DIY Volkswagen Passat CC Logo Projector Lights Puddle Lights Golf MK 5 MK6 Tiguan

Sdílet
Vložit
  • čas přidán 24. 08. 2024
  • It seams I made an error.
    On Passat CC: - for the front doors connect red to 18 and brown to 19.
    - for the rear doors connect red to 6 and brown to 18. -----------------------------------------------------------Check the tutorial for the rear doors:
    • Montare Proiectoare Lo... Ro
    • How to Install VW Volk... ENG
    In this video we are going to show you how to install and activate door logo projectors on a Volkswagen Passat CC. This also applies to Volkswagen Passat,MK 5, MK6 and even Tiguan. It is a very simple operation that takes less than 15 minutes for each door and the end result is pretty cool. You won’t need many tools but a diagnostic software is mandatory to activate the lights. The projectors are very cheap , you can order them online and activating them is realy easy so there is no reason why yous shouldn’t do this job yourself instead of paying a specialized car shop.
    Disclaimer: The content of this video is available for informational and educational purposes only. It is not intended to be a substitute for the professional advice of a mechanic who has personally inspected your vehicle. Wannabe Mechanic and any sponsors of this video assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Wannabe Mechanic recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Wannabe Mechanic, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Wannabe Mechanic.

Komentáře • 39

  • @bobruiz1242
    @bobruiz1242 Před rokem +3

    Thank you ! I'm gonna order some and try it soon

  • @davecoshan9734
    @davecoshan9734 Před rokem +1

    Great video guys. Where did you get the diagnostic software from ?

    • @TheDIYWorkshop2020
      @TheDIYWorkshop2020  Před rokem +1

      You know how it works, you can find a lot of stuff online. I can not recommend our ways :)

  • @zahariaradu3144
    @zahariaradu3144 Před 4 měsíci

    Hi ! I would like to know what kind of cables should be used for the front doors to connect the two logos. Should different cables be used for the back? I understood that the tip entering the mode is different from the back

    • @TheDIYWorkshop2020
      @TheDIYWorkshop2020  Před 3 měsíci

      O să facem un tutorial și cu activarea pe spate săptămâna asta. Am presupus că ești român după user.

  • @jorjdevatra
    @jorjdevatra Před 3 lety +2

    Multă treabă 😊

  • @taaaizA
    @taaaizA Před 4 měsíci

    Love the vid! However as a DIY VCDS is a little bit expensive for me, ive seen obd2 scanners such as obdeleven which can access modules but that one requires monthly payment.. Any cheaper substitute? Thanks!

    • @TheDIYWorkshop2020
      @TheDIYWorkshop2020  Před 4 měsíci

      You can find cracked versions of VCDS super cheap. Multi brand diagnostic tools can 't do this.

  • @bordeimarius8563
    @bordeimarius8563 Před 3 lety

    Bravo, keep it up guys!!!

  • @psndse
    @psndse Před rokem +1

    Can you do this on the rear doors as well?

    • @TheDIYWorkshop2020
      @TheDIYWorkshop2020  Před rokem

      Yes you can, but you will have to search for other tutorials on youtube. We haven't had the opotunity yet.

  • @leej1396
    @leej1396 Před 2 měsíci

    Link to where you bought the lights and wires from ???

  • @tomasbernotas3852
    @tomasbernotas3852 Před 3 měsíci

    Hello, does It mean all doors need to connect 6 and 18 also and rear doors? Thank you for your answer

    • @TheDIYWorkshop2020
      @TheDIYWorkshop2020  Před 3 měsíci +1

      I checked this old video and it seams I made an error.
      On Passat CC: - for the front doors connect red to 18 and brown to 19.
      - for the rear doors connect red to 6 and brown to 18.
      We will do a tutorial for the rear doors very soon.

    • @tomasbernotas3852
      @tomasbernotas3852 Před 3 měsíci

      @@TheDIYWorkshop2020waiting for your new videos :)

  • @Muxik4k
    @Muxik4k Před 4 měsíci

    How can i do it, if i dont have the VCDS? I only have USB versions.

