Wood Turning - Beginners Guide # 8 - The Negative Rake Scraper
Vložit
- čas přidán 6. 07. 2024
- I show how to grind and use Negative Rake Scrapers
WyomingWoodTurner :
/ wyomingwoodturner
A link to Stuart Batty's thoughts on the subject of Negative Rake Scraping
woodturning.org/files/2013/01/... - Jak na to + styl
I’m an amateur turner and found your video extremely clear concise and helpful. Thank you very much.
I am pleased to hear that you found the video helpful John. Thanks for watching and commenting, much appreciated.
Mike, thanks for all of these videos. This is a series that is going to be referenced by many for years to come.
Thank you, that's very kind of you to say so.
Take care
Mike
Another excellent demonstration Mike. I'm going to do this on my big scraper tomorrow.
Take care,
Carl
Thank you Carl....let me know what you think...and any improvements you come up with.
Take care
Mike
Another very informative video Mike. Now I need to get myself some scrapers to give it a go. Love the finish you get, not sure if it's the scraper or just your ability, either way you make it look SOooooo easy as always.
Thank you.....Stevie
Stevie Rodger Thanks Stevie, I assure you it's the tool not my ability :)
Take care
Mike
I've really enjoyed watching some of your beginner videos today. I enjoy furniture refurbishment and have been considering what my next step into woodworking will be. You've done an outstanding job of laying things out plainly. Thanks for everything.
+Michael Stribling
Hi Michael, and thanks for your kind words.
The pleasure is mine.
Take care
Mike
Thanks so much Mike
You're one of my favorite mentors along with Richard Raffen, Robbie, Mike Pearce, Sam Angelo, The Rebel Woodturner and of course Cap'n Eddie. There's more of course but these are my go to guys
You've all taught me so much over time and I can't thank you enough
I watch a lot of you guys and the best thing I like is that we're all in this together sharing ideas, experience and results
Hi Tom, and thank you for your very kind and supportive words.
Take care
Mike
I am a novice wood turner and find all your videos highly useful. I ground both my scrapers to negative rake. They work much nicer than before. Thanks again for the tip.
Stephen Chesler I'm glad you find them of use Stephen, and thanks for your support.
Take care
Mike
Mike, I have been for some time watching your recent posts. I find them very informative. However, recently I have discovered some of you earlier posts and as a rookie wood turner find them extremely useful. Just like this one on the negative rake scraper. Taking your time to create a sample piece with deep lines illustrated your point very clearly. Keep up the good work.
Thank you for your kind words and support Tom, they are both very much appreciated.
Cheers
Mike
Dear Mike - thank you very much for sharing this video. Today I modified my halfround scraper like you showed in the video and I used it to a walnut bowl project. The result was super - a super hint for a beginner like me. I've watched several of your videos and I've always learned something new.
Take care - Peder
I did the same this morning with the same results :) Very happy with the NRS. Thanks for the video!
Mike this is the third time to watch this video i am going to regrind some of my scrapers thanks for the time you took to shoot this video a for real training aide
+Tom Palmer
Hope you like the results they give Tom....let me know what you think.
Take care
Mike
Mr waldt, great video, well explained and very easy to follow. I really hope you realise how appreciated and helpful your posts are for beginners,
Best wishes
Tony
22triggy Your kind words and support, are really appreciated Tony, thank you.
Take care
Mike
Mike, your tutorials have been a real godsend and I've enjoyed them immensely, as I do with all your videos.
Many thanks. Take care.
Alan
Thank you Alan, I'm really happy that you find them of use my friend. Thanks for your encouragement and support.
Take care
Mike
Great instructional video Mike. Thank you. I'm going to add negative rake onto my scrapers - you've convinced me!
Hi John, they don't solve all the problems, but they are a very useful tool to have in your armoury.
Cheers
Mike
Hi, Mike. Just acquired my first 3/4" half round scraper and ground it to a NRS...wow, works so beautifully. Just finished the left end of a large cove with it and it left a very nice finish needing little sanding...nice shavings and little dust. Thanks for your great instructional videos for new turners.
