How to Replace a Clock Spring & Remove Steering Wheel | Silverado
Vložit
- čas přidán 16. 03. 2017
- DIY Bri shows you how to remove a GM Air Bag and steering wheel to replace a clock spring on a 2005 Chevy Silverado. Get real tips and find out the tools needed.
Tools needed:
OTC Master steering wheel set: amzn.to/2mAoIau
Snapring Pliers: amzn.to/2mVpam3
Inexpensive steering wheel puller: amzn.to/2mVo3CN
Hook Tool Set: amzn.to/2mVsvBT
Please Subscribe! / doityourselfbri
Like My Facebook Page / doityourself4life
Music credits!
Ice Flow by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Check out my other CZcams Chanel's Too!
My personal channel: / @brianbassett5468
My car problem/FIX channel: / @askmyautomechanic4133
My how to channel (this channel DIYBRI) / doityourselfbri
SUBSCRIBE TO ONE OR MORE OF MY CHANNELS FOR MORE GREAT STUFF! - Auta a dopravní prostředky
Excellent Step-By-Step. I am replacing a clients' Lock Cylinder Housing on a 2003 Silverado today, which requires removal of air bag and steering wheel in order to access some fasteners just beneath. I wanted to refresh self on process.
Most of my time is programming remotes and keys, dealing with electronics, and less anymore on mechanical. But a body shop whose mechanics are out at this time wanted me to do the ignition lock housing and the door lock, cut fresh keys by code and match everything up, as both have damage.
One important note: Many of these vehicles, especially diesels have TWO batteries. This can come as a shock or worse, so I would add some text to this effect at the point where you disconnect the battery. Thanks, EXCELLENT video.
Many thanks Bri, this DIY was very helpful for me to fix my Hummer H2 clock spring
Will this also help add steering wheel controls to a truck that’s power everything but didn’t have the Steering Wheel Controls?
Really would have liked to seen more close up of the wiring harness I am planning on changing my wiring harness to try to retrofit steering wheel controls into a truck that did not have them.
Yeah no shit. That’s literally the hardest part. You can find the rest of the crap anywhere on CZcams…..
Just did mine today, your video was very helpful.
Nice job on explaining the clockspring removal & installation
Very good Bri!
Great video Bri...but i do wish you had shown how to remove the module...what is the lift and slide lever you speak of!? I am doping this and cannot get that main module out. Any tips?
Is there anyway you could post a close up video on how the lift and slide that module?
Thanks for making the video. I ended up using the Dorman one and after the job I agree......just go with the oem one. Anyway, the video helped a lot, thanks
Great info in this video as well as all of your DIY videos
Thanks so much!
the replacement clock spring I got from my chevy dealer for my 2007 gmc 2500 did not have the wire harness on it, just the plug in.
Does anyone know if this steering wheel and air bag will work on a 98-04 S10? The 2001 Tahoe uses the the same wheel as an s10. The 2003 Tahoe has this style wheel, but the trim of the vehicle is the same. The ony thing I saw different for sure was the plug for the airbag in the wheel, but if you take the airbag with it, looks like it would work. The steering column is the same for both wheels. Will it work or does the wiring need to be changed. Their was a mint 03 wheel in the salvage yard. I took a leather blazer wheel in descent shape for my old crumby foam wheel in my s10 because its exactly the same, but I wanted that 03 Tahoe wheel.
does that effect traction control sensor
how do you remove the part that's right behind the clock spring do you just pull it out or is there a release spring I'm trying to replace the ignition lock housing
Thank you for the detailed video! I was having trouble figuring out how to get the air bag off until I watched this.
Great Fix, Thanks
Thanks!
hey how do reset the
light thanks
Can the cheaper part save on all of the wire harness work and how easy is it to do !
My 06 yukon had a kenwood double din with a pac steering wheel kit when I got it, if I broke the clockspring do I need to just fix the clockspring?or do I need to redo the pac kit too??
im just wondering what controls the air bag light in the hardness wheres the sensor in the plug??
Steering wheel puller is not required to do this.. once the nut is removed, the wheel will pull right off
I did it without it. Just wiggle it up and down and it popped right off. Didn’t even take much force
If it doesn't, just hit it with a hammer on the sides and top/bottom. That took mine out lol. Use a towel to prevent damage to the wheel
What issues were you havkng with the Dorman clockspring???
Thank you for the help. Now I'm ready to change mine out.
Thanks!
What time you get off
Could you make the same video but for a 2001 Chevy Tahoe?
Question after re-installing the Clock Spring I pulled the orange plastic thing off as you demo. it broke off and a tiny piece is left in the part on the vehicle, everything works as it should, no more service airbag light, etc, thought it was wired how it came off, however, the part I took off had the same piece left in, so I went along with it. Just curious.
have you ever used standard parts? CSP265
What’s the toque spec?
To add steering controls to 2003 Yukon that doesnt have steering wheel controls do I just follow your steps
Great video helping folks 3 years later! Is this for a B0043 Code? Or what code did you get?
How would someone fix the truck If the whole steering wheel moves like the whole assembly shifter and all
Have you done a ABS/brake module swap on a 2004-2007 Silverado! Requires 4 / T20 screws but space is limited. Cant find a video of anyone showing you how to losen those. They always skip that step!!
Does the new clock spring need to be programmed or coded to the vehicle?
