All the RUST Techniques! The Painting Story of the Chaos Knight ABOMINANT!
Vložit
- čas přidán 16. 07. 2024
- This is the story of creating the Chaos Knight Abominant!
The paint scheme is used for the Decima & Incarnate Slaughter!
In this video, we will explore the use of Streaking Grime / Streaking Rust, dirty down rust deposits and a tonne of weathering effects!
This scheme can also be used for the painting of The Pallid Hand, Apostles of Contagion and The Rotworm Brotherhood!
P.S. We are offering 4K quality on our videos! So remember to change that quality if you can!
This is one of the first videos that is offering 4K quality.
00:00 Welcome to NuHue!
00:38 Introduction
01:27 Uncle Arthur's wise wisdom!
02:27 Assembly
04:19 Posing
05:27 Sculpting - That flayed flesh cloak!
10:51 Priming
11:30 Scheme
12:25 Painting - The frame! Did we choose TMM or NMM?
27:00 Painting - The armour! Is there enough rust on it yet?
52:58 Basing - A pretty world for a dirty Knight.
54:11 The reveal! Which part is your favourite?
55:03 The conclusion or our story.
55:28 The outro. Don't disturb Uncle Arthur!
Until we meet again! Farewell, from NuHue.
Paints used:
Red Primer
Citadel Paints:
Lead Belcher
Rhinox Hide
Sotek Green
Eshin Grey
Skrag Brown
Khorne Red
Flayed One Flesh
Zandri Dust
Dawnstone
Steel Legion Drab
Mephiston Red
Blood for the Blood God
Typhus Corrosion
Lahmian Medium
Nihlakh Oxide
Vallejo Paints:
Field Blue
Orange Ochre
Carmine Red
Verdigris Glaze
Leather Brown
Black Brown
Blue Green
Pale Sands
Light Turquoise
Ivory
Light Rust Wash
Environment Rust Texture
AK Interactive:
Crusted Rust Deposits Dark Rust Deposits
Crusted Rust Deposits Light Rust Deposits
Rust Streaks - Enamel Paint
Abteilung 502 Oil Paints:
Dark Rust ABT070
Light Flesh Tone ABT135
Turquoise Lights ABT515
Light Rust ABT060
Patreon:
/ nuhue - Zábava
Hi everyone! Thank you all for the amazing comments and feedback so far. It means a great deal!!!
I am aware of the audio issue in the video, unfortunately this was due to CZcams's uploading process. I had attempted multiple times in resolving the issue before publication but each upload took over 17 hours for CZcams to process with each attempts being just as unpredictable as the next!
The next upload should hopefully resolve the audio issue as it shouldn't take nowhere near as long to upload compared to this video.
I hope you enjoy the show!
The best audio setting I found is linear PMC, I'm using da Vinci resolve. Also for the contaner I've notice better resisult with QuickTime than MP4
I really like the all of these rust effects, especially the red + yellow (never seen that before). But I think the inner panels (tops of hips, knees, tail, etc) look too new for the rest of the miniature + jars too much. Like the chassis is very recent, but it's had some old panels bolted on from somewhere else. I think you could have achieved a lot better + more cohesive impact by rusting + weathering the rest of the model. too.
Great video! Now you just need to not immediately disappear again and this channel is bound to take off!
Thank you! I hope you enjoyed the show.
Disappear again? I've been right here this whole time. 👀👀 I'm hard at work on the next releases!
A really, REALLY great but slept on hobbyist. This man's talent is incredible. You deserve more subs. o7
Thank you Fitz. Slowly but surely it will come! I'm already blown away by the reception we have received.
this is probably the best knight ive seen. The fact that it doesnt rely on freehand to sell its indetity shows how awesome this model was painted.
Thank you Rafael! very warming to read. I hope you enjoyed the show! If you enjoyed this creation we have a WarDog video giving it the same treatment.
The level of detail you put into this makes the piece tell its own story. I can imagine some doomed space marine platoon that was flayed alive to make that cloak. Well done my friend. This channel deserves to grow and flourish. Hats off boss keep it up.
Thank you for the kind words Blake!
