The 295/65/20 on an a TOYO MT is 35.4 by 11.8 it says on the website. In the video he says it’s a 35.1 by 11.6 how much of a difference can that make Im kind of stuck wether to go with this setup or not
What offset is that king ranch 20'' wheel ? ..I have a 2013 ford f-150 Platinum 20'' Oem wheel as well.I want to put a Readylift SST 3.5 level kit .If your King Ranch is a 44 offset with no rubbing on upper control arm ,then my Truck will work as well. Please let me know..Thanks .Your Truck has a nice stance.
@@Painfulwhale360 Installed this kit on my 2018 F150 with the 20' Lariat sport wheels on a Toyo 35x12.50 M/T and the inside of the tire rubs on my control arm and ball joint! Going to try a 1/2 inch spacer see if that will give me the clearance I need without rubbing on the crash bars.
@@Ayosteeze did you end up putting spacers on? What offset are the sport wheels? Also he did say in the video that it will run if you have 12.5 wife tires so you’ll have to go 35”x11.5”
Neal, please help me… I have a 2018 F150 lariat. I put the 3.5 inch SST kit on it with 295 65 20’s on stock wheels just like the video and it’s rubbing my control arms.😩😫 why? I did everything you said. I don’t know what to do.
I want this exact setup with my 2018 F150 platinum. The platinum wheels seem almost identical to king ranch wheels. Do you know if they share there same offset therefor this same setup would work on my platinum?
Yeah same I got a lariat 2020 and the wheels look exactly the same but I’m stuck on wether if this setup will fit on my stocks without rubbing or cutting
I have the 3.5 sst lift in my 2016 f150. But the front struts are now shitting the bed. I need to replace the struts But I don’t want to go threw all the work of compressing the struts to get the preload strut spacers out the old struts and put into the new struts. I was wondering have you tried to go with a lifted struts from rough county with the 3.5 sst kit, instead of the strut spacers on factory struts? I noticed rough county sells a 2” leveling strut or a 3” lifted strut. I’m wondering if I could use the 3” lifted strut from rough country instead of factory strut with spacers?
Yes you absolutely can. It’s the same as adding a spacer on top of the strut/coil over. With the 2-3” rc leveling shocks you’ll get an even better ride quality
Not true! This video shares a lot of wrong information. I copied the exact set up and had to buy 0 offset wheels so I could correct the the issue of my tires rubbing the control arm. 🤦♂️
Bro, I’ve been watching you for years. I don’t want to come off bitter or anything but man Neal, I followed everything you said and for some reason it didn’t work out for me. It looks like the same exact wheels from this video. I have a 2018 lariat.
@@RealDealNealhey thanks for replying, hey it all worked out in the end because I bought some new wheels with a zero offset and I’m in love with it. Thanks and I’ll keep watching the vids
This is a very Sharp Akins/Wild Willies Truck Build. Please look into carrying some King Ranch Apparel to sell. Thanks For Sharing
perfect setup!! just needs a front full bumper Ranch Hand for me!
Absolutely
What is the exact level front and back ? Very nice indeed, but does it strain the control arms ??
The 295/65/20 on an a TOYO MT is 35.4 by 11.8 it says on the website. In the video he says it’s a 35.1 by 11.6 how much of a difference can that make Im kind of stuck wether to go with this setup or not
Have a 2014 f150 with 4 in fab tech lift I want the same wheels and tires will they work on my truck I heard all ford stock wheels are 44 offset
Is it a long wheel base or short
Where can we order the tires from??
What tire setup would you recommend for a 2019 STX Fx4 with OEM wheels?
Branononnn
In video it’s hard to tell but on f250 with 32’s lol how noticeable will 3.5” readylift and 37’s be in person ? Pretty obviously lifted ?
Yes
Van I get a price on that truck to make another?
question about the 3.5 lift... does it have blocks in the rear?
Yes
What offset is that king ranch 20'' wheel ? ..I have a 2013 ford f-150 Platinum 20'' Oem wheel as well.I want to put a Readylift SST 3.5 level kit
.If your King Ranch is a 44 offset with no rubbing on upper control arm ,then my Truck will work as well. Please let me know..Thanks .Your Truck has a nice stance.
I want to know this exact question as well
@@Painfulwhale360 Installed this kit on my 2018 F150 with the 20' Lariat sport wheels on a Toyo 35x12.50 M/T and the inside of the tire rubs on my control arm and ball joint! Going to try a 1/2 inch spacer see if that will give me the clearance I need without rubbing on the crash bars.
@@Ayosteeze did you end up putting spacers on? What offset are the sport wheels? Also he did say in the video that it will run if you have 12.5 wife tires so you’ll have to go 35”x11.5”
Neal, please help me… I have a 2018 F150 lariat. I put the 3.5 inch SST kit on it with 295 65 20’s on stock wheels just like the video and it’s rubbing my control arms.😩😫 why? I did everything you said. I don’t know what to do.
You must have the “sport” wheels
What’s the tire setup
Dam , good oh boys truck 😭
What color is that?
I want this exact setup with my 2018 F150 platinum. The platinum wheels seem almost identical to king ranch wheels. Do you know if they share there same offset therefor this same setup would work on my platinum?
Yeah same I got a lariat 2020 and the wheels look exactly the same but I’m stuck on wether if this setup will fit on my stocks without rubbing or cutting
Any progress on this?
@@mghtrock48 no, I have a 2017 lariat f250 now with 37’s on stock 20’s. It looks good but it does rub at full lock.
What year is this truck
Audio is off
Is that truck level? Looks like it’s higher in the front a little bit.
Thanks
Yes it is. Concrete is un level
Branooñ9n
Brañononionon
Branonononon
Branononononon
I have the 3.5 sst lift in my 2016 f150.
But the front struts are now shitting the bed.
I need to replace the struts
But I don’t want to go threw all the work of compressing the struts to get the preload strut spacers out the old struts and put into the new struts. I was wondering have you tried to go with a lifted struts from rough county with the 3.5 sst kit, instead of the strut spacers on factory struts?
I noticed rough county sells a 2” leveling strut or a 3” lifted strut.
I’m wondering if I could use the 3” lifted strut from rough country instead of factory strut with spacers?
Yes you absolutely can. It’s the same as adding a spacer on top of the strut/coil over. With the 2-3” rc leveling shocks you’ll get an even better ride quality
what is the brand of lifkit?
ReadyLIFT
Not true! This video shares a lot of wrong information. I copied the exact set up and had to buy 0 offset wheels so I could correct the the issue of my tires rubbing the control arm. 🤦♂️
This build worked with zero issues. Did u have the exact same factory wheel?
Bro, I’ve been watching you for years. I don’t want to come off bitter or anything but man Neal, I followed everything you said and for some reason it didn’t work out for me. It looks like the same exact wheels from this video. I have a 2018 lariat.
@@portalproducedit5906 so sorry. The wheel offset has to be different. That’s all it could be.
Run a 1.5” hub centric wheel spacer and you’ll be clear
@@RealDealNealhey thanks for replying, hey it all worked out in the end because I bought some new wheels with a zero offset and I’m in love with it. Thanks and I’ll keep watching the vids