Ram Projector Headlights - Installing HID bulbs
Vložit
- čas přidán 16. 01. 2018
- In this video we review the installation of Morimoto HID bulbs into the Ram projector housings.
Questions?
Website - 💻 www.retroshop.us
Email - 📨 jeremy@retroshop.us
Phone / Text - 📱(314) 669-HIDS (4437) - Auta a dopravní prostředky
Hello . I just replaced my Absolute HID bulb on my RAM 1500. Coz it burned out. All fitted well . I turned the light on and still not working . Do I need to reset anything . Or how do I troubleshoot further ?
Hi! I have a 2010 Ram Crew Cab and was wondering if those OEM or the After Market headlights will fit it. Thanks,
Sure will, with the use of our projector adapters. We have them on our website, www.retroshop.us - TY!
If I have converted to projector from quad headlights w/ the resistors , do I need anymore resistors if I want to add HIDs to the projector headlight
It depends on the year of your truck.
Have you experienced in moisture getting inside by not drilling the hole in the dust cap?
No, no holes - not an issue. Water won't go "up" the small area where the bulb wires come out, and the OEM dust grommet keeps it sealed up.
I have a 2018 ram rebel. I enjoyed your video. I don't like the stock bulb color and want a little brighter but not blind everybody, Any suggestions what kit to buy?
Sure, we have our HID kits for that model here - retroshop.us/collections/hid-kits-1/products/15-ram-projector-hid-kit
@@RetroShopLights Guaranteed not to mess with my trucks CPU?
@@PNWlawnguy1973 Yeah, we've been selling that same kit since 2015. We know it works!
Does moisture get into the housing and fog up the headlight
not if the bulbs are installed correctly
I have a 2012 ram 1500 slt and i want some of this projector headlights. Where can I get them?
We have them on our website - www.retroshop.us
What more worth it buying this oem projector and installing hid or get the oem quads and get them retrofitted?
both are great options. The quads retrofitted will have a slight advantage - so its really up to the customer on what they'd like to see (overall look of the lights)
RetroShopLights thanks for quick response time to save up for some headlights
Please let me know the kit I need 2017 ram 1500 with single low beam projection and do I need canceler
Sure, you will need this kit here -retroshop.us/collections/hid-kits-1/products/15-ram-projector-hid-kit
9012 didn’t fit mines it says 9005 on the low beams so what does that mean for HIDs bulb
It means.....order 9005 ;) In 13-15 Ram used 9012 bulbs, in 16 they changed to 9005 for the low beams.
So low beam 9005? Right
Yes, if your truck (or headlights) are 9005 for the lows, snag that for your hids.
Does the hid bulb wire face up or down?
the HID return wire normally should be at the 6PM position. You will find in the OEM projectors, they will not do this - as Ram cocked the bulbs at an angle. Pass side will be around the 8 spot, drivers at the 4 (ish)
I purchased projector headlights that fit 9006 and so ordered same HiDs and they do not fit in the housing. It hits the metal piece that cuts the light.
Not sure how to get them to fit in there.
Any help/suggestions are much appreciated
What about turn signal bulbs. My right turn signal is out
These use a circuit board for the turn signal, not a bulb. If the signal is out, the entire board needs to be replaced.
I want the headlights to be just like the ones on this video
Sure, those are the stock ones - we keep those here, ready to ship!
RetroShopLights will they fit my 2012 ram 1500 slt ??
Yes, any 4th Gen.
RetroShopLights I just want to make sure I buy the correct ones
RetroShopLights can you send me a direct link
if you want to know the WRONG way to install an aftermarket set of HID bulbs, this is the video for you
Genuinely asking, how’s this the wrong way to install and do you have a video recommendation for the correct way?