Hi Reeder, glad you like the NRS, and thanks for your kind words, and support.
Take care
Mike
+Pedar Kalser Glad you like the video, and find the NRS a good tool.
Cheers
Mike
Another great job! Thank you again for all the hard work it takes to shoot, edit, and post videos. I have learned a great deal from all your videos. Please keep them coming!
Thanks for your support and encouragement Earl, I really appreciate it.
Take care
Mike
Thank you Mike! I have heard people talk about negative rake and didn't understand the angles involved. As always your videos are excellent!
Thanks Jim, appreciate it.
Take care
Mike
Great video Mike! I've been watching for a while now and have learned so much. Really enjoy the beginners guide, just need to get my four jaw chuck and my setup will be complete. Have a great day.
Thanks Will, bet you can't wait to get the chuck, they do make life a lot easier
Cheers
Mike
Many thanks Mike for yet another great instructional video and you've certainly persuaded to me try and adopt it.
I could even see the reflection of the scrapers on the wood which says a lot.
I'm looking forward to your next upload which you say will be on the skew. I think most turners have an initial fear of the skew due to the spectacular catches you can get but I think I've passed through that stage and am getting my confidence with it.
I must say that the CZcams wood turning channel has to be one of the best as we can learn so much from some of the best turners imaginable and who, like yourself, give so much of their time and also enjoy a bit of good-natured banter.
With all good wishes,
Alan.
Thank you Alan, it's worth a go in my opinion.
A master of the Skew I'm not, but as you say a lot of people, especially new turners have a fear of it. Hopefully I'll ease the fear.....and NOT get too many catches ;)
Your kind words are much appreciated, as indeed is your good-natured banter :)
Take care my friend
Mike
Thanks Mike. This was the second time I watched this video. I tried to grind a scraper after the first watch ( about a month ago I think ) and it didn't work for me. I decided to watch the Wyoming Woodturner to see if he did anything different. He recommended your video, so I just watched again. I'll try again tomorrow with more precise angles this time. Thanks for your videos. I watch every one of them.
+Gary McCoy
Keep at it gary, and let me know how you get on.
Take care
Mike
Excellent Mike. I just figured out what I have been doing wrong. Thanks for another great video.
Brilliant Mike, makes complete sense. I can't wait to give it a go.
Thanks for taking the time to show us beginners some quality tips. Been a great series.
Regards ......... Geof
Thanks very much Geof, you won't be disappointed mate, remember just "kiss"the wood, very light passes, and the edge will stay keen, just that little bit longer.
Take care
Mike
Thanks Mike for taking the time to make this video & sharing your knowledge. I'm a new turner & am amazed that the finish that you got, a reflection of the tool can actually be seen in the wood. Guess what my next project is.....
Thanks Again & Best Regards,
Jon
+rcwarship
Hi Jon, glad that you found the video useful.
Thanks for watching and commenting.
Take care
Mike
Hey Mike:
I will find a scraper the next time I am out in the shop and give it a go!
Thanks for sharing
Larry
You won't be disappointed Larry - honest!
Thanks for watching mate
Take care
Mike
I was looking for the angle for a scrapper and look what I found. I should have just asked you and saved myself the trouble of looking. Geez!
Thanks for the great videos Mike now I'm off Tri the grinder
Take care my friend and do a kindness
Mark
Mr. Waldt. Good day Sir. I have not been able to watch any videos on You Tube for quite some time because of building my own shop. Finally today I can take a breather and WOW your shop has really improved!! I absolutely love how you have all of your turning tools. It looks great! So I just wanted to stop by and say hello and thank you again for the advice you gave me when I first started out on this journey. Maybe I can return the favor one day. Good tidings.Bobby Ray from Virginia.
+Robert Ray
Hi Bobby Ray, sorry for the late reply.
Great to hear you have a new shop, mine is still the same old garage, with a few bits changed over the years :)
Great too hear from you.
Take care
Mike
I will certainly have a go with one of these.
Thanks for the tutorial
Happy New year to you and your family Mike
+icespeckledhens
Let me know what you think James, I love 'em :).
The same to you and yours as well my friend, and thanks also for your support.
