this product looks and want to get one, use my referral link found here: overtakeauto.com/JCS-CUSTOMS
Love the videos Bro. Keep ‘em coming!
Thanks man, will do!
Awesome video, thanks for the sharing!
Glad you liked it, thank you for watching!
Thanks i found it after i asked.. Appreciate the reply
Another great video! Thanks for showcasing our emblem.
Thank you for the opportunity!
Love ur videos bro only guy I’ll watch installs on
Thanks man, means a lot!
Thanks, JCS Customs, for a step by step video on the lighted bow tie. I'll be installing it tomorrow and a ram air duct on my 2017 SS
Nice! You’re welcome
GREAT Video Jason: Thank you for this. I am wanting to do this MOD on my 2023 1SS but will be using the GM Black Bowtie.
Thanks! You’re welcome! Consider this product, it is great quality!
I have 2023 Camaro with standard LT1 headlights. Is there anyway to make the white runnings light stay Amber all the time. Like the color they change to when they blinking for lane changes.
Got a question, I'm replacement my alternator, but was told to check my alternator fuse or relay, I can't find them can u Tell me where, for a 2016 camaro ss
Hi JC Thank you for this VIDEO so much! I took my 2024 CAMARO 1SS into the DEALERSHIP to Instal the Illumanated BOW TIE and at first the Technician wanted to REMOVE my Front Bumper until I showed him out Video!
But know my HOOD is raised up on the Left Side and the Gap is wider on the Left Side more than the Right?
Nice! Glad I could help. Your hood is out of line, it’s easy to get out of line once you remove the front header plate. But it’s also easy to adjust back. The two rubber grommets can twist to lower or raise each side and the two screws in the middle can be loosened or tightened to raise the front of the hood. Also, if the latching mechanism for your hood wasn’t placed exactly where it was before removal, it will be out of line. I also went over this in the video if you need video reference👍🏻
Hey i m looking for that support bowtie u know where i can get one or what's the #part?
I have a bumper aftermaker and i dont have that :(
Camaro not keeping charge did replacement battery but the old one and the new got kill do to no charge, got the system charge message
According to the directions from the factory you are not supposed to connect it to the side marker lamp, the directions show it connected to the DRL, I am thinking of installing this on a 2019 Camaro LT all it has is the side marker lights, my question is, if you can reverse the wires at the end you plug into the lightup bowtie? Instead of cutting the other end at the side marker light. So that you are only cutting two wires instead of four? I saw a video where a guy only cut the end at the bowtie and only cut the 2 wires and reversed them? Would this work? I have tried contacting the dealership to install this but they want like $400 to install this. I feel that is way too much. Do you have any advice? Also I just realized you are using an aftermarket kit, do you know if this will be the same with the OEM Illuminated BowTie Kit? Thank you
How you do the 2019 bow tie
Bro what is the factory color of your camaro?
Would that fit a 2014 rs
This model would not
Hi, very nice bow tie for your car. How much does the bow cost? Thank you👍
There is a link in the description that will bring you to it, it is currently priced at $119.00
Thanks you 👍
can you add this to a 2015 camaro
Not this model
Whats the link for it?
overtakeauto.com/JCS-CUSTOMS
Just the battery light
Great install video. I have that same lighted bowtie, and I hate it because it's a different color than the headlights.
I just went ahead and spent the extra dough on the GM one, and it looks way better. 🤟😎
No engine code