Thank you very much for your kindness, Leon. I have made Previous versions of your Clocks . I will definitely build this new project. Keep going My friend...
Fantastic design, I have all parts needed, thinking about scaling this to 70-75% so it's not wider than 35-40cm, with the same led strip that would mean 2 leds per segment
Gaaf ik ben al even op zoek naar een diy scoreboard liefst tegelijk met countdown voor de korfbal van mijn dochter. Denk je dat het overdag met de leds ook een beetje te zien is?
Hello. I have one question. Where i find the app 7 SEGMENT CLOCK? I have a clock, works fine, but i don't find the app for my Phone and i don't change color clock. Thank you.
Hallo Leon, Fantastisch concept. Ben er niet direct mee begonnen maar door het een en ander aan zoekwerk te doen en wat te pioneren kwam ik weer terug bij jouw ontwerp. Het is gelukt! Echter enige vraag: Is het mogelijk om de volgorde van de digits aan te passen? De ledstrips zijn in een andere volgorde geplaatst daardoor krijg ik de cijfers er niet goed op.
I love this project, I can't wait to build my own, especially now that I got my 3D printer working! Have you tried integrating something like this into Home Assistant? I currently have a 7 segment (small/tiny) display that is updated via MQTT via Home Assistant. I would like to make a much bigger/larger display that can display the same stuff as the smaller version. Right now it toggles between clock/temp/humidity/cgm data. CGM is my son's blood glucose reading, he is diabetic. MQTT addition to your project would be insane. That would allow you to display anything you want, and not need a RTC circuit added to it.
Hoi Leon, nog eens die lastige met die domme vragen haha.... Welke wemos is het die je gebruikt hebt de 4MB? Is het heel lastig om de tijd van internet af te halen en het script aan te passen daarvoor. Heb net een klokje uit china omgebouwd die had keuren met de leds. Wel een werk geweest gezien ik nog niks met die leds heb gedaan. En alles wat mis kon gaan ging natuurlijk ook mis. Maar uiteindelijk werkt het tijd haald hij gelijk van het net en noit meer iets instellen. Alleen hij geeft alleen de tijd verder niks. Geen app of temperatuur of wat dan ook. Groeten, Andre
Leon...I'm a novice at this but am fascinated at the possibilities. Is there an email address that I might contact you at with questions? Thanks in advance. Scott
¡¡¡Todos tus trabajos me parecen fantásticos!!! Enhorabuena Eres un gran diseñador ¿ con que impresora 3d realizas tus trabajos ? Me gustaría mucho que nos enseñaras tu taller
Hey, I just wanted to say that it's a wonderful project, and I intend to do it for a friend. I was wondering if I can make it smaller, using 1 led per segment, and if you could add a beeper for the alarm and other stuff? And can it be used just plug and play without the need of internet? Can it get the temperature if we add a sensor and all these? And thank you for that project!
Leon, thanks for sharing this and the 3D clock projects. Quick question though, is there another way of entering WiFi username / password instead of coding it into the ESP? I'm printing one for a neighbor who is a little blind. His son doesn't want to give out WiFi info to me ... Any thoughts?
@@LeonvandenBeukel thanks for the reply. i will look for the code. i need enough to count 1 billion, dunno if that is possible, any input or suggestions ?
Hoi Leon, Heb je ooit overwogen voor dit soort projecten een ESP01 te gebruiken? Zijn stuk kleiner en inplaats van de RtcDS3231 de tijd van het net af te halen. Zag iemand die dit had gedaan lijkt me zo niet verkeerd. En wat ik me nog afvroeg vindt niet echt een duidelijk antwoord maar kun je ook gewone led's nemen of moeten het echt WS2812B zijn? Zou zo als ik heb gezien eigenlijk moeten kunnen maar zou het niet 100% zeker weten. Wellicht heb je hier wel eens mee getest of het kan niet veel mogelijkheden maar is ook niet altijd nodig lijkt me. En wellicht een stul goedkoper in matriaalkosten. Groeten, Andre
Super projet , j’ai fait la version v1 de l’horloge avec une seule led par segment je suppose qu’avec les trois led elle est plus lumineuse la journée ?? en tout cas merci pour votre travail et bravo 👍🏻. Ps un tuto pour coder l’ESP8266 ça serait cool.
hello, i like the design of the clock but i would like to keep just the countdown part of the code. Can someone send me the countdown part of the code pls?