Cheers
Mike
Mike. Very thorough run thru. You may have convinced me. I'll have to test it.
Alan
Thanks Alan, I hope I have, you won't regret giving it a shot. Let me know if you do, and any suggested improvements would be greatly appreciated.
Take care
Mike
Nicely done Mike. Inspired me to give it a try and regrind a couple of my scrapers
+Peter Pihos
Thanks Peter, they are very useful tools to have in your armoury.
Take care
Mike
Hello Mike. I always enjoy your videos . And the funny thing is, I don't even own any wood working tools . Can hardly wait to see what's next! Thanks for the education.
jAMES hERRELL Lol.....thank you for your kind words, and support James, I really appreciate it my friend.
Take care
Mike
Thank you, Mike! This video clip for me was very helpful. Such chisels I have. Necessarily made.
My pleasure Uladzimir, thank you for watching.
Cheers
Mike
Hi, Mike
Great informative video. I have ground my Sorby round nose scraper(80*) to 80/20 negative - no 70 setting on Proedge system - worked well, but found 80 / 30 worked even better. thanks for all your videos.
Brian
Thanks Brian, thanks for the tip on your angles too.
take care
Mike
Excellent video Mike I'll have to bring my scrapers over for you to put the negative rake grind on them thanks for showing, kind regards.
Lol ... thanks Mick always appreciate you stopping by my channel mate.
Cheers
Mike
Excellent video mike very informative thank you don't know how i missed this one
Thanks Phill, appreciate it mate.
Cheers
Mike
I'm new to wood turning, and learning so much. Thank you
Glad to be of service Andy, and thanks for your support.
Take care
Mike
Good video, Mike! I'm going to try this out with my large scraper in the next day or two.
RickTurns Thanks Rick, let me know what you think.
Cheers
Mike
Great video Mike. I think my scrapers are going to be getting a bit of a touch on the grinder soon.
Best Wishes, Brendan.
Thanks Brendan, give them a go mate, you will love the finish they give.
Take care
Mike
Great series. All the info has made me a better turner. Thank you!
+Jim Rollins
Much appreciated Jim.
Cheers
Mike
Excellent tutorial Mike i will have a go with my scrapers
Happy new year
Yiannis (Athens Greece)
Thank you and the same to uou and yours.
Yet another excellent video Mike! I especially enjoyed the way you show how the top and bottom bevels are made... I've seen and read alot about negative rake scrapers but had no idea that 'BOTH' the top and bottom angles had to be ground or created to make a 'negative rake'! Thanks so much for taking your time to create this series, it is excellent and I'm sure, I'm not the only 'newbie' that has learned alot from them! Please consider a video on replaceable 'carbide tip' tools as it seems there is quite a bit of confusion on how to use them properly. Safe turning to you always!
Thank you Kenn, I am really pleased that you have found the series of some use. I am no expert with Carbide tools, but I did a video about them a little while ago that might be of interest, here's the link:
Wood Turning - Carbide Tools Review,
Hope it helps a little.
Take care, and thanks for your support.
Mike
Mike a great video, great information. I have been playing with the negative rake scrapers and this really helped clarify some questions I had.
Thanks keep up the good work it is appreciated.
Luke
Thanks Luke, glad you found the video of use.
Take care
Mike
I think I may be trying this. I have a cheap scraper to try it on first before I destroy a good scraper. Thanks as always for sharing. Looks like it leaves a nice finish.
Just what I did to start with Martin, experiment, and play around with angles a bit, and see what works for you.
Thanks for watching.
Take care
Mike
Thanks again Mike for a great demonstration....Like you said Mike it looks alot easier to use than a normal grind scraper with more control...
cheers Mick!!!
Thanks Mick, I am well pleased with it, it'll be a very handy tool.
Cheers again for your support mate, it's very much appreciated.
Take care
Mike
Outstanding Sir! Really trying to master these scrapers. Thanks for the knowledge!
Glad you found the video useful Jo.
I guess I'm showing my experience level here but I'd never even heard of a negative rake scraper.
I'm sold! Thanks, Mike.
