Dude, you did what I dream of doing. I don't mean by making a great step by step product, but by making it open source for the whole world. Thank you so much for your dedication and hardworking to make this possible. You are truly a inspiration.
Astonishing! In design and in execution. Just flawless. I couldn't get how that escape-like mechanism works, though (the one that ensures incoming filament is rolled evenly along the spool). Could you give some explanation? Thanks.
@@fu-opent Thanks, the "rotate an move laterally" bit is the part I didn't get. How it works for the leadscrew to reverse direction once either limit has been reached? For sure it has something to do with with the "escape" mechanism (as seen in clocks), but was curious on how you made it and neither of the videos show it clearly (it would be too slow anyways, unless you'd had spent some time on it, rotating it by hand).
I always chat with you through an interpreter. The screw rod reverses mechanically. When it reaches the boundary, the spring pushes off the Y-shaped structure to rotate in the opposite direction。16:06
This project carried out by you was wonderful, my dream is to be able to execute one like it, with such clean execution, only that in my country it is difficult at this time... congratulations, greetings
That's a great way Build the Filament extruder. Great work. Keep Posting. I have checked the ARTME support and unfortunately i cannot import to my country due to higher Customs Duty, So would like to know the Bill of Materials and parts which you have used to make this. So that i can procure locally and get my Hands on this DIY. Would you care to create a blog/page with Materials, electronics, firmware, etc for fellow DIY enthusiast?
How long did it take to produce 1 kg abs filament? Also once configured can you leave it alone so it can produce the filament or you need to stay with it all the time? Also can it produce pp filament? Which dryer are you using for drying the filament? And would you recommend this?
1kg (4-5 hours),Also once configured so it can produce the filament,PP filament has not been tested. It should be OK.The dryer is modified from my DIY tableware disinfection cabinet.😃
Nice to meet you, I saw your video of the filament machine, you are a genius, I congratulate you. I wonder if you could make a machine of this style, but only the injection part without the filament part is to make small production plastic parts in an aluminum mold. If you can please tell me how much would it cost?
Bravo! Jsi výborný konstruktér a stroj vypadá úžasně! 🙂 A děkuji za sdílení tvého díla!
Восхитительная работа, всё спроектировал, и железо, и электронику и всё это довёл до конца, браво!
am planning for a extruder machine myself and your take on it is by far my favorite so far. great work!
What a wonderful work!! And nicely put together video! Subscribed! Looking forward for more filament making videos😊
You need more likes mate! This is really well done and so neat and tidy. Good job!
Wow! Outstanding design! Please, keep it up and thanks for sharing 👍🏻
好強。
這可能是網路上的最好版本~~~
您做的非常好加油！👌
Awesome project, cool montage, congrats!!
thx for your video...its really inspiring. Good job and congrats.
Greetings from Germany
Dude, you did what I dream of doing. I don't mean by making a great step by step product, but by making it open source for the whole world. Thank you so much for your dedication and hardworking to make this possible. You are truly a inspiration.
Unbelievable! Awesome. Keep posting...
Awesome ! very nice project ! ☺️
you are genius..... Plastic threads are very expensive in my country This amazing machine is very useful
Amazing 👍 awesome work. Thanks for sharing ❤❤❤
真很好了。 感谢分享。 Pretty cool. thanks for sharing man.
Good job syncing each picture to the beat of the music. 😀👍
Carry on!!!!! this was amazing and looking to make my own! a follower and subscriber from here on out!
Awesome work mate 👍
amazing video! super project
Elegant design, great video
Outstanding！Well done
Excellent job👏👏👏👏👏
Genio, Inventor, CONGRATULACIONES..!!
Good job, incredible skill! Do you think it's feasable to make home made shredder to recycle prototypes?
Amazing job 🙏🏻😊
Super this lecture is very well sir
You are master of all trades! Like!
Amazing work !
Incredible Build. Your machine looks very Professional. Well Done.
Wow 🤩 U are so skillful! Amazing DIY project! I do want to build one myself. Is it open sourced?
what a beautiful thing to say, respect!
nice video thanks for sharing!
Good luck and best regards from the Netherlands!
Rob
Good luck
Creative video, thanks for sharing it :)
Шухляда з кнопочкою в гаражі - тепер моя мрія. Респект.
Very impressed... this is well thought out project with some wonderful ideas... thank you.
Excellent Work
Very very NICE !
😍 whoow, thanks for sharing your of your amazing experience brother! Beautiful setup of the whole project 🙌🙌🙌
Way better than lego in my early days!
класс! здорово! молодец! результат впечатляет. Дешево и сердито. есть место для совершенствования.
wow, it's amazing, you should have many more likes
This lecture is very nice
excellent work!
Artme and Now This!.. AWSOME!..
It shouldn’t be long now..
Amazing work.
Чел, да ты крут! Все спроэктировать да еще чтоб так мало места занимало! 👍👍👍
That looks so cool. Can you use this to crush and recycle failed prints and support ?