Kakay good morning
Can you make a video fixing right rear side latch lock motor
And also tell me where can I buy that small motor???
Thanks
Here's one I cannot find on the net any place. How to replace the tilt lever on a 2004 Chevy Express steering column ...I bought a 2004 express van. And the knucklehead owner before me looks like he used JB weld to put the pull lever handle on to the tilt lever. I bought all the parts to replace both plastic but this one got me stumped. Looks to me you have to disassemble the whole thing. to do it right.
Can you install a steering wheel with controls if the truck didn’t originally come equipped with them?
Yes you can.. just go to an auto recycler and buy the wheel, clock spring, and complete wiring harness out of a truck that has it and swap it out with your current wheel, clock spring, and harness and you are good to go.. the radio controls will work without doing anything else. But if you want the driver info system to display, you will have to have your instrument cluster reflashed with a vin number from a truck that came with wheel controls from the factory.. there are videos on CZcams that tell you how to do that
Great video. Thanks for posting this. Quick question for you... How do you remove that plastic white connector that sits on top of the ignition cylinder? It has a plastic pin that drops right into the cylinder. Your video skips right past it and I can't figure out how get it off without breaking it.
Figured it out... Twist it 90 degrees out and pops off.
@@mijohnst hi, which way do you twist the tab?
@@ed66muscle72 I think you have to twist to the right and then it comes out. It was much easier then I expected but I don't exactly remember what I did. Don't pull too hard though because it'll break.
I lost where the little green plug on the clock spring plugs into the column.. can someone help me out?
What brand did you use
*Much easier than i thought, thanks! Question though Is it 100% important to unhook the battery before beginning? i've seen it done with it still connected and i've seen it done without*
Just disconnect it so you don't have to worry about the chance of blowing the airbag in your face.
@@jSCOTTmc80 that's what i did with the one i just did. i HATE changing out GM clocksprings with Dorman replacement parts though, it's always such a destructive and permanent process. that's what it took to get mine working though
Could a faulty Clock Springs register a fault in the Stabilty/ABS system?
How to'' replacement of steering linkage that connects to knuckle of
Rack& pinion'' 04 Chevy Malibu
tnx for the video very instructional,,,my question is why does chevy want to make more money by adding that harness,,when they can sell just the module,,,??????????
Will this cause my steering wheel to squeal when turning?
Thank you for the video Beest aiam from saudia aribia
How can you tell if the clock spring went bad
The airbag light will come on or the steering wheel buttons will eather stop working or not work when the steering wheel is turned to a certain point
I’ve got an ‘04 Astro and I’m getting a short when the steering wheel is in a certain location. It appears that the airbags have gone off in the past. Great van so far aside from this.
The clock spring is connected to the connection piece with a bunch of wires to it. When I first tired taking mine apart I had to stop b.c I had the wrong replacement so putting it back together the truck didn't wanna start. I went and clipped that connection in better and it started right up.
Is this likely my problem if I have error codes B0026, B0043, & B0044?
Did you have an extra plug? That doesnt plug into anything?
Why or what is the purpose to replace or change clock spring ??? My issue is rapid blink . It could be my blinker switch or this ... Yes lights have been replaced, side effects when I turn left it blinks normal when straight rapid. Arrow lights stay on until turned left.. honk horn some times it works normal blink now nothing idk I'm about done with this truck 😢
Does the clockspring also act as the steering wheel position sensor for the gms?
No. That's a separate part at the bottom of the column
How do you remove that brown and green wire connection on the back of the ignition switch
Did you ever figure this out? I'm battling that right now
anyone?
@@thomasdurkin9262 ever figure it out ? thanks
I can't remember what I did. I'll watch video again see if jogs my memory
Will this effect my brakes?
Do you completely remove the orange stop clip? Or does some of it stay in?
+Nick Rentschler just snap it off don't completely remove it
I keep getting the code B0042 and cant figure out as to why
Thanks amigo great job
What’s the part number for the clockspring
my truck won't start thought that we had it all hooked up lights work but no start.
good video but skipped the most impotant part connecting the wiring
Pleasing to the eye, lol, exactly what I was thinking. Made my day.
I want to convert my Chevy Tahoe with steering wheel radio control
Not bad, but nothing happens until 4:00 or so. Power tools are great, but hand tools can greatly reduce the potential of damaging nuts and stripping screws.
Sticks his arm through the steering wheel to start up after an airbag removal. Lol.
It's just an arm
This video leaves a lot to be desired. Most notable is the failure to show which wires need to be disconnected and how to do it. Simply telling viewers that you need a special tool (not shown) and naming the connectors is useless. And rule #1 when dealing with automotive electronics is... If you don't know what it is and what it does; leave it alone. Ignoring this basic rule is a good way to fry something. I had to learn that lesson the hard way. The only people who are likely to watch this video are the ones who know little or nothing about performing such a repair. Viewers need to see each step and receive good instructions.
With battery disconnected for 30min prior...NOTHING can fry
Thanks for showing us how to remove horn button & steering wheel 🙄👎
Says u need to use an impact driver to remove 2 bolts. First world problems lol
I hate how much these people speak and waste time.
You skip so much this video is useless. What about the key clips for security and buzzer. Mine came with so much more. Than what you show.
how do i email you
Have you ever seen a clock spring fail that just effected the air bag and not the steering wheel controls?