Glad you're going to give it a try Luke, it doesn't replace the scraper, but is great for fine finishing shearing cuts.
Take care
Mike
Very interesting and something I will try. I have always suffered with tear out when scraping so I look forward to giving this a try.
Many thanks
Thanks Paul, I hope you like this option as much as I do.
Take care
Mike
Thanks Paul, I hope you find it as useful a method I do.
Take care
Mike
I thoroughly enjoy these video's. Will have to give this a try. And again thank you for taking the time to make and share these video's.
Thank you, I'm glad you find them of use
Take care
Mike
Hi Mike,
thank you for the informative video.
Especially the you the angles (17 and 30) have explained exactly how to use him. :-)
Thank you Gunter, the angles are 70° & 30° by the way ;).
Thanks for watching
Take care
Mike
Hi Mike hope you are well!
I recently found your channel and have gotten a recent interest in turning. Thanks for your video
Enjoy your turning journey Padraig and thanks for supporting my channel.
Another great video mike, if there is anything better than learning how to use a skew chisel it's learning about a new tool/version of a tool that I haven't heard of.
Thanks, Tim
Thanks Tim, I hope you give it a go, and like it as much as I do.
Take care
Mike
Thanks Mike,
Heard about the neg. scrapers and wanted to learn a bit more about them, as I have some soft spalted maple that takes a bit of finesse to keep from tearing. This video is just what I was looking for and will definitely be giving it a go.
Take care.
Pleasure Frank, and thank you for watching, I'm glad you found it useful.
I found that with a freshly hone edge, and a feather lite touch, it leaves a superb finish. Let me know what you think.
Take care
Mike
Excellent demo Mike,and very well explained,I met Sam at the AAW in Phoenix not much time to visit though,as limited time between demonstrations.
Cheers Colin.
Thanks Colin, I would love to meet him, you are a lucky guy, Sam has such a wealth of experience and talent.
Thanks for your support.
Take care
Mike
G'day Mike thanks that is the best video on NRS I've seen.
Thank you Ray, much appreciated
Take care
Mike
Great video again I will give it a go thanks ,have a great Christmas. Mark
mark lawson Thanks Mark
Merry Christmas
Mike
Mike ....... Excellent videos. Thank you for the series.
Thanks Mike, my pleasure, and your support is much appreciated.
Take care
Mike
Many great tips Mike I will have to do that to one of my flat scrapers
Thanks Mike
Albert
Albert Furtado Thanks Albert, they really do leave a great finish.
Cheers
Mike
That's really impressive Mike. Many thanks, I'm going to give this a try.
Thanks Mark, I don't think you'll be disappointed :)
Take care
Mike
great video Mike- extremely helpful--can't wait to give it a go!
Thanks Rick, appreciate your kind comment.
Take care
Mike
well did not take you long to get to the grinder ea.you ground nearly all them :-) the best thing about this scraper is the finish cut of it is so good and for any beginner turners especially turner like me it is not hard to handle:--) i use it when needed whatever tool works..
Great video Mike very well presented
All the best Robbie
Thanks Robbie, I'm so glad I took your advice, didn't think I'd be so impressed with it. It really does a great job - just like you really ;)
Thanks again, and take care
Mike
Thanks Mike for the explanation and demo. I will have to give it a try my friend.
+rwr170
My pleasure, thanks for watching.
Cheers
Mike
Nice... This is a technique I've heard of, but never really knew anything about... I'll definitely have to explore it. I'm glad you posted this video, good job Mike! :)
Have a good one my friend, Kevin
Thanks Kevin, I'm still experimenting, and there have been some very helpful and interesting comments, to learn from. thanks for your support mate, I appreciate it.
Take care
Mike
Excellent, thank you for sharing. I will regrinding my scrapers.
Thanks John, don't forget very light passes :)
Cheers
Mike
Really great video Mike! I've tried it before but never did get the hang of it, now I have a much clearer idea on how to work with it :) Thanks mate for another awesome video .. have a good one // Kenneth
Thank you Kenneth, I appreciate it mate, glad you found it useful. Give it another go, and let me know how you get on.