@leonvandenbeukel It looks like you have a jumper cable going from one side of the clock to the other..is that the case. If so what pics are they connecting. Thanks
great job leon!! I have a question about the code. Everything is running perfectly. But I want to show each led with its unique color. When I energize the system, d1 mini should started with this function. Any suggestion?
I followed all steps carefully, i uploaded ino and gzipped data files and uploaded using the tool. I got the server working (but no images) and connect to the clock ap. I see all the html app on my mobile but it does not work when touching trying to change colours, etc. The is no graphics in the html app. Does anyone have a clue whats wrong? Any suggestions would be appreciated it. Thank you
at 5:08 a resistor appears.. looks to be 6 ohms, but very hard to tell, maybe 10 ohms. I have seen on other clocks, put a 10 ohm resistor inline on the data line. Anyways thanks for the project!
I want to thank you for all the efforts you put into designing and building this clock project and being very magnanimous in releasing the FreeCAD and Arduino codes to all. I am really looking forward to building this project and using the FreeCAD file to learn how to do CAD. I do have one question for you though, how difficult will it be to add the ability to connect to WIFI through the phone rather than hardcoding WIFI credentials? Once again, thank you very much. By the way, do you have Patron website where one can donate to your projects?
The clock is awesome!!! I built myself similar one but insted of 21 leds per number im using 140 I was wondering could I use your app with my clock? The biggest problem that i see is that my strips are not in a nice order like yours are and on top of that each nuber is in a diferent order (i know its a mess...) case 0: startindex = 0; //can i replace the "startindex = 0;" with a long if statment that instructs how to make the selected symbol if (number==0){ LEDs[1] = color; //this probobly isnt how you set color LEDs[2] = color; LEDs[3] = color; . . . else if (number==1){ //Would that work? sry for making this massive comment i just dont have ESP yet and was wonderin is it worth buying it
I tried to figure this one out, with the lack of documentation on it all. But run into a problem, with right digit, only bottom and bottom right segment light up green, and 1 orange LED. Have been trying to locate anything in the code, but without luck. Hope anyone, can share some light in this pretty good project, but documentation on it is way off :/
HI Leon..you project looks very nice..thanks for the effort and sharing it...can you please let me know the plastic material for black and white used..i am very new to 3d printing..thanks
This project looks so good! The best so far out there. But I am experiencing a huge issue. The code is restarting after connecting to the internet. So I cant access the web interface. What am I doing wrong?
You must create a file "Credentials.h" in the same folder as the sketch, inside this file you must add the following: #define SID "Put_your_ssid" #define PW "Put_your_password" Keep the quotes. In the sketch look for the line: const char * ssid = UN; and change to: const char * ssid = SID;
@@Vandeko_bass Thank you my friend. But even though I do exactly what they say, I still get a file error. I have been dealing with this for about 2 weeks. I can load the "data" folder into the card, but I can't load the code, unfortunately...
I'd started something similar to this along the same idea and same components(mine has 3D printed "segments and dots" and body made of laser cut ply, but it is still a work in progress), inspired by your previous version/project. ...... and... you beat me to it. BTW, is the app open/available as well?
I really like the v1 clock you made , is there any way you could scale it to use 3 led per segment so it's brighter, I like the 3d aspect of the segments, if we could transplant these electronics into the v1 model would be amazing, I would be happy to donate some funds for your time, Or maybe possible adapt the white 3d segments to this model
no entiendo esta parte , me pueden explicar por favor que me marca un error #include "Credentials.h" // Create this file in the same directory as the .ino file and add your credentials (#define SID YOURSSID and on the second line #define PW YOURPASSWORD)
Hello, i love your projects. i need help, please. My question is : if I want 3 digital clocks in my classroom ( 1. Show time, 2. Countdown timer which show time to end lesson, 3. Countdown timer which show time to end Skill station during lesson). It is possible do on 1 esp8266, or i need 2 esp for countdown timer and 1 arduino for time. I want to do the control via a written application in which both countdown timers will be controlled.
Great hours. I got them done and they are amazing. Just one question. Would it be possible in the code to set the brightness to decrease to 30%, for example, at a certain hour? Thanks
You should be able to do that. I have similar idea in mind. Mean obviously if you are used to dark room when sleeping the less light the better so less brightness.
