Spiral Bits - Compression VS Upcut VS Downcut VS Straight - Never Before Seen 19,000 FPS HD Video
Vložit
- čas přidán 28. 05. 2024
- Support What We Do at The Katz-Moses Store lddy.no/stih
In this week’s woodworking skill builder we’re talking about spiral router bits. Upcut vs Compression vs Downcut vs Straight Bits. We have TONS of high speed slow motion footage on the Phantom v2640 High Def Slow Mo Camera to help really drive our points home. Thank you to @bitsandbitscompany for supporting this one. I really can’t wait to see what you create! Let me know what you’d like to see next. Thanks for watching! Please like, comment and subscribe. Cheers!
Read the blog on this video: kmtools.com/blogs/news/spiral...
----
Support What We Do at The Katz-Moses Store- lddy.no/stih
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
PART #s
Astra Coated Compression ½” - 540-CM500
Compression ¼” - 425-CM250
Upcut Spiral ½” - 540-SRF500
Upcut Spiral 1/4” - SRF4-250
Downcut Spiral ½” - 530-DNC500
Downcut Spiral ¼” - 420-DNC250
----
Buy the Katz-Moses Magnetic Dovetail Jig: lddy.no/stiz
Taytools is my favorite woodworking tool source: lddy.no/e90a
I have Walnut Slabs for sale : lddy.no/stj0
Buy the Katz-Moses Stop Block: lddy.no/stiz
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Total Boat Epoxy: bit.ly/2I3Q8m4 10% Discount code JKATZMO
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Routers Video Playlist: • DIY Router Table Build...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Woodworking in SLOW MOTION Playlist:
• Slow Motion Woodworkin...
----
Tool Tune Up Thursday Playlist: • Tool Tune Up Thursday
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
The Katz-Moses Woodworking Apron: lddy.no/stir
My Favorite Dozuki Saw: lddy.no/stit
My Favorite Ryoba Saw: lddy.no/stiv
Marking Gauge: amzn.to/2nlXLuQ
Marking Knife: amzn.to/2nm39Ok
NEW Suizan Flush Trim Saw: lddy.no/stix
Stanley Sweetheart Chisels: amzn.to/2mVMTkF
Knew Concepts Fret Saw: amzn.to/2FUDbYZ
Dewalt Planer Package: amzn.to/2thEf6O
Forrest 10” Combo Blade: amzn.to/2Fdaee3
Festool Tape Measure: amzn.to/2oS3cjD
Starrett 6” Combination Square: amzn.to/2oP3dVw
Woodstock 3 in 1 Shoulder Plane: amzn.to/2FgAS1A
Stanley Low Angle Jack Plane: amzn.to/2oV4I4O
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
Abalone Inlay :amzn.to/2rjMTxe
Abalone Inlay Alternate: goo.gl/DHonFy
5 Minute Epoxy: amzn.to/2FijsSa
Triton 3 ¼ hp Router (with built in lift and edge guide incl): amzn.to/2LBw3Go
Kreg Router Plate: amzn.to/2A7oVNC
Triton Bushing Set: amzn.to/2A7pSpa
Bosch 1 HP Colt Router Set With Fixed and Plunge Base: amzn.to/2mHP1wY
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
----
Camera Gear:
Lumix GH5-s and main lens: amzn.to/2J49F7m
30mm Macro Lens: amzn.to/2GJXtTT
15mm Lens: amzn.to/2NafUox
50mm Lens I use for product shots: amzn.to/2mehs5y
Microphone: amzn.to/2IGjKIa
Lav Microphone: amzn.to/2Nb8SzY
Gimbal: amzn.to/2s9ZV0F
2nd CAMERA Canon 70d: amzn.to/2FiCEDq
Tripod: amzn.to/2HasNvK
Slider: amzn.to/2oNucSd
24MM Wide Angle/Macro Lens: amzn.to/2oSzzjh
50MM f/1.8 for those tight shots: amzn.to/2tpAoVm
10-18mm Lens for the wide shots: amzn.to/2FZrhNM - Jak na to + styl
*Support What We Do at The Katz-Moses Store-* bit.ly/KMWstore20
*BitsBits is the BEST place to buy router bits:* bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
*PART Numbers*
Astra Coated Compression ½” - 540-CM500
Compression ¼” - 425-CM250
Upcut Spiral ½” - 540-SRF500
Upcut Spiral 1/4” - SRF4-250
Downcut Spiral ½” - 530-DNC500
Downcut Spiral ¼” - 420-DNC250
I just bought a shop apron :) super excited to get it!