From your comment, I now imagine marine, after marine lined up, gutted and ripped of their flesh just to make a decorative piece!
@@NuHue SKULLS FOR THE SKULL THRONE!! BLOOD FOR THE BLOOD GOD!! This is why we love chaos. Nobody does it like they do.
I’ve been watching tutorials all day but I’ve bookmarked this one for when my lancer arrives. Idea stolen. Great tutorial.
Loved the weathering on the armour. Top class!
Thank you McC! I hope you enjoyed the show.
This is beyond gorgeous!
Thank you so much! I hope you enjoyed the show!
Best painting I have ever seen! Amazing!
Thank you so much! A very heart warming comment!!!
Great video! Loved the time you took to go over, explain, and show the process of the entire piece. Looking forward to more like this.
Thank you! I hope the show was worthy of your time! There will be plenty more coming in many formats.
This was absolutely awesome! lots of fantastic techniques I cannot wait to try out some day!
Excited to see what you do next!
Thank you Ace! More is on the way.
this is really nice to see the steps gone through. i did the words good in that sentence.
Thank you so much! I hope you enjoyed the show.
Great video! Looking forward to more!
Thank you! a lot more is on the way!!
THIS WAS A FANTASTIC VIDEO, GREAT WORK
Thank you!
Learning a load from this video..thank you
Thank you Colin! I hope you use some techniques!
The whole model is just sick man! Thank you for the tutorial.
Thank you Adam! I hope you enjoyed the show. There's more to come!
I’ve just taken delivery of my Abominant so thanks for sharing man, I’m bricking it now! Amazing work, if I can pull off half of that I’ll be happy!
Thank you Fiftyonenorth!
You will have a blast in building your Abominant! Best advice I could give in this hobby is, take your time!!! Plan everything out and take it step by step. (If it helps, follow the videos steps and chapters).
If you are ever stuck, we do now have a Discord channel! Link is on the channels profile.
I Hope you enjoyed the show.
This is amazing, well done! This gave me the motivation to start working on my abominant & hopefully it turns out anywhere near as good as yours
Thank you Cole! Very happy to see the video motivated you! I'm certain yours will come out great in the end. I'd love to see the outcome someday!
Great vid man! I was struggling with ideas for my next knight and I’m DEFINITELY trying some of your techniques in this vid!
Thank you Xeno! I hope you enjoyed the show.
Beautiful job mate, well done love the in depth painting explanation for those affects
Thank you so much!!
That was a fantastically explained and brilliantly executed video. Subbed and waiting for more, good job.
Thank you so much! More is on the way!
This is amazing 👏🏼 I will be using some of your tips and techniques when I start my chaos knights. Your videos are so good,packed with information, keep up the good work 👍🏼
Thank you Ian! I'm glad this video provided some tips and techniques! Theres plenty more content to come.
Like others below, one of the best painting videos I've seen on YT for a long long time... hopefully we get to see more from you....this looks like a few Titans I've seen on Insta over the last few months, so it's great to see the process behind it all...
Thank you Laurence, that comment is very heart warming! No need to hope, there is ALOT more to come! Unfortunately they take time... I am working on multiple projects simultaneously so, if all goes to plan I'll be releasing in chunks. This way I can then start working on another mammoth of a project like this one!
Thank you for your video it has been incredibly informative for me as Ive recently purchased an Abominant and will be putting some of your techniques to work myself 😁
Thank you Gary! Means a lot to read such a comment! I'm glad you found us and I sure hope some of the techniques prove useful! Would love to see the end result.
This was awesome!
Thank you ZomBear! I hope you enjoyed the show!
Great work dude love it
Thank you Wayne! I hope you enjoyed the show! (P.S. There's another Knight is in the works!!)
very good video, well produced and comprehensive. subbed immediately.
Thank you so much! I hope you enjoyed the show!
Really nice paint job, and awesome guide! Keep up the good work! Ill for sure steal some (if not all) the painting tips for my Abominant! :]
Hi Lars! Thank you for the comment! Please by all means "steal" away :) If there's any aspects you'd like to explore let me know and I can see if I can put something out!
Wow!
Hope you enjoyed the show!
