I did all this on my Equinox 2018 and works very well, it took me one day to take it off the seatbelts and console, and send it to you and for 300$ i repair the SRS system, in the dealer they wanted to charge me 2250$ for the same job! thank you so much handsome bro!
Hi Eli: I have a plain 2017 Elantra with phone call buttons and volume rocker left on the helm. To the right of the helm only have the Trip button and the Reset button Trip . If I want to change the helm to the Elantra Turbo version that has other additional buttons like cruise button, what would I need to make these changes? Greettings from Panama City 🇵🇦
Frank Baker, Thank you for the question. The removal process will be pretty much the same. The only difference is you will have more electric wires / plugs to unplug from beneath the console.
Hi, i have a question, my airbag light will come on after driving the car for almost 30 minutes and it goes away only when i restart the car then it will come again, Elantra 2021.
I have a 2004 Hyundai Elantra and it was in a minor accident but the Airbag and Seatbelt pre tensioner deployed. I have replaced both the Seatbelt and the Airbag but the Air Bag light on the dash remains on. When tested it is showing, "Airbag open circuit". Do I need to replace the Module to eliminate the problem? I am in Australia and as much as I would like to send the module to you guys, if needed, to repair and or reset this is not an option for obvious reasons.
Chris - Lena Cahill, You're on the right track! Now with term "Airbag open circuit" that just means theres still a bad part or connection issue at one of the components. The question is where? When you got it tested, did the scanner / scan tool give you a certain code #?
Hi there. I have an elantra 2012 and the airbag light is on, the dealership scanned it and showed three different codes. B2500, B1493, B1481. Is it to bad?
Leandro Garcia, 1 - code B2500 = Inflatable restraint system indicator circuit -The first step is check the fuse for this system which is listed as Fuse 3 , if that is good the next step would be to inspect the light bulb for the air bag warning light and replace the bulb if necessary. 2 - code B1493 = PODS (Passenger Occupant Detecting System) Communication error -SRSCM receives passenger occupant detection signal which includes passenger weight class from WCS. SRSCM controls Telltail lamp and passenger airbag whether deploy it or not according to passenger weight class. SRSCM periodically receives passenger occupant information. If SRSCM receives communication error or Fault information, SRSCM turns on Airbag warning light and sets DTC. 3 - code B1481 = 2nd Stage Driver Airbag Resistance Too High Read -Possible causes: a - Faulty Driver Airbag b - Driver Airbag harness is open or shorted c - Driver Airbag circuit poor electrical connection d - Faulty Clockspring e - Faulty Supplemental Restraints System Control Module (SRSCM) The reset we provide is more "after-accident" modules where module just needs to be cleared of codes. If you were to send in your module, we would be able to clear of it all codes, but, because these are active issues in other parts of the airbag system, these codes would just come back. They will only clear out once you have corrected all 3 trouble codes / components.
@@MyAirbags thank you so much for reply my questions. I think it's just electrical thing, because when I'm driving sometimes it turns off and then comes on a few second later. Where is located the fuse 3? Thank you
have 2013 elantra and the airbag light is on but the car never got in an accident. A guy ran a diagnostics and he said that there is pressure on the sensor
@abo taahir It looks like he may have ran diagnostics on a different system in the car. You will need to get the airbag system scanned by a scan tool that plugs right into the OBD port. (OBD plug in is located below the steering wheel) When you get the car scanned for airbag codes, you are welcome to reply here and let me know what code you are getting?
The easiest place to check is at the seat belt pretensioner itself to see if it good or bad. Good seat belt would give you a reading between 2 - 3 OHMs
Hi My Air Bags, ... well, I have a 2011 Hyundai Elantra GLS. My airbag indicator on the dash turned on occasionally and sometimes went off by itself. But not it turns on and stays on and does not go off. I have not been in an accident. It has been bothering me a lot these days. Any idea what it could be?
Hi Aaron, The first step is to diagnose the airbag light. Hook up the scan tool / scanner to the car and read the airbag codes. You connect the scan tool right into the OBD port/plug. Its usually located below the steering wheel, on the left.
Hello, I have an elantra 2014 , the airbag light goes on and off mostly when i move the steering wheel too much right and left... what could be the cause? Thank you
Hi! Thanks for commenting! It sounds like it could be a bad connection in the driver steering wheel airbag. There a lot going on behind the airbag. Most likely the clockspring it self or the clockspring plug going from the clockspring to the airbag. This is just a guess. Best way to find out for sure is to wait until the light comes on, during this time have the airbag system scanned with a scan tool. The scanner will read out the code that will allow you to know exactly where the problem is. When you end up finding out what the issue was, would you please reply back to us here? I'm sure theres plenty of other people with the same issue that could use your input.
