3 Pro Tips For Using The RLS / Zoomlock HVAC Press / CrimpTool
Vložit
- čas přidán 31. 01. 2023
- All my favorite HVAC tools: www.amazon.com/shop/thediyhva...
RLS Crimp Tool: www.trutechtools.com/klauke-1...
(Use discount code QUALITYHVAC at checkout for 8% off!)
IF YOU ARE IN NEED OF GUIDANCE WITH YOUR HVAC SYSTEM, whether it is diagnosing a bad part, replacing your system, or help with sizing, check out our membership program here: / diyhvacguy
For a small monthly fee of $25, you will get assistance from myself when it comes to your hvac needs, whether it's sizing, diagnosing, or locating the correct equipment.
⚠️ Disclaimer:
This video is for educational purposes. Any and all HVAC repair work is done at your own risk. The DIY HVAC Guy channel is not responsible for any possible damages or injuries caused by the use or misuse of the provided information.
Hi all. Thanks DIY Guy.
That's a cool tool.
Enjoy the ride.
Excellent video man you did a great job. ❤
More fun stuff, love it.
In what scenario would the 19kv tool lack that of the 32kv tool?
Can you use the short throw press tool with rls fittings?
Hey have you any videos showing generator troubleshooting? Been having a repeated issue with a 7k watt propane generator. SOS
Great tutorial! Little off topic here, but i noticed my main electric lines going from the wall switch to my furnace are 14AWG. Is there any problem with switching it to 12AWG ? It is on a 20amp breaker and it has 12AWG up until it goes from the switch to the furnace. The blower motor pulls 14 amps when it first starts up and i think that is close to maxing out the 14AWG...? Thanks for all the great videos!!!
No problem at all!
This would be good if you have tons of joints to do, but for installing A/C or Heat Pump where you have like 4 or so joints I'd just stick with torch. Plus the tools is big bucks and so are the fittings. Like $14 for 1 elbow vs a couple bucks for a sweat fitting.
Come on man get with the times and embrace new technology, you only live once. What’s $4500 dollars?
@@waynemiles7027is that the cost of this set up ?
Is there RLS tool that is not battery operated (manual)? Something cheaper? Will the IWS-1632AF CRIMP work for HVAC? Thank you
Great channel do they sell zoomlock with flare ends ?
Yes they do.
This is an expensive tool. Is there an alternate tool even a manual press that's less expensive?