Newbie router guy here, thanks for the very helpful information. Just ordered the top compression bit from your guys, figured I won't have to think about that for a while! 12 buck discount, thanks again. I'll be back soon...
Ppp0pp
How would it work if I did a contour toolpath in 2 steps, and did a bit change mid way from a down to an up?
I don't think there's another woodworking channel that is able to educate so well on woodworking.
This has been the best video for describing the differences between the bits...and the high frames per second shots are fantastic!! 👊🏼
You are saying what I want to say
Prime example of a (moving) picture is worth a thousand words. Great, great, great!
I must say, you have utilized your time with the slow-mo camera beautifully. Even if this was the only footage you shot, it is impressive to see just how beneficial the frame of reference is while you're explaining every detail. Keep it up, please, this is just more motivation to work harder and upgrade to quality bits as soon as possible! ✌️
And we have like 5 or 6 full length videos planned with slow mo stuff still. Thanks bud
FINALLY someone used a high speed camera for content that was appropriate. The high speed was really useful, Thanks Johathan
A Very much needed video! I think many seasoned Woodworkers on CZcams completely mis the mark on what less seasoned workers actually call helpful content. Comparisons, demos, explanations, tool setup videos and videos like this are the most helpful in my opinion. Thank you!!!
My guy!
@@katzmosestools What about flush trim on a router table with spiral bits.... whats the difference on upcut vs downcut.
Outstandingly useful video, thanks Jonathan. The slo-mo make it so clear.
Thanks Jonathan- appreciate you taking a turn at providing these bits of information. Because you plunged into this subject the subject is far less splintered for me. Shear is a good video and you avoided taking knotty twist in your presentation.
Very punny! 🤣
This is one of your BEST vids, to-date, Jonathon! Great summary of all the different types of bits. That slow-mo tells it all. Unbelievable how much wood movement there is with the straight bits. Thanks for pulling this video together. Really, really love that slow-mo footage!
Amazing explanation .... small tip for whoever wants to start using spiral bits - if you want to experiment a bit and see which bit is best for your application before laying down your cash and buying one, get some HSS end mills - they are spiral bits that are used in milling machines and fit just as well in a router ... they are CHEAP AS HELL and an engineering supply house will have all sorts of shapes and sizes ,so you can really experiment before committing to buying a more expensive bit
Great explanation about the various bits and when to use them. And I am LOVING the slomo footage you guys captured. It adds amazing clarity to the examples.
Thx again! This is exactly the video I was asking about. Really appreciate! Great shots! Looking forward to the new apron!
Great job Jonathan!! As always great information and well made.
Thanks for the slo-mo! Really helps me understand which bit to use!
The high speed close ups were very helpful in illustrating what you were talking about. Very nice.
Quality content here - learned a lot from this! Thanks you for taking the time to demystify these bits and helping to step up our router game
One of your best videos yet! Combining education with entertainment is a formula for success!
J, thank you so much for making vids like this. I know many of us don't have the time to research and your vids are exactly what weekenders need to get the most of our time. Stay awesome.
Thank you! Made my decision pretty straightforward
Thank you for yet another outstanding, information, and USEFUL video. I, as well as countless others, really do appreciate the time and work you put into producing these quality, no BS videos with tips and advise we can actually put to good, functional use. Keep up the good work!
Well done again, Jonathon. Your videos are like a well planned cutting list; very little waste. I appreciate that. Keep it up, brother.
Nice footage! I've always wanted to show people how those bits work. Thanks for sharing.
Excellent video! Very informative, and great slo-mo footage of the bit action. Thank you!
Really fantastic footage, Jonathan! 😃
Thanks a lot for all the tips!!!
Stay safe there with your family! 🖖😊
Thanks for this video explaining bits. I’ve been looking at getting some good bits and it’s nice to know what they each do. High speed footage = awesome.
Could be your best video ever. Worth rewatching. And the high speed camera! Thanks.
Awesome video. Ton of great info in 12 minutes. Visuals and simple explanation are awesome.
so glad i found this channel, i have learned a lot and really enjoy these slow mo videos
By far one of the most useful videos on this topic. Seeing what the bits are doing really makes an enormous difference for understanding what is being described. Thanks!!
Such an informative video! The slow motion clips are incredible! Thanks for sharing!
Great video,and one of the best made footage i've ever seen.Congrats !!!
Probably the most comprehensive review with video (amazing video I might add) anywhere online. This really gives someone the best understanding of cause and effect (kinda like The Matrix second movie 😎)
Hahahaha thanks bud!
Super helpful! Great information! Thank you!
Great info, and the video really shows what’s happening. Thank you!
Thanks for sharing. I've been wondering about this very subject.
