Devongunsmith Diaries #36 Part 3: Caesar Guarini - Auto safety Action Strip-down
Vložit
- čas přidán 26. 03. 2024
- Devongunsmith Diaries #36 Part 3: Caesar Guarini - Auto safety Action Strip-down
This gun only came in for a quick stock bending job, it quickly became a long drawn out nightmare job, during my busiest time of the year!!
Broken gun stock, so not a quick turnaround! see Part 1
Stuck side-plates, delaying the work! see Part 2
Auto safety needing a strip down of action! see Part 3
Taking ages to get finished...
It turns out the gun had never been serviced in 8 years!
Please consider becoming a Channel Member and or get CZcams Premium
Either will help the channel to grow and continue producing content.
The Devongunsmith Diaries concept was conceived by me during lock down, and the premise was to be able to perform work without a fully set up gunsmiths workshop, but rather, using just the Cottage Kitchen Table, a few hand tools, some cordless tools, a table vice, and other small DIY tools.
While the channel is not specifically intended to be a how to guide, it is mainly for entertainment.
While in the UK gunsmithing must be performed by the Licenced Gun Trade, CZcams is without borders, and if the channel is useful to someone as either entertainment, or indeed helps you to decide if a repair might be possible, then I have been a help to you.
As an Amazon Associate, I earn a small commission from qualifying purchases, this helps to support the Devongunsmith Channel, The following are products I use regularly.
The Moly Grease I use is this one: amzn.to/46pJ4sP
Bisley do a smaller pack of Moly: amzn.to/45xNZqe
The lithium grease I also use: amzn.to/3tmh4rh
Light gun oil in a small pack: amzn.to/3LYRKOD
The Pipe Pliers use to make my custom coil spring pliers: amzn.to/46DzHFE
The Grace USA gunsmith turnscrews I use are these: amzn.to/45nIx9q
The Generic version of Mirlon or Scotchbrite I use: amzn.to/46rCGRT
Wheeler trigger scales I use: amzn.to/3S2sWJz
My 6mm stock bolt T bar for Beretta: amzn.to/3tuHkQt
Solvent Contact Cleaner, to use to clean the metal parts: amzn.to/3ZQW0FG
Browning Legia Gun Oil Spray: amzn.to/46qSUuB
Cold Blue Gel G96 which I use for touch ups: amzn.to/46PoykX
Cold Blue liquid smaller Bottle, which I use for complete bluing: amzn.to/3rLF4nt
Adjustable Hand Reamer Set 17-19mm and 19-21mm: amzn.to/3M1U4o1
Cutting & Tapping Oil Fluid:amzn.to/3FeMzWX
Dial Bore Gauge 18-35mm: amzn.to/3M18LHR
12g brass snap caps: amzn.to/46sVP5X
Stock Bolt Long Pattern Screwdriver: amzn.to/3PTFL6e
***************************************************************************
Music Credits:
Ethereal Guitars - Alexander Nakarada Updated 5 January 2024
Content owners: We Are Era Music BV
Alexander Nakarada is a talented composer from Norway, please check out his content:
/ @anakarada
/ anakarada
creatorchords.com/
/ serpentsoundstudios
/ serpentsoundstudios
alexandernakarada.bandcamp.com/
***************************************************************************
#colt1911
#12bore #shotgun #repairs #gunsmith #gunsmithing #gunfit
#fieldsports #fieldsportsbritain #waterfowlhunting #waterfowlhunting #claypigeon #claypigeonshooting #claypigeons #shooting #gunfitting#purdy #12bore #shotgun #repairs #gunsmith #gunsmithing #gunfit #purdy #beretta #miroku #browning - Jak na to + styl
wish you could fit my auto safety on my b525
I did ask you where your location was.... B525 needs modification to fit an auto safety.
Hi sorry i live in Northwich Cheshire @@devongunsmith4698
Northwich in Cheshire
The trigger can be totally removed?( like the beretta triggers that you find spares)
If it is adjustable*
question or statement!?
@@devongunsmith4698 it is a question sir. i've put "?"
Can a cg maxum be mead into auto safety?
You can add or remove the auto safety.
Thank you, I know I can ask the gun smith at the shooting club
What type of cost would you expect to pay?. I'm going to yes it as a game gun I'll use it as it is this season before deciding if to get it mead automatic safety
You clearly have the ideal temperament to do this kind of skilled work. I love watching it done but am also very happy to admit that it's not a job for the well intending amateur🫣🫣
Thank you very much!