I have credentials.h error problem while compile this sketch. But I have this credential file as same folder. how can I solve this problem please help me do this project . Other process was done only this compile and upload process pending. Please help me sir.😢😢😢😢
This is indeed a cool project! When i finally buy my printer i'll print those stls myself :) What do u think about the Sidewinder X1? And don't u think, 2.5 Amps are a little too little to power 4x21 LEDs? every LED pulls 0,06amps max, so my calc says all of them pull 5.04A if all LEDs are on max brightness.
I don't know the Sidewinder X1, I have an Anet A8. I did some measurements and it didn't use that much current but it's certainly better to use a more powerfull power supply.
There are only 86 LEDs in the entire clock. if one LED consumes 0.18W (per datasheet of WS2812 @ RGB channels), it's roughly 15W or 3A at 5V (when all segments are lit up in white). But considering that you'll never light up all the LEDs in white at once, I think a 2.5A power supply is adequate. A 3A power supply will handle a score of 88 to 88 if both teams are in white light.
Does anyone know what happened? My ledstrip (WS2812B) is working well on a other arduino board. The different cases (clock, count-down, score board) are oke as well. But when I change the color, it isn't the color which I've chosen. Sometimes there are a few more leds light up. So by startup the color is blue, but only led[0] is a sort of green. I tried to change the colororder RGB to GRB or other, but RGB is the most beautifull order (with the fewest mistakes). Is there any other thing I can do?
Hi has this clock got to be connected to wifi? I would like to build one for my workplace but there is no wifi available. Is it possible to just connect to it with a mobile phone and set the time etc
Who doesnt like a 7 segment clock? No one. Everyone loves it!!!! I dont know it just looks cool
Minute 6:14: EXACTLY why I hate flathead screws
Great vid! Thank you!
Good job Leon, I knew you would do something like this I love your works.
Great job. Love how you incorporated the countdown timer and scoreboard as well 👍
Thank you very much for your kindness, Leon. I have made Previous versions of your Clocks . I will definitely build this new project. Keep going My friend...
I have made too. But I couldn't connect Bluetooth module... Please help me...
Очень интересный проект! Отличное исполнение! Ещё бы будильник спроектировать!
Great project - the end result is fantastic!
Great Job Leon. I always love your work!
Nice job! I really want one of these for my workshop. Thanks for sharing.
This is freaking fantastic. Thank you for sharing.
This is a great project! Thanks for sharing.
Nice project , I still have your other version of clock u did before . Thank u and keep the good work
Fantastic design, I have all parts needed, thinking about scaling this to 70-75% so it's not wider than 35-40cm, with the same led strip that would mean 2 leds per segment
Excellent
It's very impressive work
Thanks
awesome work!
What app are you using in the video to control the clock?
Gaaf ik ben al even op zoek naar een diy scoreboard liefst tegelijk met countdown voor de korfbal van mijn dochter. Denk je dat het overdag met de leds ook een beetje te zien is?
Hello. I have one question. Where i find the app 7 SEGMENT CLOCK? I have a clock, works fine, but i don't find the app for my Phone and i don't change color clock. Thank you.
I made the similar version with Bluetooth , alarm, RGB rainbow mode and normal random color digits , and ldr , day of week, battery indicator etc.
Hello! How did you connect the phone to the clock to update the time and color of the LED lights?
Hola, genial tu contenido. Dónde encuentro la aplicación que usas en el celular para hacer los cambios?
What plastic was used to print the dial segments (white details)?
Hallo Leon,
Fantastisch concept. Ben er niet direct mee begonnen maar door het een en ander aan zoekwerk te doen en wat te pioneren kwam ik weer terug bij jouw ontwerp. Het is gelukt! Echter enige vraag: Is het mogelijk om de volgorde van de digits aan te passen? De ledstrips zijn in een andere volgorde geplaatst daardoor krijg ik de cijfers er niet goed op.
I would so love to have a clock like that. I’d like to actually MAKE one!
What Model of printer is that and what material is utilized? I want to get one.
I love this project, I can't wait to build my own, especially now that I got my 3D printer working! Have you tried integrating something like this into Home Assistant? I currently have a 7 segment (small/tiny) display that is updated via MQTT via Home Assistant. I would like to make a much bigger/larger display that can display the same stuff as the smaller version. Right now it toggles between clock/temp/humidity/cgm data. CGM is my son's blood glucose reading, he is diabetic. MQTT addition to your project would be insane. That would allow you to display anything you want, and not need a RTC circuit added to it.
can i get scematic and code mster for your project?
can i get scematic and code mster for your project?