Probably one of the best videos I’ve watched on woodworking. And he is a gifted communicator and teacher.
Very useful and excellent video . Thank you
Excellent video, thanks!!!
Lots of really great information here. Thanks!
Great content and visuals. Really useful to see and learn something new! Thanks for posting this.
Really useful. Thanks.
Amazing video, extremely effective at getting your message across without the drivelling. You’ve cleared up an issue for me & gained a subscriber. Well done & thanks 🙏🏾
Great information Jonathan. Thank You.
Very concise and well explained. Thank you
Excellent content. Very informative
Top notch video! Your videos have really been giving me the knowledge and confidence I’ve been lacking in certain areas, like bit/blade selection for different cuts.
My guy!
Great video!! Very helpful and simple!
I only learned about uncut, downcut, compression bits a couple of days ago whilst looking at router bits on Amazon. Then, by sheer coincidence this video is on my feed on CZcams and what a spectacular job you have done in explaining them. Thanks.
That's is one heck of a depth of cut on the straight bit. No wonder the wood is moving.
The best explanation of spiral/compression bits I've seen. High speed photography is awesome.
Great video! Thank you!
Very useful and good explanation of main types of bits and their advantages and disadvantages . Kudos to the host!
Great video as usual. Thanks!
this is so helpful to understand different types of bits! thank you!
Brilliant video & ultimate quality. Thanks!!
Very well produced video! Impressive!
Gee you really love this new camera, actually so do I ! Great topic and video!
FANTASTIC!!!
That was such an awesome video. The demonstrations were amazing. I bought my first down cut spiral bit this year, l was amazed how fast and cleanly it cut. The biggest benefit was how much easier the router was to guide through the material. Your explanations were concise and very easy to understand too. Thank you.
Good intel, much appreciated.
Great video. Thanks mate.
Very well done! Great use of high speed.
Great content and perfectly presented!
Well done and thank you!
Awesome video...thanks!
You are a great teacher. All the info is presented concisely and clearly. You engage the viewer without being patronising. There's a touch of humour to keep the mood light.
The high speed camera work is good, too - it perfectly illustrates the point you are making. I can't imagine how the topic could have been better explained.
Wow great explanation video!
Great lesson, sir. A special thanks for the usage of slow motion camera that gave us a good comparison and good understanding, please do more this kind of things.
Great channel great info, great videos! Keep them vids coming!
Great video Johnathan, I enjoyed the slow motion which greatly explains how the bits are turning and what they are actually doing. I use compression bits and spiral upcut bits but I'm just getting started with these types of bits. Again, thanks for the video!!!
This is so good! All the information I need and more, and you aren't talking to me like I'm a child. Keep it up. I think I'll be spending the evening surfing your videos!
Excellent!
Super helpful video, thank you. Answered all the questions I had.
SuperFantastic!
Fantastic video. Many thanks for the slow mo video and detailed information.
Fantastic video JKM love the footage !! Thank you for doing this for everyone to see !
My pleasure bud!
Brilliant video loads of information.... great slo mo shots thanks
Thanks so much for making this video, really appreciate it! I’ve looked at the bits n bits site a few times and been indecisive about what to order! I’m in the U.K. so really want to get the correct order before I have it shipped. I can really see the quality in these superior router bits. Keep up the great work!
Just the most useful and informative YT I have watched for a while..👍
This is a really good video. I learned why my straight cutters were causing so much tearout, and that you can use down-cut bits for top-down routing to preserve the face-up from tearout.
You're review is amazing 👍👍
Very thorough and the slow-motion video was super helpful. Thank you.
Wonderful video! Learned a ton!
Really Great. Thank you so much.❤❤❤❤
As usual, great content ! thanks
Differences between these bits/endmills are always asked by newbies in the hobby CNC world. You can explain it to them, but visualizing it with those slow-mo shots is worth 1 million words when you can see what 16k+ rpm cuts really look like. Too cool! Awesome man. I'm sending this to everyone.
Friggin fantastic video.
Love the (not so) subtle stopblock product placement in the closeup shots.
Awesome content and instruction using the high-speed footage, thanks!
Ordered your woodworking tool apron, can't wait!
absolutely great video.
Great bits of information! 😃👍🏻👊🏻
Best video out there! good job bud!
Thanks for helping to end the confusion. Nice slo-mo!
Great stuff
Thanks .Always learn something on your channel. Ordered apron early, can't wait to get it.
Thanks for sharing that, well said!
Excellent video very well explained
Great Slow-mo shots !
What can i say... One of the best videos I've seen since I start woodworking. Thank you very much for sharing. Take care and Stay safe :)
Incredibly valuable information as usual.