Ti stimo fratello!!! Sei un fottuto genio!!!❤
Its very nice Maschine , komplimento for You , lg Swiss mechaniker ❤❤❤❤
Astonishing! In design and in execution. Just flawless. I couldn't get how that escape-like mechanism works, though (the one that ensures incoming filament is rolled evenly along the spool). Could you give some explanation? Thanks.
You mean the looper? This is a mechanical operation mechanism. A motor at a fixed speed drives the upper screw to rotate and move laterally.
@@fu-opent Thanks, the "rotate an move laterally" bit is the part I didn't get.
How it works for the leadscrew to reverse direction once either limit has been reached?
For sure it has something to do with with the "escape" mechanism (as seen in clocks), but was curious on how you made it and neither of the videos show it clearly (it would be too slow anyways, unless you'd had spent some time on it, rotating it by hand).
I always chat with you through an interpreter. The screw rod reverses mechanically. When it reaches the boundary, the spring pushes off the Y-shaped structure to rotate in the opposite direction。16:06
You -are very talented engineer!/Вы очень талантливый инженер! Its a beautiful machine! / Это красивая машина!
This is amazing work
真的好強😊
Nice project. i have a question - can this device do filament from pet bottle?
This project carried out by you was wonderful, my dream is to be able to execute one like it, with such clean execution, only that in my country it is difficult at this time... congratulations, greetings
谢谢。你从哪儿来
@@fu-opent 你好 fu, 我來自委內瑞拉, 我在這乾了幾年，四十左右，願你多有成就
@@semillatech1791 Nice to meet you. I wish you a long and happy life
@@fu-opent the same for you, successes
你是男人中的王子。
这种慷慨使人类的未来成为可能。
Very Very good 👏👏
I want make it in real 😍😍
Great job bro you have earn subscribe.
Keep up
Ryuji: good to know that someone finally doing something about all the plastic on the planet.... Just brings a tear to my eye *sob*
You are best😮
Excelente trabajo,¿es de codigo abierto?¿como conseguir los planos?
great work 👍 👍
very nice my friend you are successful human
Cool idea!
you are an inventor!
Cool, thanks for Video
Félicitations pour votre création.
Very cool thingy!
That's a great way Build the Filament extruder. Great work. Keep Posting.
I have checked the ARTME support and unfortunately i cannot import to my country due to higher Customs Duty, So would like to know the Bill of Materials and parts which you have used to make this. So that i can procure locally and get my Hands on this DIY.
Would you care to create a blog/page with Materials, electronics, firmware, etc for fellow DIY enthusiast?
Nice work dude!
How can you take a screw and CNC parts?
Design of parts is opensource?
An ingenious use for the drill bit, great project. Please tell me the name of the software you use for design.
Solidworks
That's fn amazing! Thank you for making this vid and putting sick music in it. Have you included the soundtrack please!
贵在折腾。。。好有乐趣的DIY。。。
Obrigado para seu Trabalho, Você pode compartilhar os arquivos stl que você usou?
Congratulations beautiful, sorry where can I find the project for the 3d print desktop filament extruder
that's great mate, very good job. are you thinking of making a recycle crushing machine too . all the best.
WOW MAN! SICK!
Интересно было посмотреть на ваш принтер очень занимательная конструкция и решения
you rock brother!!
Very good!
Отличный аппарат! Когда-то то же делал себе экструдер, но из-за наличия дешевого пластика в магазинах, забросил это.
where are you buying the pellets from?
you are magnificent, my brother.
Cool ☺️☺️, is OpenSource?
Excelente muy bueno
Hello. It is open source? Where can I download the plans?
your design looks abit different than the original, what mods did you add/ edited
Very nice
How long did it take to produce 1 kg abs filament? Also once configured can you leave it alone so it can produce the filament or you need to stay with it all the time? Also can it produce pp filament? Which dryer are you using for drying the filament? And would you recommend this?
1kg (4-5 hours),Also once configured so it can produce the filament,PP filament has not been tested. It should be OK.The dryer is modified from my DIY tableware disinfection cabinet.😃
@@fu-opent期待做一期来自pp料的测试，谢谢！
congrats bro.
thank you buddy!
великолепное видео. Особенно ценники вначале
Which 3d modeling software do you use?
How much in total does it cost you to make this? I want to make it to
Great !! 🔥
Nice to meet you, I saw your video of the filament machine, you are a genius, I congratulate you.
I wonder if you could make a machine of this style, but only the injection part without the filament part is to make small production plastic parts in an aluminum mold.
If you can please tell me how much would it cost?
做得好! 很高興看到在亞洲地區的朋友有人實現出來這個開源項目!
我也在建構的路上，但由於使用的物件與他們相去甚遠，而他們似乎也只提供stl，大部分零件的檔案都要自己重畫，你是否願意提供給我你的CAD檔讓我參考，加速我打造自己版本的擠出機呢?非常感謝!!
cok mukemmel
Hello, can you sell finished product? What price would it be if so?
Super!