2010-2015 Camaro ZL1 Big Brake Kit Install - Camaro SS RS LT LS V6 - CTS V

Welcome back to the channel! We are back on Cliff's 2012 Camaro with the 3.6L LSX engine. In this video we are showing how to upgrade the front and rear brakes to the large ones found on the ZL1 camaro and CTS-V.
👉🏼 LINKS TO PURCHASE TOOLS & PARTS FEATURED BELOW👈🏼
#Camaro #CamaroDIY #BigBrakeKit
⚠️Try anything shown in this video at your own risk ⚠️
00:00 Introduction
01:00 Parts
01:26 Front Brakes
13:09 Rear Brakes
16:22 Wrap Up
********************************************************************
Associated Videos
********************************************************************
ZL1 Master Cylinder Upgrade: • How to Replace and Upg...
********************************************************************
🔩Parts (Affiliate Links - Help Support Our Channel)
********************************************************************
Goodridge SS Brake Lines: geni.us/ZL1_Go...
ZL1 front brake kit for Camaro SS (part number 22959672)
geni.us/ZL1_Fr...
- It includes racing-style front two-piece, 14.6-inch front rotors and six-piston Brembo calipers with aluminum housings and ZL1 logo. The kit includes two rotors, two calipers, brake pads and mounting hardware. It is a direct replacement for Camaro SS. It works with production chassis controls, including StabiliTrak, traction control and antilock brakes, and does not void the vehicle warranty.
ZL1 rear brake kit for Camaro SS (part number 23104466) - It complements the ZL1 front brake kit with ZL1-logo calipers. The kit includes two calipers, brake pads and installation hardware. It works with production chassis controls, including StabiliTrak, traction control and antilock brakes, and does not void the vehicle warranty.
ZL1 front/rear brake kit for Camaro V-6 (part number 22989384) - Upgrades the front and rear brakes for 2010-and-later Camaro V-6 models with the 14.6-inch front and 14.4-inch rear brake components from the ZL1. The kit includes two front, two-piece rotors and six-piston calipers, two rear single-piece rotors and four-piston calipers, brake pads, master cylinder and installation hardware. Twenty-inch wheels are required for caliper clearance. It works with production chassis controls, including StabiliTrak, traction control and antilock brakes, and does not void the vehicle warranty.
******************************************************
🔧 Tools Shown In This Video (Affiliate Links)
******************************************************
******************************************************
🔧 Recommended Tools (-Affiliate Links-)
******************************************************
The Milwaukee Impact is a MUST HAVE tool - By far, the best tool purchase
----
Mid Torque MLW2861-20 M18 Fuel:
Tool Only: geni.us/MLW286...
Full Kit: geni.us/MLW286...
High Torque 2767-20 M18 Fuel:
Tool Only: geni.us/MLW276...
Sockets & Wrenches:
We Recommend GearWrench
Standard (English) Impact Socket Set: amzn.to/35KId7o
Metric Impact Socket Set: amzn.to/2LsZvgh
Standard (English) Size Wrench Set: amzn.to/2SSrgTp
Metric Wrench Set: amzn.to/2AfZn1c
1/4" Torque Wrench: amzn.to/33diIfW
3/8" Torque Wrench: amzn.to/2XcilOY
1/2" Torque Wrench: amzn.to/2CWLiHO
Jacks and Stands:
We love the quality of Esco Products and recommend them:
Esco Jack Stands: amzn.to/3cmAmiO
Esco Floor Jack: amzn.to/3fAIUoA
***********************************
⚙️Torque Specs -
***********************************
********************************************************************
🎬 Recording equipment (Affiliate Links)
********************************************************************
📷 Video
Canon EOS 80D Digital SLR Camera Body: amzn.to/2omC7VG'
Sigma 18-35mm F1.8 Art DC HSM Lens for Canon: amzn.to/2GxAGeh
🔊 Audio: geni.us/PicoMic
💡 Lighting:
NEEWER CN-216 216PCS LED Dimmable Ultra High Power Video Light: amzn.to/2Hl3QO7
Excelvan 2000W Photography Studio LED Lighting Kit: amzn.to/2HiyZls
----------
Thank you to all of our fans and subscribers for supporting us on our journey!
FOLLOW US ON INSTAGRAM: @THESUNDAEDRIVE - thesundaedrive
CHECK OUT OUR WEBSITE & BLOG: www.thesundaedrive.com

[@JohnKotch]

Great job! Thanks.

[@TheSundaeDrive]

thank you!

[@Octaviodeiques]

What’s the part numbers for the front and rear rotors and pads ?

[@crspcritter]

😎 wife has 13 Camaro v6 . May consider: rotors warped . I have the 17’ Silverado. I’ll stay tuned in - 🙏🙏🙏

[@josephzeigler5518]

What about the emergency brake connections on the rear brakes. I keep reading the ss and rs e brake connection is different.

[@JMSG]

Do you recommend replacing the brake master cylinder from the v6 to the v8 for this project?

[@isnowyazn]

Yes, most people who plan on keeping the V6 usually do so; not necessarily to soup the ever living hell out of it, but just simply for really good brake performance.

[@Musclesmarinara]

2017???...hahaha..Then when I bought the 535!...Great vid though👍👍

[@TheSundaeDrive]

Lol yeah man. That's crazy. You've had it a long time!

[@pablosproduction9387]

What year Zl1 rotors did you use did you get front and rears and did you use the same caliper bolts !? My it’s a 2010 Ss

[@grantwesterfield9062]

That’s what I’m askin?!!

[@pablosproduction9387]

@@grantwesterfield9062 what you trying to do bro

[@tonysosa1293]

What year front calipers did you use?

[@isnowyazn]

09-13 Cadillac CTS-V or 14-15 Chevrolet Camaro ZL1

[@CeeJayC3903]

Where'd you get the rotors?

[@TheSundaeDrive]

It's been awhile but I believe I got the part numbers and ordered from Amazon or eBay. I do have some product links in the description but I need to search a bit more for some of the others.

[@isnowyazn]

I personally got some off of Rock Auto. Mine is a daily, so I don’t need those RIDICULOUS expensive two-piece rotors from the ZL1…. Any solid 2nd gen CTS-V front brake rotors should work just fine. I stuck to semi-metallic brake pads as well, for performance reasons.

[@brandonspencer84]

You mean 3.6L LFX V6 Engine

[@TheSundaeDrive]

That is my engine yes. What did I say in the video?

[@brandonspencer84]

It's on the description LSX