DIY Pie Cuts Basics

DIY Pie Cuts Basics
We show you how to start making Pie cuts, they can be used for. You can use them for custom exhaust for turbos and motorcycles. There are many things you can use pie cuts for. Later we start welding the tubes together.
This video uses a Fein Slugger cold saw by Trick Tools. The link is below. We also have the optional the block jaws. This is a heavy duty 14 inch cold cutting saw combo it is metal stainless and aluminum blades. If you want quality this is it it’s not sheet metal.
www.trick-tools.com
14”fine saw
www.trick-tools.com/Fein_Slug...
Email: [e-mail]
Please note: We are an Amazon Affiliate program member, And We are paid by Amazon when you buy any of these products. We do use most of these products.
DJI OSMO Action Camera Bundle with Micro SD Card, Tempered Glass Screen Protectors, Carrying Case, and Must Have Accessories (55 Items)
amzn.to/2NptoPo
CYNOVA Osmo Action Dual 3.5mm Mic Adapter - Made for Osmo Action with Authorization
amzn.to/3fPQ0on
BOYA BY-MM1 Video Microphone CZcams Vlogging Facebook Livestream Recording Shotgun Mic for iPhone HuaWei Smartphone DJI Osmo Mobile 2,for ZHIYUN Smooth 4
amzn.to/2NrJJ6d
IENZA Replacement 3.5mm TRS to 3.5mm TRRS Patch Adapter Cable for iPhone Smartphone Movo BOYA BY MM1 Rode VideoMicro Mics
amzn.to/3ev4JVB
RAVPower FileHub, Travel Router AC750, Wireless SD Card Reader, Connect Portable SSD Hard Drive to iPhone iPad Tablet Smart Phone Laptop for Photo Backup, Data Transfer, Portable NAS, 6700mAh Battery
amzn.to/2YtQYAO
DJI CP.ZM.00000064.01 osmo Mobile 2 Handheld Smartphone Gimbal (Single Unit), Gray
amzn.to/2Ver3ep

[@wootuser]

Thank you - You just explained EVERYTHING I was looking for.
I am doing my own Turbo tubing and have to do some weird turns, it seemed every video only talked about it or went into a geometry lesson.
Thank you - for taking this straight to the point.

[@JeepingMo]

Looking forward to the other videos.

[@migueldomingues3739]

Thank you very much!

[@jeepzentoks542]

I'm also looking forward to more videos 👍

[@4x4fabshop]

Thanks for the good comments comments.

[@DustinGould]

Apparently there is a pipe sander tool ---- think a spring loaded belt sander on a angle grinder that you can cand half a pipe diameter at 1 time ---- supposedly the cats ass for cleaning pipes bro

[@paradiselost9946]

hardest part of pies is holding the stinking things. and doing multiple pipes with 60+. where to start first?
a nice fat heavy old school tape dispenser, with a nice fat gap just behind the blade so you can get your finger under the tape... hard to find these days! had to take to mine with an endmill. seriously, youll know what i mean once you start taping a few pies together.
if you really get into it, best to make a jig.
i have two v block clamps, one slides and is adjustable. both mounted on a saddle that swivels to stops and just clamps in the saw vice. rock the pipe side to side rather than flip it over.
i can talk, i still use a bandsaw. yuk. terrible on pipe. really do need a coldsaw...
mark the seam off to something half the pipe diameter, always line them up on center, then theres no issue with using the five left from last time...

[@4x4fabshop]

Thanks for sharing, it’s always good to hear from someone with experience.