This is amazing and i just checked some of your other videos. You are super nice and in depth.. Im making the same knight with diffrent colors but i thibk ill give him a cape similar to the one you gave this. Very excited so thank you. You earned a subscriber and hope more follow.
Thank you so much for the kind words Firmak2! Means a lot to read this.
Very happy to see this video brought some inspiration!
There's plenty more to come. I'm neck deep in the next few instalments. Lots more ideas, lots more creativity to come! Glad to have you as a sub!
Amazing scheme dude! I’m getting my first chaos knight today and am going to try to replicate your style!
Subbed. This is great art!
Thank you Arch! I hope you enjoyed the show!
Throughly enjoyed this, still very new to the hobby so this was very informative
That fills me with joy! I do hope some parts here are useful.
@@NuHue I really enjoyed the rust and weathered copper parts once I've finished my necron army I think I'm going to tackle a some chaos and try some of the techniques here
@@jimmckenzie960 Once you start weathering techniques, they become highly addictive!
Been waiting for this, thanks!
Edit: super informative video!
Thank you Bas! Its been an insanely long process! I never intended the video to be nearly 1hr long... But there was just... so... much! I'm glad you enjoyed it.
@@NuHue Chapters (or however the youtube timestamp thingies are called) might help make the video a bit more managable for people when using it as a reference :) Be sure to post this on reddit to get some more visibility! you deserve it!
@@bas_6983 CZcams aren't very clear on how they are activated, I "think" I've done what's needed to enable them, they state placing in the description will autofill the chapters but it doesn't look like its taken effect yet. But you are right! Chapters are needed here.
Impressive work I've learned alot
Glad to hear it
i have to say by the 6th time of applying a rust effect i was like isnt this rusty enough haha. gw should make these in metal and we could leave them in the back yard lmao
having said that the artisanship and diligence here was pretty incredible. excellent, deliberate and patient execution of all the steps does pay off and creates some of the best weathering i've ever seen. dope video man
liked and subbed obviously btw, just saw you were relatively new so gl with the channel dude
Thank you Tatooine! There can never be enough rust! It would of been easier if it where metal. Then I could just leave it outside for a few weeks and be done with it!
Looks fantastic, thinking of using some more rust effects on my iron hands.
Hopefully something useful can be used from this video!
Excellent ive subbed. Now to watch the rest.
Glad you found us Russell! I hope you enjoyed this show and the rest of the channel! There's plenty more to come.
very relaxing asmr thank you sir very good
Top quality video and channel
Thank you Gundam!
shit this is great i went to look and see other videos you made and this is the only one well done keep the great videos coming
Thank you so much! This is the first video to bring the channel into life, but do not worry, there is alot more coming with some great projects underway!
Excelent job there, not 100% sure about that last rust finish, deluxe model products do a rust kit that uses fine granules of i guess iron and a reactive agent to aquire the rust ,its good stuff,take a look if you havent seen it.
Thank you Mr Ziv! The last rust is Dirty Down, I wanted to go for a "balls to the wall" rust. I haven't seen or heard of that stuff before, but I've just found it online and ordered a load! So expect it to make an appearance soon!
@@NuHue glad to help!
Happily surprised this is your first video, I hope all the best for you! Super well done, the whole process. Smooth and calm voice and nice explanations and it was interesting how many techniques was used. I learned a lot. One piece of feedback is your volume could be slightly higher.
Thank you Reimerh, I hope you enjoyed the show! I'm aware of the volume issue, unfortunately it was an issue with CZcams after the uploading took place.
really great job bro
Thank you Vanilla! Hope you enjoyed the show!
@@NuHue the production quality was phenomenal
@@vanillaicecream5226 I actually delayed releasing the video because I panicked about the inadequate production value! This comment is very heart warming to read.
10/10!
+1 sub sir, your work is amazing
Thank you so much! Glad the video was worthy of your time!
Algo sent me here, lovely stuff
The mighty algo has turned his favour to me! Very happy to see you here! Hope you enjoyed the show.
THIS YOUR FIRST VIDEO???!!! JAYSUS! WHERE YOU BEEN? YOUR SUBS MUST OF GONE THRU THE ROOF!!
