Ive seen a lot of shoddy work on here but you actually did a really good job. I think the spindle lift was a good choice for the front, and the rear is fine, yeah its lifted on blocks, but its not gonna make much if a difference for the ranger. I also like how you didint just throw a lift on it and neglect everything else, you replaced worn out parts and took care of the brakes. Good job 👍
would this lift kit work on a 2001 ford ranger 4x4? im looking to do the same for the best price possible of course... also wanted to ask what size specs r the wheels and tires i love those wildpeaks awesome tire choice!! how do you like it so far? how does the new lift handle and treating you? any new gremlins and sqeaks because of the lift install? i only ask because my leaf spring bushings for the rear shackle mount r all dry rotted, wondering if it would be cheaper to get a lift with new leafs or just buy new bushings for the 20 year old rusted out set and install some spacers.... so i ask if you dont mind how do you like the lift would you recomend it? also would it work on a 01 ranger 4x4 with the 3.0 v6 not that the engine should matter much... but also interested in the tire size that looks absolutely perfect!! those r on 17" rims correct? how wide did ya go and whats the offset if u kno? thanks so much god speed awesome looking ranger!!
XANNY JB yeah I’m about to purchase a set I have a truck with the similar lift setup but I what I meant to say if why did you have to do some grinding on the upper control arms the the lowers ?
Likely a 4". Least that's the biggest I've seen. Just lifted mine. 4" blocks + 2" Shackles in the rear, 3" Risers + 4" Knuckles in the front, with 2" offsets all around, currently sitting 38" Lift all around, and still haven't put my 35s on er yet.
i have the same ranger but i have one question. for your suspension you did 6in spindle lift kit and a 4in block kit, do you have to do the lifted coil springs or could you skip that
Thanks so much man bro canbi ask you a question listen today i met a guy who says he can fabricate upper control arms for my ranger he wants to do a few measurements in order to make them what do you recommend get the ones you bought or go with fabrication 450$ by the way for fabrication....thanks for taking your time
Awesome build, I love those old rangers, thanks for sharing
Ive seen a lot of shoddy work on here but you actually did a really good job. I think the spindle lift was a good choice for the front, and the rear is fine, yeah its lifted on blocks, but its not gonna make much if a difference for the ranger. I also like how you didint just throw a lift on it and neglect everything else, you replaced worn out parts and took care of the brakes. Good job 👍
Bro this truck came out sick🙌🏽🔥
Yo that changes the whole stance. Looks slick.
looks sick, Wheels and that white paint
Sick truck bro! I love older modeled rangers!
Good shit homie..I got into Ford pick ups heavy since the pandemic it helps pass the boring hrs..salud 🥂
Awesome job in my book!!✊🏽Congrats!!
Great video! Love the music! I wanna drink margaritas, and eat fish taco while watching ya'll work.
Cheers brother
Spoken like a true Mexican
Very nicely done!
Hell's yeah came here from FRN nice truck bro
Thanks bro I appreciate that
You have a list of all the parts you used?
I want make my look like that 👍🏻
Bro looks good af!!
You should make more content with the ranger 🤙🏼
nice job i hope to fix my truck bed and potentially get more access to the parts needing replacement.
I am planning to get an ranger. This video makes me feel better to get it . Do you have the name list of part you bought? Thank man!
I just got a ford ranger the other day very fun trucks to drive
Good shit my guy🤙 I like those wheels
Fucken sick bro looks hella clean
I got a 94 Ford Ranger same Color is this and it's on Stocks as in now but looking to go big on it.
would this lift kit work on a 2001 ford ranger 4x4? im looking to do the same for the best price possible of course... also wanted to ask what size specs r the wheels and tires i love those wildpeaks awesome tire choice!! how do you like it so far? how does the new lift handle and treating you? any new gremlins and sqeaks because of the lift install? i only ask because my leaf spring bushings for the rear shackle mount r all dry rotted, wondering if it would be cheaper to get a lift with new leafs or just buy new bushings for the 20 year old rusted out set and install some spacers....
so i ask if you dont mind how do you like the lift would you recomend it? also would it work on a 01 ranger 4x4 with the 3.0 v6 not that the engine should matter much... but also interested in the tire size that looks absolutely perfect!! those r on 17" rims correct? how wide did ya go and whats the offset if u kno? thanks so much god speed awesome looking ranger!!
That’s a great build
Good truck and cool dog
Nice truck
Thanks for the video
I want to lift my ranger also
Hopefully soon.
What kit did he install? This thing is sick and I want one for work.
Nice man I got the same set up on mine. Are those fabtech control arms?
You got a parts list( names of parts and companies you got them from)? If so that would be great. I wanna do a little over landing theme on mine
i fw the baby keem song choice, i have a 2005 ford ranger xlt that imma try to clean up like this
Sheeeeshhhh perrito ❤ clean asf my boy
Looks dope thats what I want to do to mines what website u went to for the parts brother?
Just bought a 04 ranger and looking to do the same. What all did you parts did you buy for your set up? Love the build looks great
Look in the comments
Lol DUDE we have the EXACT same truck. Lookin pretty bad ass!
This whole video was awesome ha!
Nice truck
Yo bro did you had any problem with the fromt side with any bumps or anything banging ?? Because of the suspension
Awesome video just got a 04 Ranger it’s in mint condition wanna maybe do the same process as you 🔥
Can you detail full build sheet I have one and I want to do same set up
Would you have the part number for the upper control arms you used ? Thanks
damn bro looks nasty whats your wheel and tire setup?
