FIRST DRIVE IN 15 YEARS! Followed by DISASTER: Range Rover Classic pt. 3
Vložit
- čas přidán 5. 01. 2024
- Yo Yellowtop? I Hear ya
Parts used in this video
Battery Connectors/Terminal Clamps - amzn.to/3HaDnE7
Fuse Panel - amzn.to/3RME1g4
Big Wire - amzn.to/3RWz3xo
Smaller Big Wire(blue) - amzn.to/3tKPbtz
Breakers - amzn.to/48qFT56
Carb Hat - amzn.to/47l9fk4
Blaster High Vibration Coil - amzn.to/3tIkG7x
MSD 6AL - amzn.to/3vixbaj
MSD 8910 Tach Adapter - amzn.to/47pAg5U
Join - czcams.com/users/builtofficialjoin
www.builtofficial.com
Instagram - / builtofficial
Tik Tok - @builtofficial - Auta a dopravní prostředky
What a heartbreaker! Don't worry- a lot of times we procrastinate because we don't know HOW to do something. Now you know you CAN do it, just have to do it again.
Yeah the car hobby is a toxic relationship. Highs are high and lows are well... I dont wanna talk about it. That 350z in the back thooo 👀
Why haven't I gotten recommended your videos?.. bell is on. Glad ur posting again. Got few videos to catch up on now at least 🎉
The Mercedes is underrated. Also, I thought the little..Sunbeam? sold.
NO MORE ROVERS (Unless, ya know, they get widebodied)
Don’t be discouraged brother! You’ve come so far, and learned so much. Engines are a wonder of mechanical genius that I cannot even begin to wrap my head around working on one, especially one built by Land Rover. Keep working hard you got this!
You have done 90% of it.
Its now just mechanical and you champ it. Just let it go and move forward the next day bruv. Trust in yourself as you always did❤
Factory defects happen on parts all of the time. Probably not your fault. 7 years with AAP, I've seen some stuff.
man thats rough.... sorry that its gone like that so far... just to let you know that its normal though i'll tell you this. I literally just got my vw bug's 1915cc engine done, installed and running. while tuning carbs it started jumping time... couldnt figure it out. days of looking, no answers, distributor changes, adjustments, new belts etc... bottom line, distributor brass drive on the crank shifted and wasnt engaging the distributor itself. (thus "jumping" time) had to pull it out, tear it all the way back down and rebuild from the crank up. it sucked, but its part of building cars unfortunately. 4 days later i got mine back in and fired back up. its not perfect, still working on its "bugs" but its getting there. keep up the good work!
Hey man I’m a subscriber since your MR2 days. I know a while ago you did videos on leaving CZcams, but I’m grateful you’re still producing content for us. Thank you
Keep up the grind. I’m looking to start my own channel and my biggest fear is that I’ll fail on camera. But cars are just one of those beast you can do everything right and it still fail, from bad parts to freak accidents. You got this man! You’re one of my inspirations to chase my dreams!
Keep up the good work, remember you are living someone else's dream!
Is that’s Chase??
Dang man. This is crazy. Good luck pulling things together
Dude - awesome vid series, I do feel w you re oilpressure situation and following consequence.
Will follow. Stay strong.
You did an amazing job!!!!!! Either way I’m in NC Asheville! I work on this cars if you need anything just let me know
The content we want.
Man glad you are posting more often again bro .. hopefully all works out for ya .. u think maybe a gasket went and hydrolocked it on ya? (Water in cylinders for thos who dont know what hydrolocking is).. besta luck bro , you got this .. peace and love bro keep it rad stay safe and build on l8z fam and have fun
Hold on! Was that Chase??
Damn! Haven't seen him in years since the Ratsun vids. Speaking of which... Where is the Ratsun?? Was it ever finished/driving??
Fatsun
Nice work brother!! I am currently working on both my 88 and 89!! The issue has been someone has butchered the wiring system!! Sounds bad ass!!!
So happy to see another video.
What's up. You probably won't remember me but a long time ago I've commented on one of your mr2 videos that your channel would be very famous soon. That was maybe 4-5 years ago? Im really proud of where you are now
A friend of mine wanted to change his transmission fluid, but instead he drained all of his oil, over-filled his transmission fluid, then drove it for about a mile, (with no oil) & blew his motor
Man I'm really sorry for you
Yoo, yellow top period 😂
Some things to consider. Did you replace the oil pump gear? Did you inspect the timing chain housing/cover assembly for wear/oil pump gear clearance? Did you prime the oil pump by packing it with Vaseline and using a drill to build up pressure? I don’t think it’s possible on these engines for the distributor to not engage the oil pump drive like on some engines. Also flat tappet cams require a critical break in procedure and you should also use an zddp rich oil.
This is correct, these engines will not prime themselves after a rebuild unless vaseline is packed into the oil pump gear. Ask me how I know.
I feel bad for you Bro, but you will fix it.
That’s a bummer dude, best of luck with it
No worries bro...we are just humans we make mistakes..but i know you'll fix it ..
Great work shame about the ending im sure you'll sort it out
You needed to fill the oil pump cavity gears with vaseline. Pump is not self priming.
You got a new subscriber
What happened to the sl
what model was used sniper efi ?
Find someone who makes an adapter to the LR transmission from an LS and junk that old engine completely.
Mine leaked because the thermostat slipped. Took me forever to find the source. Super annoying.
Just put a toyota Engine on it
Do not clamp braided lines to hard lines!!!
lol...wasting more good parts
If you're surprised it all works, maybe you shouldn't be working on cars....
Go away
@@daves_not_here_mannn no
@@1one3_Racing why be an ass hole?
I'm surprised it started w all that bullshit wiring all over....painful to see....but it ran long enough to seize...
@@bugeyev8 yeah. Thats a whoopsie. If my mechanic locked up my engine I'd be looking for a new mechanic!