How to change car engine oil | Changing car engine oil | Castrol U.K.
Vložit
- čas přidán 9. 07. 2024
- Regular oil changes are just about the best thing you can do to maintain the power and efficiency of your car, not to mention helping you to get the longest life out of the engine. That's why it's good to know how to change engine oil. ⇨ Subscribe here to our channel: hbit.ly/castroluk
⇨ Read this blog to learn more about car engine oil: www.castrol.com/en_gb/united-...
⇨ Check out our website for more information: www.castrol.com/en_gb/united-...
⇨ Castrol Oil Finder: www.castrol.com/en_gb/united-...
____________________
00:00 - Intro
00:46 - Step 1: Safety measures & Set up
Use the jack stand to support your car by placing it directly underneath the frame.
01:47 - Step 2: Draining the oil
Tie a rag around your wrist so the oil won't drip down your arm. Place your socket over the drain plug and loosen it a little, and finally use your hand to remove the bolt.
03:28 - Step 3: Replacing the oil filter
Take your oil filter wrench and place it over the filter to loosen it. When loosened use your hand to remove it.
04:12 - Step 4: Replacing the oil
Remove the oil filler cap, place the funnel and hold it while you pour the oil slowly. Afterwards, put the cap back on and remove any oil contamination from the surface of the engine.
04:52 - Step 5: Checking the oil level
Find the dipstick, which is usually bright yellow or orange. Take the dipstick out and check if the oil level is between the two markers. Wipe it clean, and stick it back in its place.
⇨ Click here for the full playlist: Changing car engine oil
• Changing car engine oi...
____________________
Welcome to the Castrol CZcams channel. Castrol is here to serve every driver, every motorcyclist and every industry on earth. We do this through Liquid Engineering. On our channel, you'll find the latest news on the right oil for your car or motorcycle. Do you want to know how to change the oil in your car? Or are you looking for a step-by-step guide on how to choose the right oil for your engine? Watch our videos, let us know what you think and share, like and subscribe to our channel.
- Follow Castrol U.K. on these socials -
Castrol U.K: www.castrol.com/en_gb/united-...
Facebook: / castrol
Twitter: / castroluk
Are you German, Polish, Spanish, Italian, Romanian or French-speaking? Check out our other CZcams channels!
🌐 - Castrol Global: / @castrol
🇩🇪 - Castrol Germany: / @castroldeutschland1755
🇪🇸 - Castrol Spain: / @castrolespana6981
🇮🇹 - Castrol Italy: / @castrolitalia9648
🇷🇴 - Castrol Romania: / @castrolromania8167
🇵🇱 - Castrol Poland: / @castrolpl
🇫🇷 - Castrol France: / @castrol_fr
#CastrolUK #EngineOil #ChangeEngineOil - Auta a dopravní prostředky
Have you ever changed your own car engine oil before?
Yes I did but was not a success! Thanks for this great structured advice
Did it once and failed miserably…😂
Thanks! 😀👍🏻
I tried but overfilled it.. thanks for this video!
inch hjl
Thanks, Castrol! Finally found a clear video that explains everything fully.
I always struggled changing my engine oil, but thanks to this video from Castrol I finally managed to succeed quickly and thoroughly!
This is the cleanest tutorial I have ever witnessed.
I never knew which one to buy. thanks!
You should wipe the oil filter mating surface with a clean cloth to remove any dirt and more importantly for newbies to make sure the old O-ring off the filter is not stuck on there, this would cause a disaster of a sprinkler of oil everywhere when you start your engine. Ideally you should also try and prime the filter with new oil so the initial start up is quicker at building up oil pressure, also when you remove the oil filter this can cause a bit more of oil to release back to the sump so after removing the oil filter and it's stopped dripping everywhere from the filter housing put your drain pan back under your sump plug and undo it and see the extra amount of dirty oil come out. If you are wanting to do the job properly the whole idea is to remove as much of the old oil as possible. A lot of garages won't bother going to these lengths because time is money and it's just another car to them. You can do a lot better by doing as best a job you can and use good quality correct oils and filter as possible. A lot of garages buy cheap bulk oil which is poor quality.
Lots of things missing !
Where is your Torque Wrench??!!!
You say that the car should be level when draining the oil, then promptly raise and support just the front of the car.
Just Awful. No mention of making sure you use the correct specification oil for your car.
The thing you stop your car rolling away with is called a chock not whatever you called it.
Always let the Jack down so you know the weight is on the axle stand.
If an amateur uses a ring spanner the way shown it’s likely. They will overtighten the plug or strip the thread.
You mentioned hand tightening the filter but didn’t actually tighten it fully.
You didn’t mention or show a leak check.
Withdraw the video and remake it.