My Review Of :- LNER Class A3 4-6-2 'Harvester' + 3 Plank Wagon Pack

Product Info (Class A3 Loco)
Nigel Gresley’s A1 Pacific class emerged in the twilight years of the Great Northern Railway, a result of an idea that Gresley had nurtured since 1915. The First World War put his plans for new express passenger locomotives on hold but he applied his new three cylinder, conjugated valve gear designs to the O2 and K3 freight locomotives before returning to his plans for an express passenger Pacific in 1920, producing his 4-6-2 A1 design.
No.1470 ‘Great Northern’ was the first to enter service on the 11 April 1922 and Gresley confidently claimed that his A1 class could pull 600 ton trains which in September 1922 no.1471 ‘Sir Frederick Banbury’ did. Compared to the similar LNER design by Vincent Raven, Gresley’s A1 consumed less coal and water and was considered the better design, consequently the LNER chose the A1 design over the LNER A2.
The original eleven engines were built to the generous loading gauge of the GNR and after grouping in 1923 had to be modified to fit the loading gauge of the LNER with the chimney and dome both being reduced in height, plus the fitting of shorter safety valves.
The A1s quickly showed their ability to haul heavy loads on the East Coast Main Line but coal and water consumption was inefficient which was highlighted during the 1925 Great Western Exchange Trains with the A1s comparing unfavourably with the Castle class design. Consequent alterations to the steam lap settings and valve travel showed a reduction in coal consumption and this was adopted on all of the A1s by 1931. The piston valve rings were also replaced by the Knorr type piston valves which reduced steam loss.
Gresley had experimented with a different superheater to improve the A1s performance further but lacking significant results decided that he would increase the number of flues in the existing Robinson superheater. This coupled with an increase in boiler pressure led to improved performance and five of these new boilers were ordered in 1927 and were fitted to No.2544 ‘Lemberg’ and No.4480 ‘Enterprise’ later that year. Trials on these two A1s proved successful and so between 1927 and 1947 all of the A1s were rebuilt as Class A3 with the exception of No.4470 ‘Great Northern’ which was eventually rebuilt by Thompson in 1945 as Class A1/1.
Due to the wider header on the A3 boilers the ends projected slightly through the side of the smokebox and so cover plates were fitted to hide these projections becoming the main external distinguishing feature between the A3 and A1 locomotives. Locomotive No.2573 'Harvester' was built right in the middle of the classes construction timeline. A North British Loco Company built version of the A1 Class, the locomotive would enter service in October 1924.
The locomotive would be rebuilt to the A3 Class with haste, emerging as the upgraded version in April 1928. The locomotive would be renumbered 74 under Edward Thompson before becoming BR engine number 60074 on Nationalisation. Withdrawn on the 8th April 1963, the locomotive would sadly be scrapped before the end of the year.
Tech Specs
Item Length - Without Packaging (cm) 29.1
Item Height - Without Packaging (cm) 5
Item Width - Without Packaging (cm) 3.5
Item Weight - Without Packaging 0.3
Item Scale 1:76 Scale 00 Gauge
Finish Painted
Colour Multiple
Gauge OO
DCC Status DCC Ready 8 pin socket
Operator LNER
Designer Sir Nigel Gresley
Wheel Configuration 4-6-2
Livery LNER Apple Green
Minimum Curve (mm) Radius 2
Motor 5 Pole Skew wound
Number of Parts 1
Buffer Type Sprung Metal Buffers
Coupling Type NEM Tension Lock
Product Info (The 3 Wagons)
The open wagon is one of the most ubiquitous types of wagon to ever see service in the UK. Regardless of their size, the wagons could be seen almost anywhere from individual wagons being moved by small tank engines to large rakes of them being hauled behind some of the largest tender engines of the day.
The wagons were largely unspecified, they would carry any cargo that didn't require any protection from the elements. As time progressed and rolling stock developed, the general use wagon would see its use become more limited, wagons designed specifically around their cargo would begin to supersede the standard open wagon through the 1940s and 1950s.
Many open wagons would find their way into private ownership, with each company then commissioning one of the Big Four companies to move their wagons to their destination. These plank wagons are typical of the kind that could be seen making up a colourful patchwork behind one of the Big Four's freight engines.
These open wagons are fitted with NEM couplings and metal wheels, allowing them to roll freely and therefore allowing them to run in long rakes behind even small locomotives as may sometimes be tasked with hauling them. These wagons also have internal plank detailing, a load need not be fitted if you do not wish to add one.
Tech Specs
Sorry, ran out of room for Tech Specs & Automatic chapters 🙁

[@stephensonsdynamometer6747]

What a smooth runner! I like it.
But that red 7 plank waggon has something special 😉

[@Jimyjames73]

Thanks Bee 😊 & that is the reason why I got that Red Wagon - not only Red is my Fav Colour but also it has my Name on it as well!!! Thank you for watching Bee 😉🚂🚂🚂