First video! I wanted to take the time and make a video which was 110%, just to show the world what this channel is capable of. I have to admit, I didn't expect the reception I've had so far! It's incredibly heart warming.
@@NuHue your definately off to a flyer bud,your work is definately worthy of the long format too. It was good that you explained how some of the techniques you used dont cross over to smaller scale figures too,its things like that which save a lot of frustration for a lot of us!! Lol!
Looking forward to seeing plenty more!
@@mrphucyoo8281 I certainly did enjoy creating the longer format of video! It is a double edged sword though, for example this video took me 3 months to create and produce and not that many people like to "engage" in the longer videos... This wont discourage me from making them.
Awesome sort of Cajun accent!
I sure did try!
god that looks amazing, and do I sense a nurgle knight upcoming from those end credits? if so cant wait to see what ideas come from that, and how similar it could be to my own monster of a kitbash for a DG knight
Thank you Necro! Means alot to see your comment!
There certainly will be more Knights in the future! I have a large project series which will involve Knights of various factions! So you might be right.
The end credits are a hint at what's next to come! Again I have ALOT of project series in mind which I hope blows peoples minds.
As a sidenote, I have made one Death Guard themed Knight before and I have given some sneak shots of it over on the FaceBook group, (Dont worry there will be more!) But take a quick look! facebook.com/NuHueMiniatures
Hey, firstly thanks for the amazing video. Ive must have watched it a thousand times and keep going back to it to look at certain techniques. One particular recipe is your NMM recipe, that u use. I really love it and used it loads. However it is quite brigth so i was wondering if u have a simular recipie for a darkish/blackish nmm . Thanks in advance!
So an odd thought, when you were doing the cloak you could have drilled small matching divuts in the two pieces of wood, and then placed some spare heads and skulls in one side, assuming enough detail would have come through the baking paper you could have gotten some some very cool texture baked in.
That is an interesting thought! For the next Knight, I had the thought of making a compression mould with the 3D printer to do chains, skulls, animal bits and human remains!
nice video mate, my only issue was the audio is a little quiet. I like your relaxed energy
Thank you LD!
This was one of the best scale modeling videos I have seen in a while, and then you spelled armor with a u and ruined it. Fr though, this was an amazing watch, and I really look forward to seeing what else you make.
Thank you for the kind words! I hope the show was worth your time!
I have plenty, and I mean plenty of ideas for lengthy project series which hopefully encompasses a lot of what our hobby is.
Gaahhh! Those god damn English, spelling English words! I'll do better next time, I promise.
This is absolutly awesome! I give you an abo. Is there a chance get a video about dirty down rust?
Thank you! Yes I'll be doing a much more in depth video on the Dirty down that was used here.
Great paint job tho I’m not sure I would have used that base myself. I don’t think it carried the same drama and impact that you had created in the model. And I was supprised you added the dirty down rust, u had created such a great effect by hand in other places. Would you maybe use the dirty down rust instead sometimes? Or just the Acrylic and oil wash sometimes, or do you prefer the combination of both? I would love to know your opinions
Thank you Christian! The base wasn't of importance, I had spent so much time on the model, I just wanted to get it done! The base csn always be altered.
As for the rust, I like to combine both, I wanted to exaggerate the trim and the easiest way was with Dirty down, it was a bit of a learning curve and still is!
Beatifully done and very informative. I would say though, for me at least, the video sound was much quieter than other videos. Had to turn my system volume up quite a way to hear it.
Thank you! I hope some parts where helpful!
Yes, I am aware of the quieter audio, unfortunately the audio got butchered by CZcams during the uploading process... I had attempted multiple times in re-uploading and resolving the issue but every time CZcams would butcher the video quality or the audio! This upload was the happy medium which in its self took over 17 hours to process each attempt!
For the future, I may increase the audio majorly in anticipation of CZcams butchering it.
@@NuHue Jeez, 17 hours is no short feat! Either way, it's a fantastic model, need to figure out whether I can apply it well enough to an Armiger conversion I've done.
@@splatboy1408 17 hours is just the uploading! the recording and painting is another story...
