Work Flow | Milesto Elaine M3 Espresso Machine | EM19 M3
Vložit
- čas přidán 9. 09. 2024
- Milesto Elaine M3 is a dual boiler set up. It has a larger brew boiler and a smaller steam boiler connected to the thermal block which produces the steam.
Anyway for a budget of SG$800 and below, it will be quite hard to find any machine to beat its price and functionality.
A heat exchanger will cost easily SG$1900 to SG$2600. A dual boiler will cost even more.
This is a very interesting machine and the finishing is good for its price tag.
Thanks for the video! Nicely done.
Thanks you!
Thanks
I'm not sure this machine and the em19m2 "irina" have the exact same steaming element inside? I'm eyeing for the m2 and wonder if the steam power is good enough. My expectation is very close to the heat-exchange machine... I need high power steaming.
The price difference is not that big between em19m2 and m3. Go for m3.
I don't think you need a larger pitcher maybe you are just frothing the milk in favour of the filming angle, just be square to the steam wand it will be fine
Mine just arrived. Does your steam knob turn a little off center? It bugs me a little bit.
i didnt really pay attention to the steam knob
Hi CY, between this and CRM3007L / Turin Legato, which one is gives a better performance?
They are the same.
In my country they almost have the same price as breville bambino plus. Would you recommend this one over the bambino for home use?
Is more manual than the bambino and bambino to me looks like a plastic toy (but dont get me wrong, its producing good shots) and 58mm portafilter vs 54.
Hi! Is the pressure in this coffee machine 9 bar????
Usually is higher than 9 bars but this machine's opv can be adjuated to be capped at 9 bars. I didnt adjust mine but use the grind size to control the pressure.
Hey CY, just wanted to ask, as an entry-level machine would you recommend the EM23 or the EM19M3?
entry em19m3 is good enough...more than just good enough.
Hi I am using Em19 also , why the Puck with remaining water on top of it and get so wet? TQ
Can you compare EM19m3 vs gemilai 3200h ?
In my country both are the same price.
Thank you.
Hi we have no intention of bringing the CRM 3200h as its simply too bulky. I prefer the EM19M3 for its powerful functions and small footprint.
@@CaffeMartellaSingapore thank you for your answer CY.
@PINYO_B2 my pleasure and welcome!
Hello, just wanted to check where you got your portáfilter from? Just wanted to get something that fits my machine(same model as yours)
we have our own suppler to manufacture the portafilter for us.
Hello friend. Now I have crm3605, make sense to change it on milesto m3 (this machine)? Thank you
Definitely. Much better quality.
@@CaffeMartellaSingapore thank you!
@@KostiKo1 welcome my friend.
CY, does this machine have a rotating pump
Hi Steve, this one has a silent vibratory pump.
Hi CY, I am looking to get a Gemilai coffee machine CRM3605 and potentially a DF64 single dose grinder. Still thinking if this is the right choice as an entry-level, any thoughts?
CRM3605 is a good entry level espresso machine. That is ok. DF64 is a cost effective but Pro level grinder. It's price is good and grind is excellent. You can save on espresso machine. My suggestion is never save on a good quality grinder.
@@CaffeMartellaSingapore awesome, i’ll take it. Will look around and start placing order. Thanks for your reply, keep up your good work! Learnt good stuffs from this channel.
@@CalLim_8 You won't regret either, especially the DF64
Hello sir. Can this produce 100cups per day?
Does the brew boiler set right above the grouphead (or eaturated)?
Why not show how easy or hard it is to open the machine and show us how it looks inside ?
Have you tested how accurate the brew temperature?
The machines are sold already. And yes, this is a saturated group head.
are there any links to that grinder I've been waiting for a premium grinder that does wt. dosing.
Hi whats the preset OPV on this? and how to adjust the pressure of the brew?
Can share the needle distributor and tamper details. Do you sell?
Yes we do.
Hi sir, does it have below functionality:
1) Pressure gauge
2) PID control
3) Pre infusion
1 and 2 yes, 3 no.
Are there many plastic parts?
The water tank is plastic, the water tubing is rubber. the steam switch is wrapped with rubber/plastic material. Machine body, drip tray they are all stainless steel.
Ok. Sounds very good then. I think this would be something reliable to use in a slow bar. Thanks!@@CaffeMartellaSingapore
Can I set this up in a small coffee tent? Around 30 to 50 cups a day or if I may ask a recommendation?
