Motorola Moto G Stylus 2020 XT2043 Battery Replacement

Sdílet
Vložit
  • čas přidán 4. 07. 2024
  • A step-by-step replacement guide on how to repair and replace a not working/charging battery on Motorola Moto G Stylus 2020 mobile phone.
    bit.ly/3QrCLzK - Premium Battery Replacement for Motorola
    Guides you May Like
    Moto G Stylus 2021 Camera Lens Glass Replacement • Motorola Moto G Stylus...
    Galaxy A12 Charging Port Replacement • Samsung Galaxy A12 Cha...
    Amazon Fire HD 10 2019 Camera Lens • Amazon Fire HD 10 2019...
    Redmi Note 10 5G Camera Replacement • Redmi Note 10 5G Camer...
    If our video was helpful, you can always support (for $1.99) us by becoming a member. A Joining Member will help us to create more variety of content for the community.
    CZcams Join bit.ly/3O7X5SH
    Tools
    Heat Mat bit.ly/3BvpFHm
    Portable Heat Gun|Stations bit.ly/44Y5NLp
    Philips Screwdriver, Tweezer, Suction Cups, Pry Tool Plastic / Metal / Card bit.ly/3FB2r5a
    Silicone Repair Mat bit.ly/3FKUc6K
    Glue | Adhesive bit.ly/3Dw2X4C
    Clamps & Essentials bit.ly/3Qvm3Qf
    Our Partners
    bit.ly/2FSFTPv ( Gadgets & Accessory Store - Ships Worldwide)
    bit.ly/2QRfYhP ( Phone & Tablet Replacement Parts - Ships Worldwide )
    bit.ly/3afejcf ( Phone, Tablet Parts & Accessory Store in The UK )
    Timestamps
    00:00 Intro
    00:10 Opening Moto G Stylus 2020
    00:40 Removing the back cover
    01:36 Removing Logic Board frame
    02:40 Removing not working Moto G Stylus 2020 Battery
    04:30 Placing New Moto G Stylus 2020 Battery
    05:10 Placing Logic Board frame
    05:45 Installing the Back Cover
    06:45 Closing & Binding Back cover
    #diyrepair#phonerepair #repair
  • Jak na to + styl

Komentáře • 21

  • @bigfatlazydork
    @bigfatlazydork Před měsícem +1

    Excellent video sir, thank you for your time and information!

  • @GidarGaming
    @GidarGaming Před 24 dny +1

    Careful when taking off the logic board cover. I accidentally broke the cable to the fingerprint sensor. Ordered a replacement that will hopefully be better as it seems the original started to lose the ability to pickup fingerprints properly over time. I probably used some chemicals to clean it that I shouldn't have... anyway, just a heads-up. The fingerprint sensor (and cable) doesn't just move out of the way on it's own... so you have to be careful how you pry out the logic board cover (even though for mine it took quite a bit of force even with no screws left).

  • @1blisslife
    @1blisslife Před rokem +1

    I wish you would told us first to avoid the ribbon cables under the battery or at least shown the back of the old battery to see where the "old" glue was placed. Looks fairly straightforward but those things could help some people. Thanks!

  • @osep5581
    @osep5581 Před rokem +2

    Having trouble taking off the back. Does it have to be well heated? Because I'm trying not to damage the phone, but it seems really impossible right now.

  • @russells9687
    @russells9687 Před rokem +1

    Where did the double sided "adhesive" to hold down the new battery come from? Took me by surprise and have no idea where to buy it.... Thank you.

    • @tlojewelrylove
      @tlojewelrylove Před 5 měsíci +1

      I noticed some of the batteries sold on Amazon included the tools and the two strips of double-sided tape needed to remove the old battery and install the new one. I'd imagine, if you had to buy the tape separately, you might need to make sure that it is heat resistant but that's just my logical thinking and not my tech experience.

    • @penetratingstain
      @penetratingstain Před 4 měsíci

      Why would you even use new adhesive for the battery? I wouldn't want to have to loosen it to replace it next time.

    • @russells9687
      @russells9687 Před 4 měsíci

      @@tlojewelrylove Thanks. I no longer own this phone. I do vaguely recall that I found the Amazon "tool kit" inside their packaging AFTER successfully completing all the repairs I was doing on the phone (including battery replacement). Ain't it always the way?

    • @russells9687
      @russells9687 Před 4 měsíci +1

      @@penetratingstain Good point. I recall thinking that after defeating the factory glue job, extracting the replacement battery from a little adhesive strip would be a piece of cake. It's all moot: I no longer own this phone.

  • @StickyKeys187
    @StickyKeys187 Před rokem

    would you advise doing that at 2:55 if you have a swollen battery?

    • @DIYGeardo
      @DIYGeardo  Před rokem

      No, Don't Do. Just Gently Pry the battery

  • @successfully3796
    @successfully3796 Před 8 měsíci +1

    What is the battery model number

    • @tlojewelrylove
      @tlojewelrylove Před 5 měsíci +2

      KX50 is the model number of the Motorola battery.

  • @hvymax
    @hvymax Před rokem +1

    What type of glue is used for the back?

    • @DIYGeardo
      @DIYGeardo  Před rokem +2

      We were using b7000, you can use t7000 or pre cut original adhesive

    • @mikgo3844
      @mikgo3844 Před 21 dnem

      Or. CYANOACHRYLAT GLUE👍 like crazy glue,watch ur finger😩👋

  • @Onur19O7
    @Onur19O7 Před rokem +1

    🙂👍🇹🇷