  • @amirlisic345
    @amirlisic345 Před 2 měsíci

    I did it on front doors ,but on rear side plug is different , how to connect on rear ?

    • @amirlisic345
      @amirlisic345 Před 2 měsíci

      I did the same thing

    • @TheDIYWorkshop2020
      @TheDIYWorkshop2020  Před 2 měsíci

      Check the description . I left a link to the tutorial for the rear doors. Or enter this one czcams.com/video/ruFMeoJuPMo/video.html

  • @mathieufilaumart6243
    @mathieufilaumart6243 Před rokem

    It's the same think for Scirocco ?
    With mk6 golf plateform

    • @TheDIYWorkshop2020
      @TheDIYWorkshop2020  Před rokem

      On Ali Express it says it is compatible with : VW Teramont 2017- VW Touareg 2011-2019 VW CC 2009-2019 VW T-ROC 2014-2019 VW Arteon 2017- VW Phideon 2016-2019 VW Sharan 2012-2019 VW Magotan 2007-2019 VW Passat 2005-2020 VW Golf 2010-2018 VW Sagitar 2006-2017 VW Tiguan 2010-2017 VW EOS 2008-2015 VW Scirocco 2009-2017 VW Jetta 2006-2014 VW Touran 2016-2018 .We did not have the chance to install it ourselves on scirocco so I can't say for sure. Thank you for watching.

  • @Belle1337
    @Belle1337 Před měsícem

    How do you connect rhe passengers side?

    • @TheDIYWorkshop2020
      @TheDIYWorkshop2020  Před měsícem +1

      For the rear doors you mean? I made a different tutorial. It's in the description of this one or you can find it on the channel.

    • @Belle1337
      @Belle1337 Před měsícem

      @@TheDIYWorkshop2020 Actually I mean passengers side but I was looking at many different tutorials and I mixed up the Puddle lights and footwell lights🤣. Do you know how to connect passengers side footwell light?

  • @gringo81mr
    @gringo81mr Před 4 měsíci

    hello does it work for passat cc 357 2011?

    • @TheDIYWorkshop2020
      @TheDIYWorkshop2020  Před 4 měsíci +1

      Before buying the lights check the specs as they should give a list with supported makes and model.

    • @gringo81mr
      @gringo81mr Před 4 měsíci

      @@TheDIYWorkshop2020 Thank you

    • @gringo81mr
      @gringo81mr Před 4 měsíci

      ​@@TheDIYWorkshop2020 I meant whether these harness connectors are the same in the pre-facelift Passat CC?I'll be doing it in a right-hand drive car.

  • @StudmanBelfast
    @StudmanBelfast Před rokem

    Would this work same for the Volkswagen Scirocco?

    • @TheDIYWorkshop2020
      @TheDIYWorkshop2020  Před rokem

      I honestly do not know. If there aren't any tutorials out there for this make and model I wouldn't bother. Also some viewers found that this doesn't work on newer Tiguans.

  • @gabiasi
    @gabiasi Před rokem

    Am încercat să montez același lucru pe un tiguan model 2018, dar nu funcționează în pinii pe care i-ați folosit voi, la mine nu are pini scoși la 18-19. Posibil sa fie diferit.

    • @TheDIYWorkshop2020
      @TheDIYWorkshop2020  Před rokem

      Foarte posibil. Mulțumesc pt informație. Cineva a întrebat dacă merge la un Sirocco dar chiar nu am încercat.

  • @dsaonline
    @dsaonline Před rokem

    Work for a tiguan 2015?

    • @TheDIYWorkshop2020
      @TheDIYWorkshop2020  Před rokem

      Someone said in a comment that it didn't work on a 2018 Tiguan but we haven't tried it yet. Sorry !

  • @Calin.Serban
    @Calin.Serban Před rokem

    Salutare! Esti din Bucuresti ? As vrea sa montez si eu aceste lumini pe un golf 7 :D

    • @TheDIYWorkshop2020
      @TheDIYWorkshop2020  Před rokem

      Suntem din Călărași. Sorry! Sunt destui în Buc care te pot ajuta.