You certainly can! The armiger's aren't far off a Knight. I will be doing an Armiger conversion in the future and I'll certainly be going through all the weathering on those!
1:55 me explaining to my play group how 3d prints don't count as buying new models.
Great job and glad you popped up on my feed. Not sure if it's been said by anyone else, but the voice over level was very low. Had to crank you right up to catch everything you were saying!
Thank you for the kind words! Yes the audio unfortunately got butchered by CZcams when uploading... The video took over 17 hours to process and it took 3 attempts, hopefully it wont be an issue with future releases.
@@NuHue Hopefully buddy! CZcams can be fickle!
What would I do if I wanted the skeleton to be less rusty than shown in the video? Scrub off more with a toothbrush? Drybrush on more leadbelcher?
If you are trying to achieve some rust, but not as heavily then you can just keep scrubbing and removing more and more until its just in the deeper recesses. Then simply reapply Lead belcher with the same technique used with the first colour layer on the skeleton. Use the large drybrush and dampen it with the sponge. Once you have that layer down, just a quick drybrushing of Stormhost silver to catch the raised areas.
Great Job! I'm trying to replicate this color scheme with my own knights but lack an airbrush. You mentioned that this color scheme was possible without an airbrush so how would you go about doing so? Also, how would you paint this TMM as well as the glowing red combustor and eyes?
Thank you Nicholas! Yes the colour scheme is perfectly possible without an airbrush! The technique would be the same way where I had done the NMM skeleton, use a large short haired brush, keep it lightly wet with a sponge and stipple/dab the paint layers on. You will need to take the time to build up nice gradual layers. If you are going to go as far as using the rusting effects here then this will help with hiding any issues you might run in to.
As for painting the skeleton TMM, if you had based with Leadbelcher then you can just simply drybrush over again with Leadbelcher and highlight with Stormhost Silver for the edges.
For the eyes, I firstly paint these black/brown, then thinly glaze over the colour you are attempting. if you take a look at 54:41, the top lense was painted black, glazed brown, then glazed red, then glazed orange, to finish I had used white to give the lenses the light glint. For the Combustor, base it black, use a white wash to sink into the recesses and then wash over the colour you want it to be! Keep the glazes thin so you don't get any pooling.
I must stress though, the airbrush does speed up the process ten-fold!
Looks great! How would the heavy use of rust look on non white (or off-white) armor panels look? My Knights are dark green and purple, I'm unsure if it will look good.
I also have a silver trim, and silver doesn't rust. So I should probably only put grime on it. I think the contrast of the pure silver rim compared to the rusted body could look great
Silver doesn't rust like iron, but it does tarnish or corrode with black silver oxide. I would look up old silver ware for inspiration
Thank you for the kind words!
It depends on quite a few things, I'll try my best to rationalise them in a single comment!
Firstly, it depends what material (Colour) you are having the trim, if its just a basic, paint over ceramic then the streaking rust will do perfectly (Do as much as you feel fit!) If it is a metal, for example the Abominant here had Iron trim and I wanted to achieve a completely, rust infected pieces all over. Contrasted against the White it does make it stand out, which was intended.
If the material reference for the trim is that they are the metallic Silver, then Silver doesn't rust, it tarnishes and becomes dull, but if the armour panels themselves are a source of rust then streaking rust will bleed onto them!
However, if your just colouring them silver and the material reference is that they are just metal, then rust away as much as you like!
Because rust is more of the red hue it does contrast very well against green, even if you are going for a more metallic basing on the trim. As for purple, I'd lean towards a copper trim and oxiding it slightly and then performing a rusting streak effect which is bleeding over the edge from the armour panels themselves.
For reference, I have painted other knights, bright green, dark green, Khaki green, blue/green and blue with all the same amount of heavy rusting. The only variation between them was just adding a more black rust effect as the paint gets darker. (With any colour, you will end up reaching a bright enough point where the rust will always show and that's where the detail captures your attention!)
I do plan on doing a Khorne inspired Knight build soon, it will be very bloody, very Red-dy and very rusty!
@@NuHue wow, thank you for the detailed explanation.
