Livewell Plumbing Installation Tutorial 2021
Vložit
- čas přidán 22. 06. 2021
- Livewell Plumbing Installation Tutorial 2021
This is a livewell plumbing video for your jon boat. This livewell plumbing tutorial should give a good look at how your livewell setup should look and work and I will attach a livewell diagram below. You have a few options from Flow-rite, as well as the ability to add a DIY livewell to your boat. This custom livewell shows the best pump for a livewell as well as how to install. Feel free to use this application in your bass boat as well.
Livewell Diagram - www.flow-rite.com/marine/fish...
Become A PATREON! - bit.ly/3jb4FgW
#projectwilson #fireantboats #tinyboatnation
-----------------------------------
Project Wilson COMPLETE PLAYLIST - • NEW Jon Boat Restorati...
FIND TINY BOAT PRODUCTS HERE : www.tbnation.net
WELDED LIVEWELL - bit.ly/34lTgEUtbn18galweldedl...
FLOW-RITE PREMIUM KIT - bit.ly/3mbbaArtbnflowritelive...
FLOW-RITE STARTER KIT - bit.ly/37HrmFCflowritestarterkit
WEATHER STRIPPING - amzn.to/3t5nWDy
__________________________________________________________
TOOLS :
RIVET TOOL - amzn.to/3eB94I0
BAN SAW - amzn.to/2PzZwVf
COMPACT CUT OFF - amzn.to/2Qy5C9b
ORBITAL SANDER - amzn.to/3vsizjw
__________________________________________________________
MY GEAR :
GOPRO HERO 9 BLK - amzn.to/3ezGjv6
GOPRO HERO 8 BLK - amzn.to/3e0Bg8a
MAIN CAMERA - amzn.to/3aORGyy
GIMBLE - amzn.to/3gOCWDB
__________________________________________________________
FIREANT BOATS SOCIAL MEDIA!
CZcams: FIREANT
Instagram: @fireant_boats
Facebook: Fireant Boats
TikTok: fireant_boats
Visit Tiny Boat Nation on Facebook! This is the largest DIY Jon Boat page on Facebook with TONS of information, pictures and how to’s available.
Check out the Tin Can Crew CZcams Channel for more content and information on products used!
__________________________________________________________
VIDEO DESCRIPTION:
Thank you for tuning into the new episode of Project Wilson. We are turning this 15’ Fisher Jon Boat into a Tiny Boat! 25hp Mercury Outboard motor, 24v Minnkota Bow Mount Trolling motor, marine batteries, casting decks, livewell, fish finders, electronics, recessed foot control tray, hydroturf…this boat will be awesome! None of it would be possible without the help of Tiny Boat Nation! SUBSCRIBE so don’t miss a beat! Tight Lines!
__________________________________________________________
DISCLAIMER: Some links provided above make commission that gets put directly back into this channel for your entertainment and benefit. Modify your boat AT YOUR OWN RISK! Tight lines! - Jak na to + styl
SKIP TO THE SECTION YOUR LOOKING FOR! SUBSCRIBE TO THE CHANNEL!
Parts and Components - 0:58
Tools/Materials - 4:33
Why you should consider this kit - 5:18
Kit Price - 7:11
Other Plumbing Options - 7:23
Installation 9:28
I like how you slow things down to explain in just a little more detail than some other channels. Not to take anything away from them, they just explain and show things a little bit differently.
Dude made this whole kit made complete sense granted I haven’t ordered it quite yet but will be sooner or later
You made that look easy. And explained the install and components very well. Thank you for the great info.
YES!!!!Great video!! I've been dying for this one to come out....this one and the electrical. Great explanations as always. 👊
Awesome video bro, very helpful. Definitely gonna do one of these in my boat
Very dope build my guy!
Great videos!
Thanks bro I needed this! The others on CZcams was not as clear
Great how to video. We need more of these
Man its super long!
You made something that seems really difficult seem fairly straightforward.
We asked, you answered. You rock bro
Thanks Robert
Great Vid!
thanks man. great video
Awesome step by step.
Well Done 👌
Great video.
Seems like a really good kit. That boat is coming along nicely. Keep up the great work. 20k 👍🏻
Thanks Will!
I'd rather have the clamp fittings. You're placing a LOT of faith in the QD connections! (If it can go wrong, it will!)
PS- ALWAYS insulate your tank!
do now
Great Job very clean ✌️🎣👍
Thank you!
Great video brotha!
Thanks brother 👊👊
Rockin'!
Very good explications and yeah you say it buddy, we have different boats and we gone top whit some corners and small space that we must improve our selfs whit it..great clip and yeah when i will can do this order whit my PREMIUM kit i will do it for its that money maker on our TBNation bass boat project bud.
Albert here from Spain big hug and be safe.
Nice work, Sir. HooYah
I love what you are doing, and your builds are some of the neatest out there. I also think that you are explaining everything most understandably.