Yes it's possible.
Can this do back to back shots?
Of course
Hi, I am currently using Breville Barista Express. Is this machine considered an upgrade? I am looking to pairing it up with DF64 single doser grinder.
This is not just an upgrade. This is a whole new experience and it works the same as Breville Dual Boiler and more powerful. Barista Express is entry level consumer machine. Em19m3 is Prosumer use machine. It is definitely a very good pair with DF64.
@@CaffeMartellaSingapore the 2 switches on it needs some work. Haha. Any other grinder you would suggest?
You can expect much from a $700 plus dual boiler machine. DF 64 is good at that price point
Eureka Atom also at 64mm
EM19M3 , or garggia classic pro. both over here ,almost same price. How important is PID.
Quite important. You can see people modding the Gaggia Classic to have the PID mod.
Is it possible to diy and change pressure to 9 bars?
Yes it's vert easy to adjust
On scale of extraction from 1-10. Can u
Rate for gemilai 3605, em18, em19m3
Gemilai 6
EM19M3 8
EM18 (I dont sell them and hence I cannot comment)
Hi,
I actually bought the machine after your review and see the milk steam is powerful.
its been 6 months i have been using the machine, but the milk didn't stir quite well .
Before this i been using Gemilia 3605. I feels like the steam for 3605 is better.
Is there anything that i miss out. Thanks in advance
you may want to clean the steam tip
@@CaffeMartellaSingapore i already give a try cleaning and descale. but still the same. but thank you :)
What grinder you are using in this video?
That is the RF64W weight dosing 64mm flat burr grinder.
how does it compare to other italian and german machines in terms of quality ? especially durability
It's is no inferior in terms of quality. It's cheaper just because the cost in making them is lower. The Milesto machine is good.
@@CaffeMartellaSingapore which one should i get gaggia classic pro or this? They has the same price here in Jakarta
@@edzen6122 I don't know about Gaggia classic pro but I can stand for the Milesto EM19M3.
@@CaffeMartellaSingapore thanks so much
@@edzen6122 welcome!
Hello, just want to ask you about the work flow speed. Mine flows like a waterfall, over 60ml in under 20 seconds. Did you modify your machine to change the flow speed?
Hi there..no mod on flow. Just grind setting.
@@CaffeMartellaSingapore Thanks for the reply. Did the pressure gauge go into red zone at your grind setting?
@@bussianrias3526 nope . I think it's the grinder and setting. Which grinder are you using?
@@CaffeMartellaSingapore I see, should I go with the finest grind setting?
@@bussianrias3526 you can try to adjust the grind setting to hit that golden ratio of 1 : 2 ratio where if you use 18g of beans, you are expecting 36 to 40g of espresso in about 30 seconds. If that grind setting you have gives you that, that is the setting you will use for that particular beans.
Do you have a video of milesto em30?
Not yet, but I will make one soon in the future.
Is it better than gaggia classic pro?
Definitely. It's factory installed PID and can brew coffee and steam milk at the same time. Zero waiting time between the 2 functions.
Different between m2 & m3 ?
em19 m3 has pid m2 don't have
Can I order if I’m from the Philippines?
It's possible but will need to check the shipping cost to Philippines.
What is different between EM19M3 vs EM20 ?
Boiler Size.
跟惠家270s哪个好
不能比较, Barsetto BAE02 是双热块，磨豆机一体式， 家用型。 惠家的是比较接近商用的。
@@CaffeMartellaSingapore 对比迈拓M19 3呢
@@Wang0204x 我只能这样说. 以内置磨豆机来说，barsetto bae02 是佼佼者. Em19m3 和惠家 270s 就有的比较。
@@CaffeMartellaSingapore 请问M3和270哪个比较好啊？谢谢
This or Gemilai 3018
Confirm 100% Milesto EM19M3.
@Caffe Martella Singapore how come? By the way, have you modded this machine since you got it? Easy to work on?
@@farzshmarz no mods. Gemilai 3018 is a lot lower end than EM19M3. 2 machines cant be compared. No doubts the ability to produce 3 to 4 shots is ok on the 3018 but the EM19M3 is just a lot better built than 3018.
@@CaffeMartellaSingapore thanks! I'm here in china and the price is almost the same for us.
@@farzshmarz go for em19m3