LARGE DIY 7 Segment Display Leds Digital Clock
Vložit
- čas přidán 11. 03. 2023
- Here's how you can build a 7-segment clock display with WS2812B led strips that change color if tomorrow's weather changes.
Using the ESP8266 microcontroller and a 3d printer you can use this 4 digit display to display a clock that connects to "open meteo" api website and choose the right color based on the tomorrow's forecast weather.
📌 This video is sponsored by PCBWAY
🔗 www.pcbway.com/
If you like this tutorial you could leave a comment and subscribe so you don't miss the next videos 😃👍
📫 email: boomytech@gmail.com
📌 STL Files
🔗 www.pcbway.com/project/sharep...
📌 ARDUINO IDE:
🔗 www.arduino.cc
#arduinoproject #arduino #esp32 #esp8266 #diyprojects #electronic #electronicsprojects #electronics
I have a very similar project i completed before i saw this. Very interesting how we approached it almost the same.... I have one male and one female connector on each 7 segment block (so i can connect them in sequence easily). I used clear PETG for lenses, I did not use the "dots" in each segment - I used a central ":" to show the gap between HH:MM and put the controller in there. Your connector solution of soldering onto boards is better than mine. I have no screws in anything - only clips... Thanks
Hi guys, what do you think about this project? how would you have done it? what would you have changed? let me know in the comments..😀💪🏻
Send me the code arduino
Arduino code
Need code for ESP32 with auto install like WLED web installer, I can't find on youtube & website, other have only 2 led each segment on clock
can you change out INCANDESCENT bulbs LED displays? Easily????
Very nice project!
I am a little confused. I have all the led's wired in. I have the ESP and board all set. I need to know where the wires go from the esp32 to the led's. Also where does power come in, and as well where are the short plug connectors set. If you can post on the PCB site a few more pictures that might help me out. Teriffic project.
I have that part completed. How is the board that the esp sits on wired to the led's, it is hard to tell where the g, 5v, gpio wires go to power the lights on the printed board. Also what panels get the short dupont connectors and in what order starting with the first panel. I know I might not be making ane sense but the video does not provide enough of the final wiring.
Very good project sir I need this font file??? Please
Very well done! Keep up the great work.
Very nice
bellissimo
9:31
Perfect
thanks for sharing. does its brightness high enough to be used at indoor in daytime, like badmington hall.
Complimenti per la bellissima realizzazione ✌️👏 adoro i wled , anche sul mio canale ho realizzato alcuni progetti 💪🏻👏
what font did you use for the numbers?
Howd you make the thing behind you in the beginning of the vid
Form India