Hoi Leon, nog eens die lastige met die domme vragen haha.... Welke wemos is het die je gebruikt hebt de 4MB? Is het heel lastig om de tijd van internet af te halen en het script aan te passen daarvoor. Heb net een klokje uit china omgebouwd die had keuren met de leds. Wel een werk geweest gezien ik nog niks met die leds heb gedaan. En alles wat mis kon gaan ging natuurlijk ook mis. Maar uiteindelijk werkt het tijd haald hij gelijk van het net en noit meer iets instellen. Alleen hij geeft alleen de tijd verder niks. Geen app of temperatuur of wat dan ook. Groeten, Andre
How can find mobile app
Good morning, as it happens, I am quite new to electronics. I would need to see in more detail how and where the component welds are made.
It's perfect project. Where can I find 7 segment clock app?
I can't find it on play store
Leon...I'm a novice at this but am fascinated at the possibilities. Is there an email address that I might contact you at with questions? Thanks in advance. Scott
Nice
Excellent... But which app u used?
Het jy abs gebruik? Did you print with abs?
¡¡¡Todos tus trabajos me parecen fantásticos!!!
Enhorabuena
Eres un gran diseñador
¿ con que impresora 3d realizas tus trabajos ?
Me gustaría mucho que nos enseñaras tu taller
How can i change the code to display 0 on first digit(for eg 7:56 to 07:56).
Hey, I just wanted to say that it's a wonderful project, and I intend to do it for a friend. I was wondering if I can make it smaller, using 1 led per segment, and if you could add a beeper for the alarm and other stuff? And can it be used just plug and play without the need of internet? Can it get the temperature if we add a sensor and all these? And thank you for that project!
Very cool, thank you very much for the script. It would be perfect if you had an Mqtt connection to change the colors, timers, etc.
Leon, thanks for sharing this and the 3D clock projects. Quick question though, is there another way of entering WiFi username / password instead of coding it into the ESP? I'm printing one for a neighbor who is a little blind. His son doesn't want to give out WiFi info to me ... Any thoughts?
You can turn the ESP into an access point which requires you to connect your phone to the ESP.
Verry Cool... good job....👍🏻👍🏻👍🏻
Bonjour, y a-t-il une application Bluetooth chez Apple store pour gérer l'horloge et ses fonctions
I have tried ti made the clock, but Is not visibile in outdoor with the sub, suggestion?
Go indoors.
heb je de hoeveelheden die je van elk onderdeel nodig hebt om te printen?
i have a question, can i build this as you did but make it an up counter?
Yes that's possible, but you have to make some changes to the code of course
@@LeonvandenBeukel thanks for the reply. i will look for the code. i need enough to count 1 billion, dunno if that is possible, any input or suggestions ?
Hoi Leon, Heb je ooit overwogen voor dit soort projecten een ESP01 te gebruiken? Zijn stuk kleiner en inplaats van de RtcDS3231 de tijd van het net af te halen. Zag iemand die dit had gedaan lijkt me zo niet verkeerd. En wat ik me nog afvroeg vindt niet echt een duidelijk antwoord maar kun je ook gewone led's nemen of moeten het echt WS2812B zijn? Zou zo als ik heb gezien eigenlijk moeten kunnen maar zou het niet 100% zeker weten. Wellicht heb je hier wel eens mee getest of het kan niet veel mogelijkheden maar is ook niet altijd nodig lijkt me. En wellicht een stul goedkoper in matriaalkosten. Groeten, Andre
Super projet , j’ai fait la version v1 de l’horloge avec une seule led par segment je suppose qu’avec les trois led elle est plus lumineuse la journée ?? en tout cas merci pour votre travail et bravo 👍🏻. Ps un tuto pour coder l’ESP8266 ça serait cool.
It is certainly much brighter
hello, i like the design of the clock but i would like to keep just the countdown part of the code.
Can someone send me the countdown part of the code pls?
@leonvandenbeukel It looks like you have a jumper cable going from one side of the clock to the other..is that the case. If so what pics are they connecting. Thanks
Very nice and warm project. Please can you do video on petrol station 7 segment price display with led pixel?
Merhaba Leon. Herhangi bir ESP8266 modülünü kullanabilir miyiz? Yoksa sadece bu modeli mi kullanmalıyız?
