[Mod Guide] NERF STAR WARS Jyn Erso/ Captain Cassian Deluxe Blaster (MOSFET NERF MOD)
Vložit
- čas přidán 12. 09. 2024
- UPGRADE THE POWER BUT KEEP THE LIGHT AND SOUND! Please Subscribe / naptownnerf Keep Reading...
My Patreon: / naptownnerf
My Instagram: / naptownnerf
My Facebook page: / naptownnerfmods
My Twitter [NEW Please Follow]: / naptownnerf
_____
I finally got around to modding my Nerf Star Wars Jyn Erso/ Captain Cassian Deluxe Blaster. I really wanted to keep the lights and sounds when upgrading the performance of this blaster, but also wanted the option to turn them off. I was able to accomplish all this in this mod and hopefully this guide will allow you to do the same. Using a MOSFET in Nerf modding Is extremely helpful and not as hard as you may think. This rewire definitely took quite a bit of time, but is definitely wroth it. Hope you enjoyed and learned something from this video.
FDS MOSFET guide video: • How To- MOSFET's For Nerf
FDS Captian Cassian Blaster Mod Guide: • Cassian Andor & Jyn Er...
[BUY PARTS/ MATERIALS HERE]
IRFZ44N MOSFET: www.ebay.com/s...
IN5400 Rectifier Diode: www.ebay.com/i...
10k Omh Resistor: (This pack of resistor should also have the necessary one you will need for your LED circuit) www.amazon.com...
Buck Converter: www.ebay.com/i...
22 AWG: www.amazon.com...
16 AWG: www.amazon.com...
18 AWG: www.amazon.com...
Wire Holder: www.ebay.com/s...
Heat Shrink: www.amazon.com...
Solder: www.amazon.com...
LED on/off Switch: Amico 20 Pcs DC 50V 0.5A 3 Solder Lug Pin 2 Position SPDT 1P2T Mini Panel Slide Switch
Epoxy Putty: www.amazon.com...
Fang Re-Vamped Motors, Cherry Switch, XT 60 Connector: foamblastshop.com
[TOOLS]
Voltage Tester: www.amazon.com...
Helping Hands: www.amazon.com...
Side Cutters: www.amazon.com...
Dremel: www.amazon.com...
Soldering Iron: www.amazon.com...
X-Acto knife: www.amazon.com...
Wire Strippers: www.amazon.com...
Music: Ship Wrek, Zookeepers & Trauzers - Vessel [NCS Release]
Download Here: / theshipwrek
#nerf #nerfmodguide #starwars #nerfmod
1:45 teardown and overview
6:45 Flywheel cage
11:00 Making room for a LIPO
11:53 Rev trigger microswitch placement
13:30 Removable flywheel cage Dean's connector placement
14:44 Diode
16:02 LED and sound trigger placement
18:05 Buck converter set up
19:36 Rev trigger microswitch rewire
20:25 MOSFET
22:08 Running leads to battery tray/ Wire up
24:07 Rewiring UV LED's
29:17 Battery tray modification
30:29 Firing/Chronograph test
Naptown Nerf think I might minimize this a little bit if possible
Espetácular sem dúvida
i know its crazy but i am going to attempt this as my first mod ever. wish me luck. onto learning about soldering for step 1.
Nice guide. Thanks for showing the mosfet stuff.
Yup. thanks
Nice job, very informative, great sound and image quality, gave props to FoamDataServices, did not overuse "cool"/"very cool" - this might be Your best upload. Was a pleasure to watch. Thanks!
Thanks
Is it bad that I put a 9.6v airsoft battery powering mine... and mine is stock
Very nice. Thank you sir!
Yup. Thank you
Welcome!
Which Naptown are you? Indy? Ann? If you're Indy, we could nerf. Central MI here.
See you @ Endwar, if nothing else.
Indianapolis. If you don't mind a drive, join us for a Naptown Nerf Club war some time.
I just might do that. Looks like a 5 hour drive, I'm in Midland. I'm not on Facebook, got a website? Reddit username/sub?
Awesome mod can't wait to destroy my enemies like Jyn Erso🔥
Exactly what I plan to do with mine, once I get an OFP cage for mine. This will definitely be my guide for it!