@@MyAirbags I checked the wires under the driver and passenger seats, all good... i am suspecting problem in the clockspring ... thinking to change it...
Heres some helpful instructions from our MyAirbags.com Help Center: help.myairbags.com/hc/en-us/articles/360001388368-MyAirbags-How-to-Replace-Your-Vehicle-s-Clockspring
Justin, the 2003 model will probably be pretty different as far removal steps but the actual should location should be about same. Its under the center console on the floor, or under the radio console, on the floor. Please share with your findings with us! Thanks
Bryan, Code B1748 for HYUNDAI is: Pressure-Side Impact Sensor Front Passenger Communication Error. Possible Causes: Faulty Pressure-Side Impact Sensor Pressure-Side Impact Sensor harness is open or shorted Pressure-Side Impact Sensor circuit poor electrical connection
My Airbags How can i fix that? the airbag warning light in the dash does not go out and the one next to the clock does not, I need to fix it to take the car to inspection, I just bought it
Theres an issue with that impact sensor. Its either not connected properly or needs to be replaced. Once the system no longer detects a problem with that impact sensor, the light will turn off.
Where is the Location of that sensor? I changed the clock spring because the buttons in the steering wheel did not work. They are working now, but the light is on
one more thing to add to the question below, I think it might be the passenger airbag problem because the passenger bag indicator also sometimes flashed and stayed on and sometimes never turned on.
Hi Aaron, The first step is to diagnose the airbag light. Hook up the scan tool / scanner to the car and read the airbag codes. You connect the scan tool right into the OBD port/plug. Its usually located below the steering wheel, on the left.
Thank you very much for the information which give us I do the same stips on my elantra 2020 .
With my regards ❤
Thanks from my heart ❤️
Mohammed, Thank you
I did all this on my Equinox 2018 and works very well, it took me one day to take it off the seatbelts and console, and send it to you and for 300$ i repair the SRS system, in the dealer they wanted to charge me 2250$ for the same job! thank you so much handsome bro!
Neil, Thank you for sharing! Very glad it helped!
Thank you for this beautiful explanation
You are very welcome
Very informative
Sel Arul, Thank you
Great!
Hi Eli: I have a plain 2017 Elantra with phone call buttons and volume rocker left on the helm. To the right of the helm only have the Trip button and the Reset button Trip . If I want to change the helm to the Elantra Turbo version that has other additional buttons like cruise button, what would I need to make these changes? Greettings from Panama City 🇵🇦
Frank Baker,
Thank you for the question. The removal process will be pretty much the same. The only difference is you will have more electric wires / plugs to unplug from beneath the console.
Thanks
Welcome
Hi, i have a question, my airbag light will come on after driving the car for almost 30 minutes and it goes away only when i restart the car then it will come again, Elantra 2021.
I have a 2004 Hyundai Elantra and it was in a minor accident but the Airbag and Seatbelt pre tensioner deployed. I have replaced both the Seatbelt and the Airbag but the Air Bag light on the dash remains on. When tested it is showing, "Airbag open circuit". Do I need to replace the Module to eliminate the problem? I am in Australia and as much as I would like to send the module to you guys, if needed, to repair and or reset this is not an option for obvious reasons.
Chris - Lena Cahill, You're on the right track! Now with term "Airbag open circuit" that just means theres still a bad part or connection issue at one of the components. The question is where? When you got it tested, did the scanner / scan tool give you a certain code #?
Hi there. I have an elantra 2012 and the airbag light is on, the dealership scanned it and showed three different codes. B2500, B1493, B1481. Is it to bad?
Leandro Garcia,
1 - code B2500 = Inflatable restraint system indicator circuit
-The first step is check the fuse for this system which is listed as Fuse 3 , if that is good the next step would be to inspect the light bulb for the air bag warning light and replace the bulb if necessary.
2 - code B1493 = PODS (Passenger Occupant Detecting System) Communication error
-SRSCM receives passenger occupant detection signal which includes passenger weight class from WCS. SRSCM controls Telltail lamp and passenger airbag whether deploy it or not according to passenger weight class. SRSCM periodically receives passenger occupant information. If SRSCM receives communication error or Fault information, SRSCM turns on Airbag warning light and sets DTC.
3 - code B1481 = 2nd Stage Driver Airbag Resistance Too High Read
-Possible causes:
a - Faulty Driver Airbag
b - Driver Airbag harness is open or shorted
c - Driver Airbag circuit poor electrical connection
d - Faulty Clockspring
e - Faulty Supplemental Restraints System Control Module (SRSCM)
The reset we provide is more "after-accident" modules where module just needs to be cleared of codes. If you were to send in your module, we would be able to clear of it all codes, but, because these are active issues in other parts of the airbag system, these codes would just come back. They will only clear out once you have corrected all 3 trouble codes / components.