I was looking what other videos you did, only to see this was your first one. Great editing, cameras and explanations for your very first try! I'm looking forward to more
@@KawaiiAzusa You are most welcome!
This is the very first video, it was a meaty one, something to really push the boundaries and show people what to expect from the channel. There will be a lot more coming.
Man this is simply awesome!
Any suggestions as to where the waist extension piece or similar might be available to someone without access to a 3D printer?
Keep up the amazing work!
Thank you Mr Tpimms!
Without a 3D printer, your best bet is to ask someone who does. But! How about using two bottle tops reversed and stuck to each other, then using cocktail sticks as pistons? To fill in the torso ball, you could either use a similar shape pingpong ball cut in half?
@@NuHue thanks for the speedy reply! That’s a great suggestion, loved seeing you adapt the possibility of the legs, will 100% be giving that a go as it greatly increases the immersion and thematic of each model! Looking forward to what comes next!
@@MrTpimms Very welcome! Always happy to engage in any way possible.
More is on the way!
@@NuHue nice one! Love the engagement and the encouragement this video has given me to try the rust techniques, they all built on each other and that’s awesome!
With the posing of the legs was it just a case of choosing the angle and then setting with Tamiya extra thin?
@@MrTpimms Give the rust a try!
Thats it, just glue the pieces back together. Obviously ensuring there is enough plastic contacting so the glue can fuse the pieces together.
I love it.But one question about the Greenstuff cloak .
How durable is that? Because friends told me that is pretty fragile.
Thank you for the answr
Thank you for the comment! It depends on how thick you make the greenstuff, there are some parts on this cloak which are as thin as paper! However the durability of it is surprisingly good, once its cured, it is flexible and perfectly fine to being moved around within reason. If you are worried about its durability you can always go a little thicker with the contact points and "load bearing parts" but greenStuff is quite durable!
@@NuHue Thank you for the answer. I always wanted to try the GS and your result is so great that I wanna try it out on my next Big Boy
@@csabipapo give it a try! Hopefully something in this video was worthwhile. I am currently setting up a Discord where we can showcase our work and for an opportunity for me to see our communities work too! So I'd love to see what you create.
Fantastically grimy and rusted.
Thank you!
I think bigger models are easier, you got more space where mistakes vanish in, they are faster to paint and give a nice feel of accomplishment
Great video ! a real pleasure. How do you apply the pigment with the airbrush? is it liquid pigment?
Thank you David! Which part/Time stamp are you referring to?(Just to make sure I give you the correct response!)
@@NuHueYes, sorry, I specify. My question concerns the part where you airbrush the Knight's bone with the pigment, after painting metal and before brushing with a big brush.
Minute 13:56.
@@davidtesta4919 Ah! This paint is already suspended in a medium, once it evaporates it leaves just the pigments behind. It is fantastic stuff! Its AK Interactives Crusted Rust Deposits.
With the airbrush it goes on incredibly smooth and evaporates quickly!
@@NuHue thanks a lot for the information 🙏🏻
Glad I could help! I hope you enjoyed the show.
Feel bad about how my knights look now, hopefully I can weather them to look a fraction of these, mine are all built though so not sure if it'll cause me issues
Never feel bad!
If your Knights are put together it isn't too difficult to take the armour panels back off. If you used plastic glue, you can use Tamia extra thin to reactive the glue joins!
Have you tried the Abteilung 502 oil for the copper oxidisation colour? Or do you just prefer your recipe? Tossing up what to buy.
Edit: well I could have watched the video for 3 more seconds haha
Haha! I think I've used a lot of the Abteilungs oils throughout all the videos I've uploaded! I really, really like them!
@@NuHue I’m ordering 5 on payday. Do you have top 5 you could recommend? I was thinking of burnt umber, black, engine grease, sepia. I have quite a few options for rust that I’m happy with for now so not going to buy their rust colours yet. Mainly for painting over silver metallics to give some shadow and definition as well as for more weathering options. I am painting Orks currently.
very good job!