Take care
Mike
Mike, brilliant. I need to go buy some new scrapers (only have a small round nose now) and give this a go... I can certainly see the benefit. I tend to have a lot of sanding to get rid of tool marks (but I'm getting better), Thanks again.
Thanks Jim, I think you'll find it a good addition to your armoury.
Take care
Mike
Hey Mike, just want to say what a great series this is, before you finish your beginners guides can you include the Carbide tools as well please.
Hello Mike: thanks for your videos esp. this one. Learned a lot !
+Dieter Lutter
Thanks Dieter , much appreciated.
Cheers
Mike
***** Thanks Christian, I just finish turned a punky Ash bowl today, and used the NRS with great results.
Take care
Mike
Thanks Mike. I really like that grind. Bob
Pleasure Bob, I'm really happy with it.
Cheers
Mike
Mike another great well explained video.
I hate sanding and anytime I can start my sanding at 220 grit the happier I am lol.
I thought you would like the result of the negative grind that's why I suggested it to you oh that and you have more subscribers than I do plus for now I'm lathe less as I'm relocating my business back to Australia so I couldn't do the video on it.
Once again another job well done my friend in wood turning.
Hi Russ, I am well impressed, still needs a bit of tinkering, but a great bit of kit. Thanks very much for the suggestion, I am very grateful. Hope all goes well with the relocation.
Take care
Mike
Mike I'm all settled in, now all I have to do is start getting the new machinery for the shop
Russ Barber That's great news Russ, keep us informed mate.
Take care
Mike
Thanks Mike - great Demo + positive result - will try it
+Ray Smith
Thanks Ray
Cheers
Mike
Another really good video Mike, thanks.
Thanks, I'm glad you think so, and thanks for your support too.
Cheers
Mike
Great video Mike I am still lacking a good high speed m2 steel HD bowl scraper and I need to get one and do this to it. Looks like it works well.
Thanks Erik, I truly think you'll be well impressed with it, especially with your bowl turning skills. thanks for watching my friend.
Take care
Mike
Thanks Mike. This is information I need right now. I am turning some very dry maple into a SW indian basket shape and the inside is very difficult. this should help me out.
Pleasure Walt, hope it helps you with the project your doing.
Take care
Mike
Thanks for exploring the negative rake scraper. As a beginner in bowl turning I would like to use a scraper that is less intimidating and easir to control. I will add a negative rake scraper to my lathe tools.
Let me know how you find it Jerry and thanks for watching.
Mike, greate video well done. One suggestion, I have found that with all my scrapers after the initial trip to the grinder I can refresh the edge or wire with a trip across my burnishing post a bunch of times before I have to regrind, you may want to try that and save the steel of your scrappers.
Lawrence Tomlinson Thanks for the tip Lawrence, I tend to use a diamond credit card hone from Trend to touch up the edge, it works great for all turning tools, and saves both time and steel, I agree my friend. Thanks for watching and commenting, I really appreciate it.
Take care
Mike
Approaching the work like a gouge. Good vid!
Thank you, glad you liked it.
Take care
Mike
Great guide Mike. Off to the grinder I go.
Alan Biddulph Thanks Alan LOL, let me know if you would, what you think, when you've had a chance to try it out.
Take care
Mike
Great video Mike Thanks I will be giving it a go
Thank you Michael, let me know what you think.
Cheers
Mike
I have been trying to get back to turning after a long lay off. I think you helped me with my scraper. My bowl ended up with grooves in it after using the scraper. I think my problem was coming off the grinder and dipping the scraper too low. The scraper bur was cutting grooves. Watching you as you rubbed the bevel and slowly lifted the handle to start the cut. Guess I forgot the ABC's. Anchor, bevel and cut.
Glad you found the video useful and thanks for watching.
Great Video for beginners. Thanks For the Info.
ApexTools Thanks for watching
Really enjoyed the video be blessed and keep up the hard work
Glad you enjoyed it, and thanks for watching.
Cheers
Mike
Thank you Mike. Can you grind a bedan to 70/30?
it is very useful and teach me a lot keep it up
Hi mike,thank you for the good tips i will have a go all the best john.
