Nice little tutorial, just fitted a front pair on my 2012 mk6, with the new version of VCDS, using coding helper and selecting bit 3, it gives you a list of items to enable making the coding easier :)
I did it on a passat b6, thank u, i coud not done it without your video........ One thing, i did all work, but lamp did not work until i engaged ignition, after, all is perfect.
Great job! But one of the wires I bought is orange and bronwn, and the other is orange and grey, which one is the positive and which one the negative? Can I activate the function with the vagcom before connecting the wires to see if it works while I'm doing the job or firstly I have to connect the wires and then activate with vagcom? Thanks for your tutotial👍
Hi friend, excellent video. A question, I have these ceiling lights or micas but they are LED, not a normal bulb, can they also work with this configuration and not turn on on the dashboard like a burned-out bulb? Regards.
Good day, I filled in the door handle lighting inside the car with the code here from the video. You don't know what code I can use to turn them on again? Thank you.
Josef Vlogs Is your VW the European or North American version? The reason I ask is because I own a 2014 Passat (North America version) and I installed the door welcome lights with VW logo and I did not have use the VCDS it was a plug in and go type of install.
Great tutorial! Is the option for the puddle lights always available or are there versions of door electronics that are not? In the last case it would be easier to check first if that option is accepted when you program it. This could potentionally save you a lot of work.
Hello. I have a Golf 5 from 2003. On the front doors my windows regulator motors doesn't have the pins installed. On the driver side with part number 1K0959793C, only have the 19 pin. On passenger side with part number 1K0959792C, the 18 and 19 pin is not available. Is there other way to install the door warning lights without these pins?
hello is the same connection for the tiguan year 2012 On pin 19 negative, my vehicle already has a connector, can I connect it there? is it the same encoding for vw tiguan with vcds??? Thank you
hi, i was just wondering if you have tu unplug the battery for this install? i just ordered lights like that but with the logo pointing down on the ground when the lights turn on :) ty for the vid helps me alot when its time for me to install it :)
I have the same as you where just the logo points down without the software. Just installed it watching this video and the lights don't even turn on lmao.
I did this and it worked on my driver side door but my passenger side door worked for a couple minutes then stopped now its only reading 8 volts on my multimeter what could cause this amd how do I fix it?
Please help. Gen2 module to activate at the two rear doors? Driver and passenger door work well but none of the rear doors are good, VCDS okay! 4.pin and 14.pin (pin 14 busy) Any idea I can help, thank you.
Hi VCDS software comes with its own cable you cant use any kind of obd2 cable with VCDS. When you purchase the VCDS it includes the software and cable.
Nice little tutorial, just fitted a front pair on my 2012 mk6, with the new version of VCDS, using coding helper and selecting bit 3, it gives you a list of items to enable making the coding easier :)
Thank you for the feedback! 👍
Great description, all pins worked great on 2013 Comfortline Jetta 🎉 Thank you very much for the detailed video 😊
Great to hear!
Best VW puddle lights video
Thank you for the nice feedback! 👍
I did it on a passat b6, thank u, i coud not done it without your video........ One thing, i did all work, but lamp did not work until i engaged ignition, after, all is perfect.
Glad to help! Thank you too for watching!
Excellent video friend, I'll do it on my vw Jetta Variant.
Thank you.
A hug from Brazil
Daniel Meza Thank you for watching our video! 👍
This tuto work perfectly on my golf 6R 2010. NICE JOB!! 👍🏻👍🏻
petitboy77 Thank you for watching!
To install the interior door handle light, which pins belong to positive and negative? Thank you
For mine, 19 already has a cable, I'm golf mk5..not sure what to do there
Hi, this is the Best video I have seen but my car Passat 2013 are the codes are the same or what thank you
Hi, It should be the same.
In this video you worked on the right what about the left ?are we working again and the same ode ?
Great job! But one of the wires I bought is orange and bronwn, and the other is orange and grey, which one is the positive and which one the negative? Can I activate the function with the vagcom before connecting the wires to see if it works while I'm doing the job or firstly I have to connect the wires and then activate with vagcom? Thanks for your tutotial👍
Hi friend, excellent video.
A question, I have these ceiling lights or micas but they are LED, not a normal bulb, can they also work with this configuration and not turn on on the dashboard like a burned-out bulb? Regards.
Thanks for the informative video. But how do you know which wire is + (pos) and which - (neg) ? I bought mine ready made up
Youngyy You can try it on your car battery to find out wich one is plus + and -
TUTORIALE AUTO I tried it on a 9v battery but works either way round.
Hello there, how do you worked out which Wire was hot and ground on the light SIDE?
Mine comes ONLY with a 1 and 2 number PIN?
nice tutoriale...Thanks
Good day, I filled in the door handle lighting inside the car with the code here from the video. You don't know what code I can use to turn them on again? Thank you.
Update for jetta 2016 work?
Hi,this is the Best video I have seen but my car Passat 2013 are the codes are the same pr what do I do thank
Josef Vlogs Is your VW the European or North American version? The reason I ask is because I own a 2014 Passat (North America version) and I installed the door welcome lights with VW logo and I did not have use the VCDS it was a plug in and go type of install.
Godlike tutorial thanks a lot!
Miggel Thank you for watching!
TUTORIALE AUTO cause of your tutorial me lights are now working and it looks amazing
Miggel Glad to hear that! 👍
Need help with a 2014 gli harness
Great tutorial!
Is the option for the puddle lights always available or are there versions of door electronics that are not? In the last case it would be easier to check first if that option is accepted when you program it. This could potentionally save you a lot of work.
Not all the cars have puddle lights.
