I’m trying to build the pf9ss quick question did you use the 43 oem lower parts kit or the 43x oem lower parts kit I see ur running the 43x slide so was wondering which lower part kit did u run??
I didn't do anything special to it so it would fit. Your 43 slide should work fine on a pf9ss frame. Sorry you're having trouble and I can't be more help.
Hey, getting a failure to reset the trigger. Using dummy rounds I’ll put the mag in, rack it. And nothing. It might do that the whole mag. If I baby it forward there’s no issue. Trigger is fine. Any idea?
It sounds like the trigger bar isn’t engaging the sear correctly or at all. You need to visually verify that. Look through the back of the slide at about .75”-.5” before the slides in battery (they make short clear back plates just for this), use a light and see what’s happening. You can bend the sear (cruciform) but not a whole lot… make sure all the pin holes are where they should be. Try other trigger bars, slides, if you have them. Hope this helps.
@@rplatt9829 switched to oem and let it wear it out a little bit and then removed the excess plastic with an exacto knife till the metal liner. For some reason the metal inside isn’t as high as the polymer coating
Yes they gobbled them up like they were at a buffet!! I have two pf9ss's and haven't had a malfunction yet so we'll see how its doing in a year or ten.
Do you see the angle and what the bullets are even hitting? No one has to mention a possible “skip” the dumbass people you refer to are always mag dumping on the side of a pond.
@@soicymoe8626 you sign a federal document saying you wont shoot into water its one of the main points. you take a test understanding this. good to see you never took a FSC test and are mad federal w your 1000$ p80s lol goofy
They love to hate man, you could have a brand new 43 but they think it’s stupid it’s not the 43x, you can buy a brand new dodge hellcat but they say it’s not the red eye. Funny world we live in brother
This looks exactly like when you're down in mw2. How the gun sways😂
Ik exactly what you mean most people probably don’t lol
2010 modern warfare 2 is when I learned to use a heartbeat sensor
@@davidlopez1169 i miss that attachment i know it’s a tactical now but you should be able to have a gun sensor too
The way he shot looked like the end of saving private Ryan when tom hanks was shooting the tank lol
Nice build looks clean asf
Oem slides just make it look better
In love wit this one straight up
I recommend the magguts +2 mag extension.
That's a beautiful gun
Beautiful. I did a polymer 80 AR, my nest is a pistol. Id like to make a 19
I like those triggers 🤠
man caught the fish lackin
What brand of frame insert part did you use? OEM glock? Did you have issues with rear rail holes?
What lower parts kit did you use?
That is sweet.
Where u get slide
Serpico *in my P80 Ralph voice 😂😂
Lmao! I know I was stuttering like a momo but that happens often so I just left it hahaha!
Sweet
Some frogs running for cover rn
Can you put a description where to get the parts I was able to find jig kit but I can't find the barrel slide
I’m trying to build the pf9ss quick question did you use the 43 oem lower parts kit or the 43x oem lower parts kit I see ur running the 43x slide so was wondering which lower part kit did u run??
43 oem works great 👍
Just buy a glock….
@@Starkesea what’s the fun if you didn’t build it
@@Starkesea naw these are better in my opinion if you build them right
@@TheBCN. you can use 43 oem internals and get 43x p80 slide and frame ?
How did you get a gen 5 slide to fit flushed ? My gen 4 g43 slide won’t fit on my p80 lower pf9ss
I didn't do anything special to it so it would fit. Your 43 slide should work fine on a pf9ss frame. Sorry you're having trouble and I can't be more help.
Hey, getting a failure to reset the trigger. Using dummy rounds I’ll put the mag in, rack it. And nothing. It might do that the whole mag. If I baby it forward there’s no issue. Trigger is fine. Any idea?
It sounds like the trigger bar isn’t engaging the sear correctly or at all. You need to visually verify that. Look through the back of the slide at about .75”-.5” before the slides in battery (they make short clear back plates just for this), use a light and see what’s happening. You can bend the sear (cruciform) but not a whole lot… make sure all the pin holes are where they should be. Try other trigger bars, slides, if you have them. Hope this helps.
Your connector is not bent out far enough. Google connector bend angle
did you have to do any extra cutting for the 43x slide
No I didn't have any extra cutting to do. Thanks for the question.
Lemme get the OD green one
Which Magazine did you go with?
Factory Glock mags.
where did you get your fram? Thats a nice build!
Frame
Polymer 69. Great company
Nice
I’m going to do longer videos of a bunch of guns. Thanks for watching.
Wow.
Very nice 🙂
what kind of trigger is that?
Serpico. $45~
Any modifications to make the 43x slide fit or does it just fit right on
Just fits right on as well as the 48 slide
Where is that trigger from
It’s a Serpico
does yours like to eat mag at first too
@@rplatt9829 switched to oem and let it wear it out a little bit and then removed the excess plastic with an exacto knife till the metal liner. For some reason the metal inside isn’t as high as the polymer coating
Yes they gobbled them up like they were at a buffet!! I have two pf9ss's and haven't had a malfunction yet so we'll see how its doing in a year or ten.
It look like a tuaras gx4
If you close your eyes maybe...just messing with you hahaha. I see what you mean. Thanks for watching and commenting.
Can u drop a link for the slide ?
Big Tex Outdoors has a back order option otherwise there are probably some on EBay. Thanks for watching.
I'm thinking of buying a serpico. Worth the investment?
Nah.....go Polymer 80 Glock OEM parts like NYRM 1974 P80 GLOCK 23 on CZcams
I’ve been using it for a year done me great but I have a ghost 3.5lb trigger bar as long as you make sure your drop safe and all your good
It’s worth it to me. 2,236rds through that 43x with the serpico trigger and zero issues besides a nice flat great feeling on your finger trigger! Ha!
Thx for the input sonny. I already invested so much in my project a oem trigger feels out of place.
@@sonnygunz9207 exactly brother. I got a silver serpico trigger in my g48 on my channel 💯
Did you have to put an aftermarket backplate on?
No. It’s a factory backplate. Thanks for watching.
crazy. you, shoot into water and no one says anything about a possible skip
let a brother do that and everyones a gun instructor. craaaaazy
Do you see the angle and what the bullets are even hitting? No one has to mention a possible “skip” the dumbass people you refer to are always mag dumping on the side of a pond.
@@soicymoe8626 you sign a federal document saying you wont shoot into water its one of the main points. you take a test understanding this. good to see you never took a FSC test and are mad federal w your 1000$ p80s lol goofy
They love to hate man, you could have a brand new 43 but they think it’s stupid it’s not the 43x, you can buy a brand new dodge hellcat but they say it’s not the red eye. Funny world we live in brother