I hear los desvelados In the back 🔥🔥🔥
How different does it drive compared to stock.
sick set up bro shits mean asf
What size lift did you do ?
I dont know much about lifting vehicles but wouldn't the block being held in by friction might be a little dangerous.
Truck looks dope nice background music
G Demaio thanks bro appreciate it
How much did it cost to lift the ranger without the rims
Hey nice job!!!
How much do you spend?
Cual es el offset de los rines ?
O traes spacers?
If you could link all the parts out that would be awesome 😎 thanks in advance
Read into the comments its all there
Qual é o link pra comprar essa suspenção?
bro can you post the link where you got the parts please
Link for the lift kit??
How long will the suspension hold up with a 6 inch lift, looks sick what does a kit like this cost.
I need a ranger for beater truck for work on house projects.
Can you list the lift kits and tire price
Gotta do a parts list bro
Great music
What kind of upper control arm did you get
Cómo los consiguió el kit elevación pará pedir igual tengo una 93 sencilla seis cilindros
Have a parts list? What size block? And U bolts? Shocks?
how much was the total build money wise
What wheels and tires did you put on
What year is this? And is it a 2wd 3.0??
Where did you get the front bumper??
What is the total lift in the front?
It’s it a rwd only or a 4x4?
Cuanto me cobra por levantar la mia yo pongo el kit!?
6 inch lift in the front with only trimming the front bumper? or did you have to trim the fender?
I did not have to trim the fender
how much did all the parts and rim/tire setup run you? looking to do the same thing to mine basically
Claude Jones it was about 3 grand for the set up.
What wheels and tires were those? Specs please
Nice video
What size lift did you put on it? Nice set up looks good!
For real what size
6’ maxtrac suspension lift 33in wildpeaks
Fuck I just ordered same wheels 15x8 hopefully I don’t regret it or might just throw some 2” spacers 😂😂
Great looking truck bro
What size tires are those
What size of wheels are those?
What offset are on those wheels
What's the acceleration?
Yo if you don’t mind me asking how much did you pay for the lift and wheels.
$1500
What size tires???
I want a ranger now lol
Yoo, what wheels are those?
what year model ?
Are you from the vista area? I think Ive seen this truck around
No bro. Riverside
How is the quality of those upper control arms and why did you have to trim the tops down ?
There made for off-road, they work absolutely flawless and they weren’t that expensive. I had to fabricate to get a better turn radius.
XANNY JB yeah I’m about to purchase a set I have a truck with the similar lift setup but I what I meant to say if why did you have to do some grinding on the upper control arms the the lowers ?
Bro, are you from Riverside?
what lift kit is that?
Nice truck it’s my dream truck I wish I could have one but sadly my luck is running low
Yo don’t worry bro, it’s my dream truck and I got it 2 days ago you’ll get it just gotta work and wait
@@RodicaCatona I’m 15 and am gonna get one as my first vehicle ever.
Go on Iaa or copart there a little hit
@@mexcapalot8572 nice I just got one yesterday for my first car ever
They’re dirt cheap😭 u can get one for like 2000
Do you have a link of the lift you bought ? Is it a 6 inch or a 4inch ?
Likely a 4". Least that's the biggest I've seen. Just lifted mine. 4" blocks + 2" Shackles in the rear, 3" Risers + 4" Knuckles in the front, with 2" offsets all around, currently sitting 38" Lift all around, and still haven't put my 35s on er yet.
Turned out great. Do you remember all of the parts that you had to buy? I wanna do the same thing to my ranger and it would help me out a lot
* 33x12.50x15 wild peaks $900✅
* 15x10 pro comp $340✅
*
* 6in spindle lift kit
* 4in block kit
* front shocks $950✅
* Rear shocks
* Lifted coil springs
*
* Upper control arms $411✅
* Lower control arms $198✅
*
* Front wheel bearings $70✅
* Rotor and disc brake kit (F) $291✅
* Ball joints parts # k8738$120 ✅
*tune up $180✅
*window tint limo $180✅
i have the same ranger but i have one question. for your suspension you did 6in spindle lift kit and a 4in block kit, do you have to do the lifted coil springs or could you skip that
@@xannyjb9374 if you could reply asap that would be great!
@@alexnelson7661 sorry man as a matter of fact I did switch out the front springs as well
They came with the maxtrac kit
How did u do front bumper like that
I honestly just took off the lower plastic piece, came out great
I have a 2011 XL Ranger with 31's and I can say that it looks good but MPG went to CRAAAAAAP😄😄😄😄
What year its ur truck?
Bro can you please semd the link from where you bought the upper control arms por favor
doetsch-shocks.com/collections/a-arms
Thanks so much man bro canbi ask you a question listen today i met a guy who says he can fabricate upper control arms for my ranger he wants to do a few measurements in order to make them what do you recommend get the ones you bought or go with fabrication 450$ by the way for fabrication....thanks for taking your time
@@omartorres1615 the ones I sent you are honestly overall very well built.
@@xannyjb9374 thanks so much man i will go with same ones as yours
Como cuanto invertiste para esto
Muy buenas trocas tube una 99 3.0 buenísima
🔥🔥🔥
Do you have a link or something for the upper control arm?
doetsch-shocks.com/collections/a-arms
Thanks a lot
Big help
What size wheels and tires and how much of a lift?
He said in vid 33x12.5x15 rims 33x10
U bolts look installed backwards. Unless it doesn’t matter.
Oh nvm man I was looking at it wrong lol. Truck looks fucking sick dude
Hey bro I love the truck what year and make is it planing on getting one thx
Nice sub here ☺️☺️👍