@@MyAirbags thank you so much for reply my questions. I think it's just electrical thing, because when I'm driving sometimes it turns off and then comes on a few second later. Where is located the fuse 3? Thank you
have 2013 elantra and the airbag light is on but the car never got in an accident. A guy ran a diagnostics and he said that there is pressure on the sensor
@abo taahir It looks like he may have ran diagnostics on a different system in the car. You will need to get the airbag system scanned by a scan tool that plugs right into the OBD port. (OBD plug in is located below the steering wheel) When you get the car scanned for airbag codes, you are welcome to reply here and let me know what code you are getting?
@@MyAirbags thanks alot
@abo taahir no problem! glad to help!
For short circuit to ground in the anchor pretensioner, where is the correct place to look? At the module?
The easiest place to check is at the seat belt pretensioner itself to see if it good or bad. Good seat belt would give you a reading between 2 - 3 OHMs
Hi My Air Bags, ... well, I have a 2011 Hyundai Elantra GLS. My airbag indicator on the dash turned on occasionally and sometimes went off by itself. But not it turns on and stays on and does not go off. I have not been in an accident. It has been bothering me a lot these days. Any idea what it could be?
Hi Aaron,
The first step is to diagnose the airbag light. Hook up the scan tool / scanner to the car and read the airbag codes. You connect the scan tool right into the OBD port/plug. Its usually located below the steering wheel, on the left.
Hello,
I have an elantra 2014 , the airbag light goes on and off mostly when i move the steering wheel too much right and left... what could be the cause?
Thank you
Hi! Thanks for commenting! It sounds like it could be a bad connection in the driver steering wheel airbag. There a lot going on behind the airbag. Most likely the clockspring it self or the clockspring plug going from the clockspring to the airbag. This is just a guess.
Best way to find out for sure is to wait until the light comes on, during this time have the airbag system scanned with a scan tool. The scanner will read out the code that will allow you to know exactly where the problem is.
When you end up finding out what the issue was, would you please reply back to us here? I'm sure theres plenty of other people with the same issue that could use your input.
@@MyAirbags I checked the wires under the driver and passenger seats, all good... i am suspecting problem in the clockspring ... thinking to change it...
The clock spring is a very common problem. That would be a good start. Thank you for letting us know what you found out!
Heres some helpful instructions from our MyAirbags.com Help Center: help.myairbags.com/hc/en-us/articles/360001388368-MyAirbags-How-to-Replace-Your-Vehicle-s-Clockspring
Is the Control Module in the same location in a 2003 Elantra?
Justin, the 2003 model will probably be pretty different as far removal steps but the actual should location should be about same. Its under the center console on the floor, or under the radio console, on the floor. Please share with your findings with us! Thanks
Hello i have a 2016 hyundai veloster turbo AT with code B1620. I hooked up a scan tool tried to delete it and it comes back on instantly.
Kevin, thank you for the comment/request. Was the Veloster in an accident or did the light randomly illuminate n on its own one day?
@@MyAirbags it just popped up randomly but i was still under warranty they replaced the whole unit
Disculpa, para que es cada entrada?
Cual es el cable de la bolsa de aire?
Wire for airbag control module?
Hi, i have elantra 2012 and the code error is 1748-00 what can i do?
Bryan,
Code B1748 for HYUNDAI is: Pressure-Side Impact Sensor Front Passenger Communication Error.
Possible Causes:
Faulty Pressure-Side Impact Sensor
Pressure-Side Impact Sensor harness is open or shorted
Pressure-Side Impact Sensor circuit poor electrical connection
My Airbags How can i fix that? the airbag warning light in the dash does not go out and the one next to the clock does not, I need to fix it to take the car to inspection, I just bought it
Theres an issue with that impact sensor. Its either not connected properly or needs to be replaced. Once the system no longer detects a problem with that impact sensor, the light will turn off.
Where is the Location of that sensor? I changed the clock spring because the buttons in the steering wheel did not work. They are working now, but the light is on
one more thing to add to the question below, I think it might be the passenger airbag problem because the passenger bag indicator also sometimes flashed and stayed on and sometimes never turned on.
Hi Aaron,
The first step is to diagnose the airbag light. Hook up the scan tool / scanner to the car and read the airbag codes. You connect the scan tool right into the OBD port/plug. Its usually located below the steering wheel, on the left.