I'm really into the grimdark esthetic already in the 90ties i painted my minis with oils and umbroll like my ww2 tanks realy didn't like 'eavy metal painting, But one things is troubling me... all the rust... that's not you in particular but generals. lore wise in 38 millenium why everything would rust, is ceramite suppose to rust? have they lost all the alloys, the titanium, carbone fibers ect... and just rely on steel , coper end bronze ?
Still excellent work and you have a new subscriber
Thanks DoktoR! You me both, its hard to like the 'eavy metal style... To me it just seems slightly cartoonish?
The rust, mostly for the rule of cool! Without weathering in some way its not easy to get the image of age, decay or just simply not being looked after.
But none the less, I hope you enjoyed the show!
@@NuHue exactly cartoonis... Far from this univers would look like. Yeahh the rule of cool! ;) I will be painting my first 40k véhicules in the comming weeks, they might have a bit of rust 😉
@@DoktoRVoLoXGuitars go all out and do a full top to bottom rusted machine that isnt fit for war!
@@NuHue 🤣🤣🤣 sorry mate l'm to much rationalist for that, but don't worry it will be grim, with dust, mud, oil, blood and a bit of rust😉
Hello this is my 1st time trying rút effect. For the white spirit, do I need to take caution or dilute its before use?
Hello! No not at all, there's no need to dilute white spirit. Wear protective gloves so the spirits don't leech into the skin. My only caution, don't press the model with force when using white spirit. Because it can damage the paint. Just be gentle.
Have fun!!
@@NuHue thank you! I have another question.
how do you know where the light are when painting? ( can the model be semi assemble for picture - for highlight reference) sorry this is my first big model
do the rust effect take away too much of the paint work?
@@phamhoangthong4815 Very welcome! So i partially sub build any model and its dependant on getting clear and clean access to certain areas. As for getting the right lighting then I would test fit the parts so I can visualise how it would look.
As for knowing where the light comes from, it depends which direction you are imagining the light, (my go to is the top right side downwards) As for how it affects the shapes of the model, this can be more complex. but generally, you want to keep all the highlights to the most centre of the shape, this includes the entire overall shape and not just a simple circle on everything!.
The rust effects would only remove the paint if you are too aggressive and you dont clear the rust off enough, but its your preference on how the rusts effects the paintwork underneath.
@@NuHue thank you so much, but the rust style fit with any schemes? I plan to have my Chaos knight with red brown (burgundy?) with the blue spirit light like its from tzeentch
@@phamhoangthong4815 That really would depend if you like the look! The effect will mostly work but you may need to play around with it to find your desired effects.
When weathering the armour panels, you're applying the white spirit, then brush strokes, and after that the cotton bud. But you mentioned that using the cotton bud is only a good idea if you want to remove everthing. Why are you doing it in that order, and are you avoiding any areas specifically?
It might be the speed of the video that's confusing it. After putting the Streaking Rust down, its then saturated with the white spirits, this is to reactivate the top layer, the brush is then used to scratch the top layer exposing small streaks to different degrees, the cotton bud is then used again to re-saturate the area and allowing the spirit to either drag the pigments down and away (following the exposing brush strokes). I mentioned using a fresh new clean cotton bud, a fresh new cotton bud will remove areas completely which you can see in the video (Good visual of this is on the top carapace at 40:12) , this allows the spirits to then spread the pigments into the cleaner areas to give the edges of the streaks space to blend out. However, if you continue to use the same, dirty cotton bud, then it doesn't remove the areas completely, you can use the dirty cotton bud still to manipulate the spirits instead.
You may notice, some aspects I'm dabbing the cotton bud, some areas in brushing with the cotton bud. Both have different effects!
@@NuHue Awesome, I'll try that, thanks! been having trouble using streaking grime and rust streaks to get the effect I want :)
@@NuHue What kind of weathering brush are you using? Does it have hard or soft bristles?
It can be a bit of a learning curve! The trick it to try and do as little as possible! Then layer.
Ideally, a thicker brush. Thicker tends to have less bristles which gives a nice scratched surface.
Question, when varnishing after the rust streaks, what type of varnish and can there be any issues? I use the same products, but haven't dared to varnish any enamels with acrylics before a few days of curing.