Thanks John, and my pleasure, they do give a really good finish.
Cheers
Mike
I do not speak English. but your show is excellent!
Thanks Mike!
Hug!
Thank you Jose, your support is appreciated.
Take care
Mike
I love your videos. I will be making one of these. Thanks Mike
Thanks Steve, let me know what you think.
Take care, and thanks for watching too.
Mike
Great job Mike. Thanks
Thanks Steve.
Cheers
Mike
Great and very explainatory video.
I would like to ask you , sometimes i use my skew as a NR scraper and it works fine , does it make sense to grind my negative rake scrapers in such an angle?
Thank you Antonis. I am not evading the question, but I honestly believe that we should experiment, and decide on what works best. You know the old saying " Ask 10 turners a question and you will get 11 different answers" ;)
Take care
Mike
It looks a great finish without sanding
thanks
+icespeckledhens
Thank you. They do leave a good finish on most woods.
Cheers
Mike
Once again, Mike very nice job. I have never used a negative rake scraper, but I'll start just as soon as I can grind one. Have you ever done a video on your grinding procedures? If so, I missed it and think it would be a great help. Thanks again.
Thanks Winston, I did one a while ago, here's the link
Wood Turning - Sharpening your Tools
Hope it's of some use.
take care
Mike
Hi Mike! That's really interesting, first time I see this! How do you compare the time between sharpening in the normal vs. the negative rake scrapers? Best regards, Daniel
Hi Daniel, they do need sharpening/honing more frequently than a standard grind scraper, but give a far superior finish, in my opinion. They are primarily for a shear scraping cut, as opposed to normal scraping duties.
Thanks for watching, and commenting.
Take care
Mike
Do you have any videos on grinding the negative rake scraper? What I am used to is the scraper that came with a bevel and I blacken it with a marker and rub the wheel till I get a mark on the bevel from top to bottom. I have never started with square stock. How do you set that 30 degree gangle to begin with? Enjoying your series.
I start with an eyeball angle to the one I want then use a protractor to fine tune the platform. Cheers. Mike
my favorites are the same as tom cleveland.all best teachers! thanks mike
Thank you Benja.
Hey Mikey!
I have never tried that technique before but I'm sure I will be at the grinder tomorrow. It looks very impressive or as I like to say slicker than snot on a doorknob! I'm sure I can speak for the rest of us when I say thank you and job well done.
Oh BTW I will be heading to the post office Monday to send you some walnut I rescued off of my fireplace wood pile, I think I have some small burls I can fit in the box also. I will let you know what all I find tomorrow,
Thanks again matey
Thank you Tom, I'm sure you'll like it, once you've played around with it a bit. Also, that's very kind of you to consider sending me some of your firewood, as the summers get quite chilly over here ;)
Snot on a doorknob.......great saying BTW.
Take care
Mike
Mike Waldt Hey that was my walnut! Oh wait its on the shelf. I'll see if Tom wants to mail that too. Great video and I am definitely going to try that.
Kevin Denna-Lucas Make sure you never tell him about all the walnut burl we have kevin!
Kevin Denna-Lucas lol Kevin....and thanks mate. You won't regret giving the grind a try.
Take care
Mike
Tom Wilcox Don't believe you Tom Tom ;)
Hello Mike, my name is Phil and have just about worn out your beginners video's....thank you for helping.
I saw you video on scrapers and decided to buy a 1/2" scraper and wonder if you suggest making a negative scraper out of it? Phil
Hi Phil I really am happy to hear that you find the videos helpful. Personally I would but at least a relief bevel on your new scraper, but that's just my personal opinion. Try it without and see how you go 🙂
Each guide just gets better, you are doing so well at this. I know it is very time consuming doing the video and you only wish to do one more on the dreaded skew, a very scary tool for a beginner. It would be great if you had time to finish the series at number 10 with finishes, very apt, also with what woods are OK to use. I only ask this as a beginner because there does not seem to be too much info around about what may be poisonous or unfriendly to turn. So it could be on what to start with and what to finish with in turning.
