Devongunsmith Diaries #36 Part 2: Caesar Guarini - Loosen Stuck Sideplates!

Devongunsmith Diaries #36 Part 2: Caesar Guarini - Loosen Stuck Sideplates!
This gun only came in for a quick stock bending job, it quickly became a long drawn out nightmare job, during my busiest time of the year!!
Broken gun stock, so not a quick turnaround!(Part 1)
Stuck side-plates, delaying the work! (Part 2)
Auto safety needing a strip down of action! (Part 3)
Taking ages to get finished...
It turns out the gun had never been serviced in 8 years!
Please consider becoming a Channel Member and or get CZcams Premium
Either will help the channel to grow and continue producing content.
The Devongunsmith Diaries concept was conceived by me during lock down, and the premise was to be able to perform work without a fully set up gunsmiths workshop, but rather, using just the Cottage Kitchen Table, a few hand tools, some cordless tools, a table vice, and other small DIY tools.
While the channel is not specifically intended to be a how to guide, it is mainly for entertainment.
While in the UK gunsmithing must be performed by the Licenced Gun Trade, CZcams is without borders, and if the channel is useful to someone as either entertainment, or indeed helps you to decide if a repair might be possible, then I have been a help to you.
As an Amazon Associate, I earn a small commission from qualifying purchases, this helps to support the Devongunsmith Channel, The following are products I use regularly.
The Moly Grease I use is this one: amzn.to/46pJ4sP
Bisley do a smaller pack of Moly: amzn.to/45xNZqe
The lithium grease I also use: amzn.to/3tmh4rh
Light gun oil in a small pack: amzn.to/3LYRKOD
The Pipe Pliers use to make my custom coil spring pliers: amzn.to/46DzHFE
The Grace USA gunsmith turnscrews I use are these: amzn.to/45nIx9q
The Generic version of Mirlon or Scotchbrite I use: amzn.to/46rCGRT
Wheeler trigger scales I use: amzn.to/3S2sWJz
My 6mm stock bolt T bar for Beretta: amzn.to/3tuHkQt
Solvent Contact Cleaner, to use to clean the metal parts: amzn.to/3ZQW0FG
Browning Legia Gun Oil Spray: amzn.to/46qSUuB
Cold Blue Gel G96 which I use for touch ups: amzn.to/46PoykX
Cold Blue liquid smaller Bottle, which I use for complete bluing: amzn.to/3rLF4nt
Adjustable Hand Reamer Set 17-19mm and 19-21mm: amzn.to/3M1U4o1
Cutting & Tapping Oil Fluid:amzn.to/3FeMzWX
Dial Bore Gauge 18-35mm: amzn.to/3M18LHR
12g brass snap caps: amzn.to/46sVP5X
Stock Bolt Long Pattern Screwdriver: amzn.to/3PTFL6e
***************************************************************************
Music Credits:
Ethereal Guitars - Alexander Nakarada Updated 5 January 2024
Content owners: We Are Era Music BV
Alexander Nakarada is a talented composer from Norway, please check out his content:
/ @anakarada
/ anakarada
creatorchords.com/
/ serpentsoundstudios
/ serpentsoundstudios
alexandernakarada.bandcamp.com/
***************************************************************************
#colt1911
#12bore #shotgun #repairs #gunsmith #gunsmithing #gunfit
#fieldsports #fieldsportsbritain #waterfowlhunting #waterfowlhunting #claypigeon #claypigeonshooting #claypigeons #shooting #gunfitting#purdy #12bore #shotgun #repairs #gunsmith #gunsmithing #gunfit #purdy #beretta #miroku #browning

[@timfinlay2174]

I'm getting tense watching this.

[@devongunsmith4698]

😂👍

[@bernieinsaudi]

2 layers of Blue painters tape. CA glue, temporary wooden block glued to side plate. Tap it off. Remove blue tape.

[@bernieinsaudi]

Look up blue tape and superglue… CNC part fixing.

[@devongunsmith4698]

I’m familiar with the technique, but they were completely stuck. 😂

[@bernieinsaudi]

@@devongunsmith4698I had sweaty palms! 😂

[@devongunsmith4698]

@@bernieinsaudi not my first rodeo.. but first time recording such a job..
The additional stress of filming most jobs is another level of sweaty palms 😂