Jamie Norwood i would look in to local maker spaces and print it there. Because the files are open source
I know that ot has a mosphet but can you twist the leads of the thermoster and if the mosphet gets fryed is it a series circut or parelel circut. I only use hmirs so im not runing lipo curent through the system
Can this be used to rewire a soldier 76 blaster? If so what colors are the positive and negative for led lights?
Eu só brasileiro
I just found this at goodwill last night
My motors are sliw
I did the exact same thing but with Krakens, ive noticed however the wheels seem to be offset to the right of the blaster. Also it dosent seem to have the power of my other builds with the exact same parts as this. Any pointers?
I just modded mine erso blaster also. Vals on a 3s. I think the barrel is too long, plain and simple.
i am almost done with this build, its my first ever. i am having trouble with the uv leds. i am testing on a 4xAA pack but they don’t turn on, i wired the middle pin on the switch to the red wire coming from the switch and the normally closed pin to the positive onthe leds. the negative from leds to the main battery negative, is that all correct?
Great video
thanks
20:52 i literally fell out of my chair laughing
Hey you didn't link the lipo? Which one did you use again?
Actually ran out of characters in the description box. Lipo is a 2S 1000mah turnigy graphene. Should be a link in my Stardust vid.
Oh cool!! Thanks man! Your the only one that links everything. We all appreciate it.
No prob. Thanks
cool
Holy crap that sweet.
Thanks
Fuck this is my next mod 'step-up' and it definitely seems like a daunting task. Awesome job on this mod guide, for sure the most informative one I've watched so far. That must be how they wire up the regulator as well.
Stop cursing on Nerf threads you piece of dog shit.
Awesome Guide.. I just liked and sub to your channel. You have great videos on mods and Nerf info..! How do you like those Fang Rv 130 motor on the CA? Do you think it can handle 3s. I remember FDS did a 2s and 3s Chrono test. Did you ever try it on those Fang Rv 130 motors ? I am a newbie so maybe the Fangs RV are just for 2s only? If you did try 3s what kind of results did you get?
Thank you for your time and passion for Nerf Naptown Nerf..! Love those Thrift videos hauls as well.. its hard to find Retaliators at thrift shops where I live.
Thanks. Fang RV can go to 3S but only useful for an Eclipse setup.
Cool..! Sorry for the newbie question is Eclipse a type of cage? thats all I could find . I talk to FDS and he told me to be careful about the OFP cages.. I am going with the containment crew cages. If you have a link to the Eclipse setup that would be awesome. Thanks again for the videos and mod help Naptown Nerf, hope to see more videos..!
Yes. It's a type of OFP cage that's metal. I have a very in-depth review on my channel about it. Yeah OFP cage for this blaster doesn't really work as of now.
Cool I say that video is it out of production I think you said only 100 where made and 60-70 sold to public does if fit in the CA blaster.. that would be a cool setup on a video :D Thank you for your time and passion for Nerf..!
Yes, he's currently working on a Gen2 version. It's made to fit a Stryfe or Rapidstrike.
He that the video isnt really long, 30 minutes, oh well
what are mosfet and why did you use them?
MOSFETS are a device that allows you to use a low discharge battery and use low guage wire and have it be able to take high demands. He used them because their generally considered safer than normal.
Dart Storm So the battery that he put in was smaller than normal because of this? And still gives the same power as a larger battery without it? Sorry for the newbie questions. Thanks for answering.
The MOSFET allows him to use the smaller battery. If he didn't use it the small battery would drain all of its charge rapidly. Think of this as something that allows small amounts of current (Amps) to be turned into larger amounts of Amps. Also no problem In the nerf community it is out task to help the new people around here. I was like you a year earlier. ;)
Were You able to do some further research into offbrand cages for this beauty. I totally love the somewhat realistic looks and would like to mod one. Thanks.
Containment Crew's cage is the only one I know of currently that actually fits. I have a friend working on one though.
Hydro-dip it!!
We did a nerf mod on our channel yesterday exploding soda bottles, great fun, check it out if you get time 👍
#naptuwnnerf