03 Yamaha Big bear oil change and general maintenance - part 2

Sdílet
Vložit
  • čas přidán 12. 05. 2022

Komentáře • 5

  • @robwright4398
    @robwright4398 Před rokem

    How did you adjust it, I can’t get my hand in there to turn it?

  • @nicholaspatten5795
    @nicholaspatten5795 Před rokem

    Great video, very informative! I have the same four wheeler. It was leaking gas from the carb and wouldn't stay running at idle with/without throttle or choke so I replaced the carb and did all the maintenance you just showed while I was at it. Now my 4 wheeler will run smoothly at idle no choke but as soon as I start to hit the throttle it stalls out. This happens in neutral and in gear. Was thinking there may be some way to tune the carb but not sure and didn't see that in your video. Any thoughts on what the issue might be or insight on how to tune the carb?

    • @jlspowersportshobbies4568
      @jlspowersportshobbies4568  Před rokem

      Thanks
      If you replaced the carb with a ebay/Amazon special I could see you having running issues. As they usually don't perform well. As for tuning you can raise or lower the needle jet. That controls fuel from off idle to about 3/4 throttle. Then the main jet controls from about 3/4 to full throttle. If you have a new oem carb none of that should be needed tho.

    • @nicholaspatten5795
      @nicholaspatten5795 Před rokem

      @jlspowersportshobbies4568 It was from Amazon I did adjust the fuel needle and it is running great again. I appreciate the response. Won't be shoveling snow now! Thanks.

    • @jlspowersportshobbies4568
      @jlspowersportshobbies4568  Před rokem

      @@nicholaspatten5795 happy to hear