Hi Erik, that's a good question! I use Winsor & Newton Galeria Matt Varnish, simply because it's a good quality varnish and it comes in a large 250ml bottle which will last you a life time! However I have used Citadels 'Ard Coat before and it went down just fine! Make sure the varnish is fully dried before moving on. As long as the streaking rust's medium has evaporated (partially dried) then you wont experience any reactive issues with varnishing. If however, there are still some undried white spirits (mineral spirits) still on the model, then the varnish wont adhere and may pool in clumps. I haven't had this happen to myself!
@@NuHue It's funny that we use exactly yhe same stuff, i just use winsor oils instead as absolun or what theyr called. Thanks for the knowledge about the varnish. I've been afraid of ruining any project with a bad layer of varnish you know.
I was the same the first time round. I mostly apply my varnish straight through an airbrush, just for ease of use and an even coverage. But as long as you need the varnish smooth and thin, you will be hard pressed to ruin it!
If you are coating by brush then you can mix the varnish with 1-1 medium or water, it may take an extra coat but that way, you are ensuring a thinner and smoother coating.
@@NuHue I'm using a airbrush, the only time there been any problems with the varnish for me yet is crackling after applying over airbrushed liquitex inks. For some reason you need to wait alot longer than dry to the touc before varnish. Thats why i thought enamels would do the same.
@@eriksterlund Ah yes! That cracking would be due to the ink drying out and taking the moisture from the varnish!
What type of cutting mat is that?
Just a black matt from Amazon! It's an A2 size. If you search black cutting matt, you will find it.
Thank you!
The guy from the gentleman does Warhammer?
Shhhhh! It's a new movie from Guy Ritchie!
Struggling to find the waist extender bit files online, anybody got any suggestions?!
Jump over onto our Discord! (Links on the channel).
@@NuHue sorry mate as you know I’m new here 🤣
@@NuHue consider it done!
This man has a sleeper physique. I can feel it. Show us your split
There's a reason why I wear overly baggy clothes. Keeps that dark side a secret!
如何在没有喷枪的情况下使用 AK 交互式锈迹，它应该被稀释吗？
Hi Bok, You don't need to dilute the Streaking Grime. Straight out the bottle is fine. Just be careful not to swamp the model!
@@NuHue Is there a recommended Vallejo or AK for the red primer?
You neeed to show Morty!
I may need another year to finish the poor Primarch!! He "May" make an appearance shortly ;)
Great video, but the sound's way too low, even at 100% it's hard to hear.
Thank you Twist! Yes I am aware, unfortunately this is CZcams's fault. Hopefully I can mitigate it for the future!
@@NuHue Let's hope! Looking forward to your next video.
@@DasFork You and me both! Damn CZcams can be a nightmare, the next video will be here very soon!
Your streaking grime technique is quite intruiging instead of oil paints you use enamel, never thought white spirits can reactivate enamel paints!
Thank you! Yes for the overall the enamel is a better choice for the gritty effect, it dries faster and looks dry! You can thin down enamels with turpentine too!
i think i got an tetanus just watching this! nice work
Thank you, quick!! Get your tetanus shot so you don't miss the next video!
Glad to see Jake Pauls artistic side!
LOL! This takes top place.
is it just me or was this video extremely quiet
Feel free to read the pinned comment!
I liked watching this but I couldn't hear anything because the volume is so low and global warming is killing the planet so I have to have two fans running just to prevent myself from sweating while doing nothing.
So please normalize your audio levels ;)
Thank you! I hope you could at least enjoy the video!
Yes I'm aware of the audio, unfortunately it was out of my control due to CZcams butchering the video during its uploading process. Next time I'll increase the audio higher in anticipation of CZcams doing its antics.
Nutty good!
Thank you! Hope you enjoyed the show!
@@NuHue Sure did!
I have a Knight Abominant kit _literally_ sitting on the couch behind me... 😉
@@fl00d69 Get stuck in!! I do also have another Abominant on the bench waiting to be built.
@@NuHue What's your plan for the paint job this time around?
@@fl00d69 Tough choice! It really depends on how I build it. I'm kind of feeling maybe a purple, but I'm not sure!