Custom Mini Pit Trike - Part 1 Do We Turbo It ?
Vložit
- čas přidán 24. 01. 2022
- ALL THE LINKS YOU'RE LOOKING FOR - linktr.ee/Boostedlifestyle
MERCH STORE - bit.ly/31oyxPj
PATREON - / boostedlifestyle
SECOND CHANNEL - / @boostedlifestyle2
SEND ME STUFF!
PO box 183 Riverstone PO
Fort Mcmurray, Alberta
T9K 2Y4
LEGACY AUTO ▶︎ bit.ly/2XS6VB7
MILRON ▶︎ WWW.MILRON.COM
BRIAN TOOLEY RACING ▶︎ bit.ly/2wtWB30
AFR AUTOWORKS ▶︎ goo.gl/Cvkvuz
SOCIAL MEDIA:
INSTAGRAM ▶︎ KYL3WILLIAMS
FACEBOOK ▶︎ goo.gl/e6oysC
SNAPCHAT ▶︎ WOOWOO16 - Auta a dopravní prostředky
Need a custom pit trike to tow around my promod lawnmower now I guess 😂 but for real 1 week until sick week! Let's get this done 😁
3 wheelers are so unstable front end with single wheel for steering, Personally I would use single wheel rear for drive using a sway arm from motor bike and duel wheel steering front would be so much better, Could even use individual front steering sway arms on front so it lean over when steering, ya know the ones I means, Coz leaning. czcams.com/video/4vtOcou_qXQ/video.html
Idk if this will help but most mini bikes have 2 bars across the top where u sit, not one
Yes turbo
Haha Awsome! Just wondering when you are planning on more mini Roy content !
Hell yeah brother! Sick week sounds awesome. I'd love to meet Cleetus or Derek sometime. Hope you get lots of content. You doing any streaming during the event?
Kyle Nose what he's doing! Keep up the good work! My wife and I enjoy the content.
The two rear tubes are a good design choice. Gina will be happy you decided against the Canadian Castrater single tube. 😄
whenever i drill i make sure to stiff arm it or put it against my forearm, leg etc so its already against something and cant get a free swing and 300* me, maybe consider a way to mount it lower?
Ahh I feel Smrt. Watching the process of figuring out the two upward bars where the camera is just off to one side, found myself leaning to the right trying to see if they were lining up properly like I was right fuken there, lol.
Blue Dream is a helluva strain.
Building things like cars and camera… I like it
Turbo???? YESS YOU CAN DO IT !!!
That last design looked way better
I like how you’re going out of your way to learn new skills. Probably the best content you could have for people to relate too
Heck yeah 😁 I always wanna learn new stuff!
Wouldn’t it be nice to be in a nice warm shop in Edmonton where things are more accessible and cost less then Ft McMurray 😝
Definitely turbo it. 👏👍
Awesome! Looking forward to this latest build and your trip to Merica and the freedom factory! 🇨🇦🙌
Those wheels and tires Are sick
MAN THAT'S GONNA LEAVE A MARK!
Your learning as you go... that my friend is called progress! Good work man!
Like your approach, trial and error. Good energy. Really nice project.
I can't wait for you to experience that sticky ass surface that is Bradenton motorsports park! Koller track & next door to the freedom factory, welcome to my backyard
That's going to be sick! Can't wait to see it completed.
Starting to move up as my favorite Canadian. That's a sick little buggie frame
Heck yeah man!
Hell yeah!!! That thing is AWESOME
Dude your going to be the talk of the pits!
That's the plans 😂😂
Best candadian on the tubes
Yes definitely turbo trike!
Them tires make it look so cool 😎
You should keep the tires that size. Love the meaty look with how low it is. Reminds me of a Rpf1 17x9 look with thick tires.
This looks sick!
Yesss! Turbo it! 👍👍
Built a lot of karts. Vacuum fuel pump off of the valve cover. Pull the governor. Stiffer valve springs. Bigger eBay carb with huge filter. Open long header blowing the debris away from the drive tire. Good fuel. That 6 hp turns into about 13.
I'd like to do a 212 build !
Nice frame !
Thanks for the tips !
Ill Will build a few with 420cc motor .
Great job love your work more please I'm a fan love the little trike thanks for sharing
Badass build man 👍
Allright, man... ya got me... it was the little trike.. I mean ... I love the lawnmower build... but, I'm a sucker for a trike...
Mebbe I'll start something soon.....
this is getting very interesting! I like it
Looks great from here man!!
This thing is going to be friggin awesome dude
Sorry to hear you're going to be sick for a week. Get well soon! ;-)
You wear it well !!
& great job
Love the idea and how you ended up with the dual brace than the high camel bar at first ... Hope there is anyway you can make the seat braced and bit far from the fuel tank
The first frame iteration was perfect size to hang a turbo in and be right at the intake and exhaust.
Frame looks way better the second time
Gina be a sick little build
I did the same thing you did with the drill, but with a Milwaukee Hole Hog. I had a 3/4” 16” auger bit, and was trying to drill through a 2x6 length wise for a gas line. It grabbed a knot, swung around the Oh Shit handle and smacked me across the bridge of the nose, giving me a bloody nose and concussion. Fun times. At least yours wasn’t too to bad. This is a cool little pit trike your building. Can use the lawnmower as a push/pull ride. Cheaper and cooler then a smart car
Man I did the exact same thing with the drill but it got me right over my eye! Caught it on video too, Haslip Cycle Works. Love the build.
