Wire wrap tutorial, Lilibet.

Hello and welcome to my latest tutorial.
For the small stone wrap please check out this tutorial...
• Wire wrap pendant tuto...
To make this pendant/earrings, you will need -
• 0.8mm wire (20g), 3 x 6"" (15cm) (double wire amounts for earrings).
• 0.315mm weaving wire (28g) 100cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer)
• cabochon, mine is 13mm by 10mm (you can use a similar size, just remember to adjust wire length and weave repeats accordingly)
• beads, a selection of small beads, mine are 4mm, 3mm and 2.5mm. Again you can use similar sizes.
• Jump rings and ear wires for earrings, 8mm outside measurement (or whatever size you have handy)
I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Prestige flat-nose nylon jaw pliers
• Beadsmith bail pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)
My Etsy shop - www.kellyjones...
Facebook - / kellyjjewellery
IG - kellyjjewellery
Thanks for watching x
Music is free from CZcams;
Invisible Beauty - Aakask Gandhi
©2023 Kelly Jones Jewellery All Rights Reserved
Please do not copy or share this content!
This content is created for me (Kelly Jones Jewellery) to promote my tutorials.
Do not share or reproduce this content in any format.
Thank you!

[@Connie-pj9ej]

I always learn so much from you every tutorial. Thank you so much Kelly.

[@KellyJonesJewellery]

Oh thank You so much 💕💕

[@annh3599]

Thank you, Kelly! These are beautiful!

[@KellyJonesJewellery]

Oh thank You! 💕

[@edithkurashige1483]

So precious !!! ❤ Thank you for share 🙏🙏🙏

[@KellyJonesJewellery]

Oh thank You!! 💕

[@lisalakes6364]

I love this little beauty!! Thank you!!

[@KellyJonesJewellery]

Oh thanks so much 😁

[@piafinch7537]

These are absolutely stunning Kelly. Can’t wait to give these a try 💜

[@KellyJonesJewellery]

Oh great, thank you 💕

[@sonyagower1720]

Thank you for the Share. The Bail is adorable. I may incorporate that bail in future pieces

[@KellyJonesJewellery]

Thank you, have fun 💕

[@gailchambers7220]

Kelly, You amaze me. And it's funny because we use round wire and think alike, too. Love your creative work!!! May use this one...hugs!

[@KellyJonesJewellery]

Oo fantastic, thank you so much, Gail 💕 hope all is well with you ❤️

[@mcavolt]

You always have great tutorials thank you.

[@KellyJonesJewellery]

Oh thank you 💕

[@teresafowler1398]

Happy Belated Birthday, thank you for and awesome tutorial as always!! Beautiful design

[@KellyJonesJewellery]

Thank you! 😊

[@carolynmozzone412]

I so enjoy watching your videos! I’m still very much an amateur 😂

[@KellyJonesJewellery]

Oh thank you 💕

[@raisakuperman1760]

Thank you Kelly ❤ great as always!

[@KellyJonesJewellery]

Thanks so much 💕

[@907Cher]

Just adorable 😍

[@KellyJonesJewellery]

Thank you 💕🌹

[@elbanegron8296]

When I see your labor, is like MAGIC in your hands, thank you.

[@KellyJonesJewellery]

Wow, thank you so much 💕

[@pathubbard6934]

So beautiful

[@KellyJonesJewellery]

Thank you so much 💕

[@Connie-pj9ej]

Love it as always

[@KellyJonesJewellery]

Thank you so very much 💕

[@patticakes838]

Beautiful.

[@KellyJonesJewellery]

Thank you!💕

[@traceym8475]

Always beautiful! Just wanted to let you know that you can get double sided basting tape that comes off of the cabs quite easily but helps it to stay in place as you are wrapping the wires around. (Put tape on stone and the tape to table or paper, etc.) I usually use 1/4 or 1/8 of an inch wide. (6.35 or 3.175 mm) it works great!

[@KellyJonesJewellery]

Ooo ok 👍 thanks

[@lesleyhenshaw2878]

Thank you Kelly, the pendants are beautiful, and also make gorgeous earrings x❤

[@KellyJonesJewellery]

Thanks so much x 💕

[@angelashaw5731]

Such a gorgeous design Kelly - thanks so much for sharing! 😊💗🌿🕊️

[@KellyJonesJewellery]

Oh thank you!

[@sherbiseerattan3901]

Awesome

[@KellyJonesJewellery]

Thanks so much 💕💕

[@CASHayward]

I'm SOOOOO SORRYYYYYYY!! HAPPY BELATED BIRTHDAY MS. KELLY!!! 🧁🍰🎂🥂💜🐾🤟
I SOOOOOO L💜VE watching your tutorials!! Thank you SOOOOO VERY MUCH!! Could I make this with an oval cabochon, [& IF SO, what changes would I need to make, if any at all]? Thank you again!! This is so, SOOOOOOOOO GORGEOUS!!!
💜🤟🐾🤙🏻🐾🐶🐺🤟💜
Aloha & MAHALO NUI LOA!!
P.S. SORRY FOR SAYING "SOOOOO" TOO MUCH!!😪

[@KellyJonesJewellery]

Haha, thank you so much. Yes you can use an oval, made more or less the same way. ❤️ 💕 Thank you, I had a lovely birthday 😁

[@doracarrington9219]

Wow, what an elegant design - love it !! Could I ask where you get your copper beads from please? I am in the UK. Many thanks for sharing! ❤

[@KellyJonesJewellery]

Etsy, search 3mm copper uncoated beads and check the hole size is 1mm or there abouts 👍

[@KellyJonesJewellery]

And thank you 💕