3 point hitch pallet forks MOD! B2601
Vložit
- čas přidán 11. 02. 2021
- This video is about making my pallet forks connect to the 3 point hitch of my b2601. Thanks for watching. #tarriverimplements #b2601 #kubota
Check out Mowers Family Farm
/ @mowersfamilyfarm
This video is for entertainment purposes only.
DISCLAIMER:
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
By using some of the affiliate links above, I may receive a small commission, at no extra cost to you. This is the easiest way to support me and helps me continue making content like this for you. Thank you 🙏
Due to factors out of my control, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not me. Be safe! - Zábava
Thanks for watching! Please help out the channel by hitting the subscribe button and giving the video a thumbs up!
@Jeremiah Allen let me know how it works for you thanks for watching 😁👍
"Don't you dream about this sort of stuff?"
You know it brother, good work on this.
Thanks 😁 I have been dreaming about spring lately😂 seems like it is winter 🥶 still up here in Minnesota😂 I can’t wait to do more tractor stuff. Thanks for checking out the video😁👍🚜💨🍳
Add multiple holes to where the top link attaches, it changes the geometry of tilt angle as it lifts. When the top link is parallel to the lift arm the forks will remain level through the lift range. Use a different hole placement and forks will curl in when raised, great for transporting heavy logs.
Thanks for telling me about the multiple holes. I will try it out and thank you for checking out the video ☀️😁👍
I have been looking for a week where I could buy something like this. Then I saw your video. Great work.
Sorry to get back ti you so late just found your comment. 😁 Thanks for checking out he video😁👍🚜💨☀️
@@MJADoingStuff How much weight do you estimate it can lift without making the front wheels too light?
@@Sparky-fy1zs about 7-8 hundred pounds with empty loader bucket. But the 3 point can lift 1800 pounds so it just wants to lift the front wheels😁👍🚜💨🍳
Outstanding! The skid steer front adapter allows for a variety of gadgets to be attached to the bucket lift. Excellent!
Thanks 😁 the pallet forks are my favorite attachment. I have done all kinds of modifications to them. Thanks for checking out the video😁👍🚜💨🍳
Hello Mitch,
Great idea. I am like you, I lie awake at night thinking of more ways I can use my B2601. I have been teaching myself how to weld, so this will be a great project for me. Welded the chain hooks on the bucket yesterday, and am working on fabricating an eye for inside the bucket as soon as the freezing rain stops.
Thanks,
Ben from Nova Scotia
I got a lot more ideas💡 coming. If you haven’t, check out my tractor Mods video lots of projects there. Thanks for the sub and thanks for watching.
really like your way of thinking for multiple use and purpose
Thanks for watching I just can’t leave any thing stock always upgrading something👍😁
Great idea, great execution.
Thanks 👍 I just put out a new video I made a Log 🪵 grapple for the B2601. Thanks for checking out our video😁👍🚜💨💡
Sweet idea and execution!
Thanks 👍 Been working on something New just put out another master piece 😂 thanks for watching 😁👍🚜💨💡
Great job M, I wish I had welding skills like you 👍🏻😉
Thanks it’s not hard to mig the machine does it for you 👍. You should try it. Thanks for watching.
Nice welds!
Thanks 😁not the best but gets the job done. Thanks for watching 😁👍🚜💨☀️
Very nice mod.!
I just got my new B2601 today and can't wait to start playing, I mean working with it.... Looking forward to doing mods on it as well. I've got a set of pallet forks similar to yours except mine has the big override bars on the top of it. I'm thinking about cutting that off and welding tabs on the side of it so I could bolt the override rack back on if I thought I would need it.
Great channel, and yes I subbed.....
Good idea on welding the tabs on in case you need the rack plus with it off it saves weight for more lifting maybe add some hooks to it too. I showed my pallet fork hooks in the tractor mod video. Thanks for checking out the video : ) and congrats on your new tool toy.
Great idea. Gonna do the same with mine
Sweet! Thanks for watching and leaving a comment 👍
WOW, great idea and awesome execution! Thanks for the vid! Now you should make a ballast box that can be on either the loader or 3 point as well!
Thanks👍 that’s a great idea. I run into the problem of not having enough ballast on the front check out our watering trees with a IBC tote to see what happened when I put to much water in it😂thanks for leaving a comment😁👍🚜💨💡
The front comes with a nice ballast box on the front straight from the factory :) Just scoop up something to fill the bucket and you're good to go.
love this idea. I need to use my front forks unloading pallets from trucks, etc., but it'd be great to have the forks on the back to haul logs and milled planks out of the woods. The terrain has some sizeable hills and it's a bit clenchy to have the weight out in front when going down them.