What app is being used?
great job leon!! I have a question about the code. Everything is running perfectly. But I want to show each led with its unique color. When I energize the system, d1 mini should started with this function. Any suggestion?
I followed all steps carefully, i uploaded ino and gzipped data files and uploaded using the tool. I got the server working (but no images) and connect to the clock ap. I see all the html app on my mobile but it does not work when touching trying to change colours, etc. The is no graphics in the html app. Does anyone have a clue whats wrong? Any suggestions would be appreciated it. Thank you
at 5:08 a resistor appears.. looks to be 6 ohms, but very hard to tell, maybe 10 ohms. I have seen on other clocks, put a 10 ohm resistor inline on the data line. Anyways thanks for the project!
I did not use the resistor and it works just fine.
Excellent
It would be nice to have a more detailed video for those who don't understand like me
Hi Leon, on wich Pins on the ESP8266 are the RTC Pins?
SCL to D1
SDA to D2
Please give me a solution,compile succsess but can not upload to rap 8266
I want to thank you for all the efforts you put into designing and building this clock project and being very magnanimous in releasing the FreeCAD and Arduino codes to all. I am really looking forward to building this project and using the FreeCAD file to learn how to do CAD. I do have one question for you though, how difficult will it be to add the ability to connect to WIFI through the phone rather than hardcoding WIFI credentials? Once again, thank you very much. By the way, do you have Patron website where one can donate to your projects?
Thanks a lot for your design! How many botton layer did you use for print the segments!?
Great work, why do you need a 5v breakout board and the rtc couldn't it be done without them?
Thanks. You need a breakout board because you cannot use the 5V from the ESP because it draws to much current.
Very cool project. Can you add NTP synchronization instead of rtc module
The clock is awesome!!!
I built myself similar one but insted of 21 leds per number im using 140
I was wondering could I use your app with my clock? The biggest problem that i see is that my strips are not in a nice order like yours are and on top of that each nuber is in a diferent order (i know its a mess...)
case 0:
startindex = 0;
//can i replace the "startindex = 0;" with a long if statment that instructs how to make the selected symbol
if (number==0){
LEDs[1] = color; //this probobly isnt how you set color
LEDs[2] = color;
LEDs[3] = color;
.
.
.
else if (number==1){
//Would that work? sry for making this massive comment i just dont have ESP yet and was wonderin is it worth buying it
can you use 30leds/m strip and just change the NUM_LEDS 86 to a smaller amount?
Error compilling for board LOLIN(WEMos)D1 R1 mini ??
Big like !
Hello
Error. 'D5' was not declared in this scope
Please help
Thanks
Can someone tell me what app they use to control it?
I want to do it with Arduino, but I will use 2 LEDs in each segment. How should the code change be?
I tried to figure this one out, with the lack of documentation on it all.
But run into a problem, with right digit, only bottom and bottom right segment light up green, and 1 orange LED.
Have been trying to locate anything in the code, but without luck.
Hope anyone, can share some light in this pretty good project, but documentation on it is way off :/
Good job
बहुत अच्छी
HI Leon..you project looks very nice..thanks for the effort and sharing it...can you please let me know the plastic material for black and white used..i am very new to 3d printing..thanks
This project looks so good! The best so far out there. But I am experiencing a huge issue. The code is restarting after connecting to the internet. So I cant access the web interface. What am I doing wrong?
DONDE CONSIGO LA APP
"Credentials.h: No such file or directory" I get an error like. How Can I Solve? Everything I did as you said?
You must create a file "Credentials.h" in the same folder as the sketch, inside this file you must add the following:
#define SID "Put_your_ssid"
#define PW "Put_your_password"
Keep the quotes.
In the sketch look for the line:
const char * ssid = UN;
and change to:
const char * ssid = SID;
@@Vandeko_bass Thank you my friend. But even though I do exactly what they say, I still get a file error. I have been dealing with this for about 2 weeks. I can load the "data" folder into the card, but I can't load the code, unfortunately...
@@Vandeko_bass lo podría explicar mejor por favor no tengo experiencia programando
Looks really good think I will have a go at making one. Will it work with Apple iOS phone.
Yes because it runs a webserver on the device.
I'd started something similar to this along the same idea and same components(mine has 3D printed "segments and dots" and body made of laser cut ply, but it is still a work in progress), inspired by your previous version/project.