I only have a few basic tools so if I was to purchase one scraper that I can use for most things what would you suggest? And the best way to measure these angles is with what?
Thank you again
Julie
Thank you Julie, I'm really happy that you find them useful. Regarding "safe" wood to work with, it's a minefield, as people have different reactions to different woods. My advice is always wear the best filter system that you can afford, that way you hopefully will get no bad reactions at all, and if it's a concern look up the individual wood you intend to turn, and see what information you can find on it. I am no "expert" on finish types, as I mainly use wax to finish my work, as I am not a "deep" gloss person, I prefer a deep "glow". I did a video on my preferred finish a while a go here is the link :
Wood Turning - A Simple Wax Finish
My advice would be to get a round nose scraper, as that is a good all round workhorse.
I use a metal protrctor like this one :
www.ebay.co.uk/itm/Protractor-Angle-Finder-Arm-Measuring-Round-Head-Stainless-Steel-General-Tool-02-/400523322578
Hope this answers your queries adequately.
Thanks for your support and take care
Mike
Hello again Mike, again a brilliantly done video. You may not consider yourself a professional wood turner, but you are most certainly a professional teacher of the craft. I appreciate the 8 tutorials and hope you continue with more. As I told you previously, new to the turning world and love it and your lectures have been invaluable. Thanks and as I am also a new subscriber to your channel, was wondering if you have a site that shows off some of the items you have finished?? Thanks and again, keep on keeping on......Cheers from Todd in Connecticut!!! Good Health to you Mike.
Todd Richardello Hi Todd and thanks for your very kind words and continued support. If you want to get "bord", you can look at some of my pieces on my Facebook page in albums.....but drink lots of strong coffee before you start ;).
Take care
Mike
PS - Thanks for the sub too.
Hi Mike, just wanted to say a huge thanks for all your efforts. I'm new to woodturning and have found your videos very informative and helpful. Certainly I wouldn't have progressed as far as I have in such a short time without them to refer to. Can I ask if you can share a link to where you got your sanding arbors from that you mentioned in one of your videos? Thanks again, Simon.
Hi Simon, thanks for your kind words, and support. The link to Cobb's Tools is :
stores.ebay.co.uk/cobbs-tools-12
Take care
Mike
Really liked this one also,going to put that 30° angle on a cheep harbor freight scraper.are you saying to also put the negative rate on the tool.would you say its a lot safer,so you don't have to worry about a catch.and how do you use the diamond scraper? That tool is pointed and sharp and scares me half to death.
The 30/30 grind is a lot more user friendly in my opinion. The spearpoint tool is one I've never used but there should be some videos on CZcams that may be helpful. Cheers. Mike
Hi Mike, another very informative video, thank you for sharing. Would I be right in thinking that with the upper bevel, there is less likelihood of a catch, and if there was one, it would not be as severe as the tool would 'clear' the wood quicker after the initial catch?
At a recent pro demonstration, I was advised to always present a scraper at 45 degrees! rather than flat! to assist in the avoidance of a catch. You have not done this, and I am wondering if it is because the double bevel helps. Sorry if this is a dumb question, but I am still in the early learning stages on the lathe.
Thank you once again, Clive
Hi Clive, I have found that the double bevel is much less likely to cause a catch as you suggested. I would totally agree with the 45° recommendation - for a standard grind single bevel scraper, but with the negative rake scraper you are lowering the tool rest and lifting the handle to commence the cut NOT lifting the rest and lowering the handle as you would with a normal single bevel scraper. Not very well explained, but i hope you get what I'm trying to say....:)
Take care, and thanks for your support
Mike
Dear Mike,
Appreciate your video on NRSs. I do have question:
Cinda Droza and others recommend a combined degree of angle of 60 to 70 with identical grinds on both sides. I wonder if you could comment on why you chose the grind(s) which you did. Getting ready to grind my scrapers and still trying to decide what grinds to use.
Dan
Hi Dan, since this video, I too have experimented with various angles...and you know what...they all work really well....so I guess it's down to personal preference. One thing I truly believe...whatever works for YOU...is the right :)
Cheers
Mike