I hope my question does not offend you, but isn't the black tube used here a bit over the top? There are cheaper reinforced tubes out there that would satisfy generously the needed pressure and temperature for a livewell system. What am I missing?
Hey bud I’m right outside of douglasville ga . I need some tips on running my flow rite to two live wells
멋지네요
very nice video
wow ill watch lots its a lot
Do you recommend foaming around the aluminum live well to keep it cooler in the summer months ? My concern would be the aluminum would heat up the water when it gets hot
Looks good where do we get this kit. I wa t to redo my Lake and bay
This is by far the best video I’ve seen for this kit your explanation step by step made me buy this kit. Thank you from (Canada) Edmonton,AB.
Just a heads up. Where you screwed the cable to the valve, you need to slide the black part all the way back where it clamps to the thick end part of the black cable. You might not get a full open/close otherwise. Cheers.
I have important question in order to pump water out of tank, can you make it drain while in the water with a side of boat hole instead of back where pump is connected. So don't you need an extra hose and or T connection somewhere when u pull the aretor
Because in all install videos it just pumps out back drain. Can you explain or maybe a detailed video for it. I cannot find one to explain that process.
Good sh.. man
Not seeing your link to the picture on you phone - ie the live well diagram pic
Quick question
On the overflow valve, if you were to send the plumbing back to the transom and have it come out below the waterline would the back pressure from the opening sitting below the waterline cause the overflow to back up and not drain out of the boat?
Im currently building a live well myself
The overflow will be controlled by gravity meaning the water in the overflow hose will only get as high as the waterline on the outside of the boat. If your hose is attached to the tank lower than the waterline then yes you will have some issues
Where did you get that livewell at.
Do you have regular flush mount livewell drains that aren’t flowrite quick connect?
I do belive Flow-rite makes some that are not Quik Disconnects
do you have any recomandation on where i should drill the hole is there some danger zone on the transom or anywhere that fit is good ?
which hole?
Excellent step by step, but one thing I am confused with is which hoses go where. Is there a diagram ?
Shoot me a message on IG or FB and I can send you pics 👍👍
I believe in the "3-pumps for one livewell" situation, the third pump is for recirculating water in the livewell. In case, the boat is in a body of water where the temperature of the water surface is high, and you don't want the warm water to be introduced into the livewell, you shut off the other two pumps, and only run the recirculating pump. Then the recirculating pump can at least aerate the livewell. When you get out from that body of warm water, you can then turn on the other two pumps to get "fresh" water into the livewell. I am not sure if this is really relevant to your area; I doubt I need it because I live in the north. Having said this, the Flow-Rite livewell system seems to be able to use one pump for both recirculating and constantly getting "fresh" water into the livewell.
good point!
Sorry for the probably ignorant comment / question. At the 24:20 mark, I don't get the point of the drain hole out the side of the boat. I get the pump, pumping in water to the livewell, but what is purpose of allowing it to "drain" from that side when you have the drain in the bottom of the livewell and also the overflow on the opposite side. Seems at least in my head kind of pointless. I guess I don't see the point of of that component. I haven't seen the full application of one of these systems so maybe I am missing some of the core functionality.
great vid. just a few comments. there is no law that says the livewell pump has to feed from the transom. there appears to be a loop in the overflow that will hold water and freeze in the off season. all lines should drain with no sags to hold water. keep on!!
Can this pump pull the water up with suction or does the water need to be fed to pumps suction side?
Water will need to be fed to the pump, this is why it is important to have the pump mounted as low in the hull as possible.
This pump pushes, it does not suck
@@fireantfishing copy thanks!
Only reason I haven’t bought is because I can’t find the kit with the red switch, only the green switch, you say stay away from
The green switch, it is listed in the kit you have tagged ???
There is a green and an orange, our kits only have the orange👍👍
dammm. i need that shirt..😁
Only thing I don’t get is how the pump out works if it’s about the livewell water line.
This is the same question that I have
Do you have regular flush mount fittings for the bottom of the livewells that aren’t for quick connects??
Does that pump, pump water constantly?
Only if the switch is in the constant position
Am I the only one wondering about those four holes through the hull to either side of the through-hull pickup in the back?
yes?
Why would you need an over flow ? If you just fill it ,then recirculate, and then drain when your done. If you do that all properly it should never over flow right? I guess Unless the valve fails
Correct, it’s just for safety, incase you forget to turn off the pump. I’m sure it happens more than we know haha
@@fireantfishing oh ok thanks for the response!
When recirculating fresh water you need the overflow for the automatic cycle
Well. Looks like that angle drill was worth the money. Lol
Nice kit but really pricey
not loving that hard 90 on the flex line off of the pump..
Have you had issues doing that?
@@fireantfishing havent used this kit yet, but it just looks stressed.able to move that bracket toward the stern? and shorten the line between inlet and pump?
Though your video can be of great info. But I could not watch it more than one third. Because you repeat yourself to many times. Sorry