...... and... you beat me to it.
BTW, is the app open/available as well?
Is it possible to make rainbow effect? I mean each segment has different color
I really like the v1 clock you made , is there any way you could scale it to use 3 led per segment so it's brighter, I like the 3d aspect of the segments, if we could transplant these electronics into the v1 model would be amazing, I would be happy to donate some funds for your time,
Or maybe possible adapt the white 3d segments to this model
no entiendo esta parte , me pueden explicar por favor que me marca un error #include "Credentials.h" // Create this file in the same directory as the .ino file and add your credentials (#define SID YOURSSID and on the second line #define PW YOURPASSWORD)
Hello friend, how to add day, date, month, in to this clock,
Hello.
Can you send me a bin file of 7-Segment-Digital-Clock-V2-master.
Please.
I can't compile it gives error
I have been able to compile the program and create the bin file.
take a look at my video description
czcams.com/video/_TDled77kRU/video.html
Hello, i love your projects. i need help, please. My question is : if I want 3 digital clocks in my classroom ( 1. Show time, 2. Countdown timer which show time to end lesson, 3. Countdown timer which show time to end Skill station during lesson). It is possible do on 1 esp8266, or i need 2 esp for countdown timer and 1 arduino for time. I want to do the control via a written application in which both countdown timers will be controlled.
Hallo Leon
Kun je ook meer led's per digit nemen
Ik wil een grotere versie maken?
Alvast bedankt
What is this message?
SPIFFS Error: esptool not found!
Great hours. I got them done and they are amazing. Just one question. Would it be possible in the code to set the brightness to decrease to 30%, for example, at a certain hour? Thanks
You should be able to do that. I have similar idea in mind. Mean obviously if you are used to dark room when sleeping the less light the better so less brightness.
I have credentials.h error problem while compile this sketch. But I have this credential file as same folder. how can I solve this problem please help me do this project . Other process was done only this compile and upload process pending. Please help me sir.😢😢😢😢
This is indeed a cool project! When i finally buy my printer i'll print those stls myself :)
What do u think about the Sidewinder X1?
And don't u think, 2.5 Amps are a little too little to power 4x21 LEDs? every LED pulls 0,06amps max, so my calc says all of them pull 5.04A if all LEDs are on max brightness.
I don't know the Sidewinder X1, I have an Anet A8. I did some measurements and it didn't use that much current but it's certainly better to use a more powerfull power supply.
There are only 86 LEDs in the entire clock. if one LED consumes 0.18W (per datasheet of WS2812 @ RGB channels), it's roughly 15W or 3A at 5V (when all segments are lit up in white). But considering that you'll never light up all the LEDs in white at once, I think a 2.5A power supply is adequate. A 3A power supply will handle a score of 88 to 88 if both teams are in white light.
Does anyone know what happened? My ledstrip (WS2812B) is working well on a other arduino board. The different cases (clock, count-down, score board) are oke as well. But when I change the color, it isn't the color which I've chosen. Sometimes there are a few more leds light up. So by startup the color is blue, but only led[0] is a sort of green.
I tried to change the colororder RGB to GRB or other, but RGB is the most beautifull order (with the fewest mistakes). Is there any other thing I can do?
Hi, I like it, do you have a bigger design ? I would like segments height about 25-30cm. Thank you
Hello, good work, where can I find the diagram for connecting the electronics Thank you
How to show humidity. Do you have a new upgrade? Thank you.
Supongo que la carga electrica es a traves del micro USB
I have "credentials. h " error comes how can I solve this problem
Hey, its possible get more info about connection, some schematic diagram? Thanks in advance
there is a picture posted by someone in a closed issue on his github page. Look at issues and you'll find it
Hi has this clock got to be connected to wifi? I would like to build one for my workplace but there is no wifi available. Is it possible to just connect to it with a mobile phone and set the time etc
It does not necessarily need to be connected to the internet, since it generates its own Wifi network
Great project bro!!! how can i add "pause/play" button to the html countown page?
Is it possible to use 1 Led/Segment instead of 3 Leds? I want to mix your older "3D Digital Clock" with this Wemos D1 Mini Method.
You need to change some of the code for that.
Hallo ich bräuchte die dateien so das ich mir die online irgendwo ausdrucken kann bzw wäre jemand bereit mir das gegen endgeld zu amchen ?