Do i need to use program after installation? Golf MK6 2009.
Yes
Great job 👍
it's 18 and 19 for the right and left door ?
Nice tutorial mate!
Rafaël Brender à Brandis Thank you for watching!
Is it the same thing for the rear doors
Hi! For the rear doors we have another video: czcams.com/video/uH7USffNvHg/video.html
Will this work for the ones in the rear doors????
Never mind, found your video for the rear doors..
VERY helpful video like always.I have only problem because my pin 19 is busy? What to do in that case
Did you find out?
Hello.
I have a Golf 5 from 2003.
On the front doors my windows regulator motors doesn't have the pins installed.
On the driver side with part number 1K0959793C, only have the 19 pin.
On passenger side with part number 1K0959792C, the 18 and 19 pin is not available.
Is there other way to install the door warning lights without these pins?
Hey mate, you ever found out?
Does Golf MK6 1.4 TSI DSG work in 2011 model?
Hello my friend ,
which odb cable do you use
I have a golf mk5
which cable can you advise me?
thank you for your video that you share
Hi! You can buy VCDS cable it’s very good for all VAG (vw, audi, seat, skoda).
Hi, is this work for 2018 vw passat? And please describe how car is connected to that software.
Hi, thank you for the video! I have 08’ Golf GTI and is it same pins for my car? 18-19
RedSun Hi, we don’t know for sure because we did not work on a GTI model. But it has to be the same if is the same module.
@@Servicetutorials do you have a vid for the rear
Same procedure for Audi A3 8V or i'll have to go 16+/5-?
hello is the same connection for the tiguan year 2012
On pin 19 negative, my vehicle already has a connector, can I connect it there?
is it the same encoding for vw tiguan with vcds???
Thank you
Hello! It should be the same. You can connect to another pin. I don’t know if it’s the same encoding.
Have you got the genuine part numbers for the front lights and looms?
How do I install it on the passenger side? The passenger side does not have that connector with all the wires ? 2017 Jetta Se
I have a problem, the brown wire is already there. What should I do?
My friend how about the connection for
The other doors?
Passenger door should have have connector. If not. Use pin 4 for + and pin 14 for - opposing sides.
hello in which pin should I close plus and minus on the rear door
Hello! You can see here: czcams.com/video/uH7USffNvHg/video.html
Do you have the position for the wire for de backdoors
any help with the cable connection with vw tiguan 2015 model?
Hi
Is this the same connection for a mk3 scirocco please
Hi. Does the programming process work with 2 door mk6 golf too? Or only for 4 doors?
Hi! I think it’s only for 4 doors.
Salut! La fel se face si pentru usile din spate? Adica se introduc firele in acelasi loc? (pin 18 si 19)
Salut! Pentru usile din spate avem alt video. Vezi aici: czcams.com/video/8yApVNMidxI/video.html
which usb wire you used to connect your computer to your car
thank you
Hi, just a quick question, can i split the positive and negative of the electric window if I dont have VCDS for coding? Thanks
hi, i was just wondering if you have tu unplug the battery for this install? i just ordered lights like that but with the logo pointing down on the ground when the lights turn on :) ty for the vid helps me alot when its time for me to install it :)
ive seen people doing it without the software tho, is it really nessecary for the software things? and what happens if you dont do that part?
Hi, how did it go? I'm planning on installing the projector lights into my vw golf mk 7.5
@@richardpenilla5782 it went well. Nothing crazy. Sold the car tho haha
I have the same as you where just the logo points down without the software. Just installed it watching this video and the lights don't even turn on lmao.
I did this and it worked on my driver side door but my passenger side door worked for a couple minutes then stopped now its only reading 8 volts on my multimeter what could cause this amd how do I fix it?
How do you chan the software codes? Is this something I can do at home or have to take to a garage?
Please help. Gen2 module to activate at the two rear doors?
Driver and passenger door work well but none of the rear doors are good, VCDS okay! 4.pin and 14.pin (pin 14 busy) Any idea I can help, thank you.
Hi, I did exactly like you on the MK5 and my lamp only lights up at the first stage of closing..do you have any idea why?
Hi are the pins for the connector 18 and 19 the same for vw eos 2007 please I would appreciate it if you can help out
Hi! We don’t know, we did not install on Eos. Sorry!
@@Servicetutorials it's okay I figured out how to do it I just jumped it from puddle lights 😅
@@calvindolcy6420 Good! 👍
Bro How to fix on passenger side???Please inform
Same as driver side v
Does the vcds code work on all makes and models?
J S No, it’s not the same. The value for each car can be different. But you can add 64 to you value.
Hi. Would this work with a 2007 seat leon mk2?
Hi! Yes.
Salut
Dacă pin ul 19 este ocupat cu alt fir ce trebuie facut
Salutare, ai aflat ce e de facut?
Bună, a rezolvat cineva această problemă?
The other door?Passenger
Here it is: czcams.com/video/uH7USffNvHg/video.html
Hi then I made coding for passat b6 my driver side windows button which opening driver window opening pasanger window
posterior door ??? pin??no video??
czcams.com/video/uH7USffNvHg/video.html
What kind of cabel have you use to connect the pc and the car?
Vcds
Thanks for video. My friend ı have passat b6 2008 comfortline this video is compatible my car full..
This all looks easy when you cut all hard parts out👎🏼
All that just to run the wires!? Better to get the same ones but battery operated.
Hello my friend ,
which odb cable do you use
I have a golf mk5
which cable can you advise me for vcds?
thank you for your video that you share
Hi VCDS software comes with its own cable you cant use any kind of obd2 cable with VCDS.
When you purchase the VCDS it includes the software and cable.