The crazy guy with eight turbos must turbo the mini three wheeler
Kyle you rock! Love the channel and content! I'm here for the algorithm! Peace
Aside from the triangle plate at the back, you'll want some kind of gusset on the frame neck tube, mainly just to prevent any twisting between the top tube and the two bottom frame tubes. You could put some around the bottom of the frame, but I really don't think they'd be necessary at all, almost all the force is downward at those points.
5 days, 40 hrs. (80) you got this, Killin it!
Iv built so many minibike. It's s blast. Love it. Go-karts also
Nicely done. On a lighter note 2 hours 2 tubes first time. Hey education cost. Lol
Keep up the good work
I need some part numbers or link to some of these parts and a sketch or drawing with some dimensions hahaha. Watching this video just makes me want one lol
You could use a motorcycle bobber style seat.. or even a springer seat!
Looks great
Don't forget to plug that hole on the turbo lawnmower
Verry cool and my notcher had the same issue with going off set so i spaced out the hold down with a few machine washers
I shimmed mine with a 10 thou feeler gauge and it works a bit better now
Love this build.... I had a thought for the seat. if you made the seat pan part of that triangle bracing you spoke of joining all the bars together then all you'd need is a rear brace down to the frame above the axle so the load is distributed evenly. Might look rad?? also gotta add some led lights so folks can see you... especially being down so low.
Either way.... I'm sure youre gonna kill it as usual!
Good luck!
Be honest ATK had to set you straight and got a little ruff lol 👍
I could hang out for life doing this kinda stuff.
Can you tell me what size pipe you used for the mini trike? Thank you for all the awesome videos.
New build already.? Damn u getting crazy 😂❤️
FREEDOM FACTORY! I’ll be watching from Germany. Have fun.
thats gonna be a swagged out whip
When sat on the step stool thing it looked like sissy bar...ol school chopper I could dig that too
Remember we do pit bikes races at forestburg a couple times a year...
This is awesome man, have u ever built anything with electric motors and stuff? I think a 72v boma or vevor motor with a 72v kelly controller would work great on this build!
It won't be very stable in corners, 2 wheels in front and one rear is a much better setup. Will be fun though 🤣
Always need a turbo
Yes we turbo it
Canadian Country Choppers 👍
Ok seeing this made me sub keep up the crazy shit man
The name of your channel is boosted lifestyle… Of course you turbo it
Should go a springer seat like a hardtail chopper
Id definitely say its better with a turbo send it!!
Ok, now you're just showing off. 😁
The Center bar kind of looks like you got inspiration from you haircut 😂 Have fun on Sick Week!!!
Tape the selector on your drill before she knocks ya out buddy👀
Make sure you put a torque converter on it. I put one on my minibike preditor 212 it was nasty
Put a Turbo on it 😅😆👍
Im still waiting for The Mini Roy!!!! Also use elecrtic tape or duct tape to hold it in gear for the drill it will help lol maybe ill just order a nice dewalt and send it to you.
You need to just purchase a new drill and you wouldn’t have that problem then love your video man great job
Kyle look up cuppini handlebars, really think that type of handlebars would look cool on the trike🤟
nice
the trike looks cool I worked n fabrication for years I know with the editing and all you've probably already mounted the seat but if not u could put a piece of pipe under the intersection wear the frame mounts n the back and make the seat like u were talking about but but have the bottom of the seats are it will slide in and out. for the pipe welded n the intersection it would have u lower and would look like its floating and it would adjust in and out slide it back for weight transfer were u could do willys and shit but it still looks cool the way u have keep the content coming
Maybe use a Oldschool tractor seat for the trike
Kyle, you should use an endmill bit the same diameter as tube that you want to notch in your metal lathe.
No turbo. Play with this for the week, come back and get back to the Mustangs. Spring weather is actually coming faster than we think.
You can turbo it just not yet, build it with turboing it in mind and keep it n/a for now.
I personally would suggest moving the position of the rear axle back ~10-12 inches maybe even more just so you aren't sitting on top of the axle.
I have a custom mini chopper trike would love to turbo charge it you will have a bowl Kyle love your work mate blind garage approved 5 gold stars
TRACTOR SEAT!!! You need a tractor seat mate!!
Esta muy bueno eso disculpe de casulidad tendra las medidas para poder realizarlo muchas gracias
Hey man we already spoke about building something electric…I promise you this is the perfect candidate.
Omg electric swap after !?!
@@Boostedlifestyle I sent you some videos of my electric build on Instagram…it’s super fun honestly.
I can tune it with a usb to my pc now it’s cool af
You don’t wanna be going a million miles an hour on that thing do you so I’d stick with a 48v system.
But get a high discharge battery and a good controller and send some current through it. It’ll have torque for days.
Screw the lawnmower you can tow the ‘stang 😀😂
Kyle you are crazy. Stay safe and warm. Hi v.
I just smacked myself in the nose with my drill 10 minutes before turning to this video!
Looking 👍
Put pvc drift sleeves on the rear for an even less safe toy than the mower, that I would also love to have.
you should make a shirt that has a BUNCH of your quotes all over it. "It's all done...after I finish all the welds"
Haahahah I'm.the worst
Yeah gotta ditch the gas tank. And exhaust.snd get an after market carb kit for that. Makes it so much better
If you do turbo it you should do a before an after et run to see if it improves anything
Can you mount that tubing jig on your drill press???
You need to drill 8 inch vent holes to relieve gases from building up inside the tubes
Needs holeshot tires 🤘🏿