Video není dostupné.
Omlouváme se.
Ford TPMS Change (Tire Pressure Monitoring Sensor)
Vložit
- čas přidán 5. 10. 2023
- How to change the TPMS on a 2012 F-150. Pretty Easy job for a DIY small project!
This video covers how to diagnose which sensor is bad, how to access and replace the bad censor, how to reseat the bead on the tire and how to retrain your sensors.
#diy #ford #f-150 #tpms #howto
Link to where I purchased the sensor!
www.rockauto.c...
Please Subscribe for more videos like this!
/ @fixer2u
Socials
Facebook - www.facebook.c...
Instagram - www.instagram....
Thanks for sharing easy and simplified advice 👍🏾
You are welcome, thanks for the comment!
This is the best trick I've seen yet. Never understood why the damn thing could tell me pressure is low, but not which. Beautiful
Thank you!
I did a brake job this winter and my tire was so seized on I had to actually loosen the lugs, then go for a drive and do a couple hard stops to loose the wheel, it worked, but damn that thing almost killed me before I thought of that, it would not budge and I even had friends come try.
Harbor Freight has a cheap tire changer that has a bead breaker built in, very good tool especially with duckbill mod.
Yeah that truck has been stuck worse for sure I have had a much harder time in the past. I have seen that tite changer but I might only use it once every couple of years....
thank you for making my life so much simpler and saving me $260!!!! for the tire place to sell me 4 sensors and program them.
Glad it helped!
Very helpful
Thank you!
Thank you for your help. This helped.
You are welcome! Glad it worked!
Thanks for your video.
Treat yourself to a tire inflator with a built in gauge!!
Thank you! Funny thing is I just bought one before this video and tested it. I found that it was off by 3 psi from 2 other normal gages!
Bloody Legend mate!
Lol why is that?
People will argue about air vs dry air vs nitrogen... but the soapy water introduces more moisture than regular compressed air.
Possibly but many many tire shops use soapy water as well so.....
@@fixer2u can you let us know what its the part number i have the same issue over here.
@@jaandel1 Here is the link to where I ordered it! I will place it in the description! Thank you for the comment! www.rockauto.com/?carcode=1503273&parttype=12036
Did u have to drive car to wake up sensors before training
I did not.
Where did you get that impact socket
Amazon like 10 years ago.
Why wouldn't you show the removal & replacement of the actual part???
I tried to film it butnitbwas tight quarters. Needed both hands so you couldn't see anything anyways.
I trained My old ones NP but the new ones would accept the training .. any Ideas
I am not sure.... It is possible they changed the programming in them so you have to actually use the tool. But that is just a theory.
Tire lugnut torque is 150 lbs.
Thanks! I use a couple three uga dugas! ;)