Very true on hills it lowers your center of gravity. I use them a lot on the 3 point. Thanks for checking out the video.Have a great weekend 😁👍🚜💨🍳
Nice job on the mod!
Thanks I think it will come in handy 😁👍
Thanks I see that as being a great idea. I might do a couple minor changes for a little larger tractor.
Thanks 👍 that is the fun part of fabrication. Always room for improvement. Thanks for checking out the video.😁👍🚜💨🍳
Nice work
Thanks 👍It gets the job done 😁👍🚜💨🍳
Nice work! You would think that the manufacturers would make them that way , but I’ve never seen them. Great video thank you for sharing this .
Cut cost anyway they can. But that is ok makes good content ☀️😁👍
nice job.
Thanks I use the heck out of it all the time. 😁👍
Thanks for the shoutout! Great job on customizing for the 3 point linkage! Unique idea, any more custom ideas in the pipeline? :)
Yep I have all kinds of ideas 💡
nice job
Thank you it was a useful and fun project ☀️😁👍
Wow, Mitch, that is a great idea, and nicely executed! You're going to need a bigger tractor to lift your full IBC tote, But you don't have to fill it all the way with water. Cheers!
That’s true thanks for watching 🥶👍
Ok just did the math. 2282 pounds. your right maybe I will just fill it up half way to be safe. Thank for reminding me to check.
@@MJADoingStuff I am going to be doing some watering from a IBC tote this summer too. I am going to try to collect rainwater.
@@peacefieldfarm_mn That sounds like a good idea 💡
Thinking about doing this to move gigantic pumpkins that I'm growing on pallets...I knew I'd find How 2s on CZcams
It works pretty good 👍 just make sure you get a full bucket of dirt for ballast because it will lift the front end off the ground. Thanks for checking out the video 😁👍🚜💨🍳
Another great video to inspire my own pallet fork mod..:) with every video you post it seems my “to do” list gets longer..thanks for the great content dude. What brand is the pallet fork bracket you have?
Thanks Man😁👍I appreciate you leaving a Sunny Side☀️ 😎 comment. The pallet forks are Tar River brand. I wish I could share my whole to do list at one time but that would be a long video. Thanks for checking out the video. Have a great weekend 😁👍🚜💨🍳
I was thinking of doing this too.. Thanks for showing how it's done.. Have you seen if anyone just makes one for this purpose?
The only ones I have seen are not real pallet forks but I haven’t looked in awhile 😁 thanks for checking out the video 😁👍🚜💨💡
Water is approximately 8 pounds to the gallon, so 250 gallons weigh in at 2,000 pounds.
Looks like I won’t be picking that up😂👍
Nice - could round this out with a hydraulic top link!
That would make it perfect 👌 got that summit hydraulic 4 four rear remote manifold on my wish list😁👍🍻 thanks for checking it out.
Now build a 'carry all' out of pallets.
I do need a carry all but it might be made out of a IBC tote haven’t decided but you have a good idea thanks for your comment and watching the video ☀️😁👍and thank you for subscribing 😁
1 gallon of water weighs 8.3 lbs. So 200lbs. =1660lbs, but don't forget to use a counter weight up front.
Thanks for the information👍 and your right about front ballast it lifted the front end of the ground before I could filled up the tank 😁👍
275-gallons weighs 2290-lbs, or 1039-kg.
Yep I was wrong I can’t pick that up 😂thanks for checking out the video😁👍🚜💨🍳
@@MJADoingStuff Water weighs 8.33lbs/gallon. And if your going to use the tote, be sure to keep it low and throw in sone of the expanded open cell foam, used to fill fuel tanks so they don’t slosh. If you hit a bump with 100-gallons on board and it runs from one side to the other the shift in center of gravity, can be enough to flip you over onto your side.
One of those industrial accidents which is pretty common with unbaffled tanks on trucks. I have a late 90s big Bronco with the optional 60-gallon fuel tank. When it gets to between 2/3 and 1/3 of the tank you can feel the fuel moving around, and have to think about it if out creeping along old roads. And, in town you can feel it every time you brake.
a book rack
Yep 😁👍on the list. Plus it already has wholes on the side. Thanks for checking out the video 😁👍🚜💨🍳