Без комментариев, Мастер. Мне приходилось работать на экскаваторах. Одно что я приметил в твоих ковшах на технике, это то что ты не усиливаешь режущую ковша. Быстро износится и для самой техники большая нагрузка. А если бы на режущей стояли зубья, было бы легче врезаться в грунт. Так как у тебя ковш маленький, зубья можно взять с "гашетки" сенокосилки. А также на жатках комбайнов стоят, на нижней траверсе. Ты же умный человек, придумаешь. Здоровья тебе и твоей семье. Счастья , успехов, удачи.
Magnifico! Obrigado por gravar o passo-a-passo da fabricação!👍 Ser criativo e extra-classe em mecânica é fazer as coisas com o que se tem ao alcance das mãos. Os russos tem tradição nisso!👏👏👏 Thanks!🤙
Thank you, sir for sharing your time and talent. Future generations will admire your machine and videos. The great thing about knowledge like you have is that you can give it away AND keep it. Everyone benefits! Great work
Mate my hats off to you, you are one clever man. After having a watch of this video and scrolling through your channel I would have loved to have had you as my friend, son or grandson with all of the builds you have made. Your an awesome builder and no doubt an awesome bloke, just amazing
My thoughts exactly. Repurposing material,the use of strengthening gussets without overkill. Decent looking welds and some very inovative engineering. Very well done. Is there room for improvements. There always is but you can't make them sitting on the couch. A toast to you.
This is amazing work! You must have been working on vehicles your whole life to be able to do custom builds like this seemingly on the fly with all salvaged parts.. Thank you for sharing!
Thank you!!! The ability we have to create, build, then use our work or enjoy art, is one of the bonds we share as people!!! Thank you from SW Florida.
I think this and your other projects are awesome. May I suggest flow restriction valves on the bucket crowd to slow it down and get better feed back and more resolution. That clutch idea is brilliant and has given me some clues as to how I will approach one of my projects
Absolutely Awesome!!! This is what CZcams should be for! Very impressive and inspiring. Just goes to show that you can make just about anything you want yourself if you're willing to take the time and learn.
yes the time. for most people it goes like this. you work to make ends meet and then you have not enough time to do anything like this as you can not even get the parts together to make it. then you are too old and can not do it anymore. so you go on youtube to find someone, only one, who had the time when they were of working age and who actually build one. That is one in a million. What has this world come to. Everyone should build one of these while they can or find a young one to teach.
It's a really good job. One interesting thing about building from scratch like this is that the precision is found more in the process, than in the accuracy of any single part. These parts are made specifically for this one machine. They don't have to fit in any other place in the universe. Notice how he made them in a progression and made them fit (with some clever forward thinking) rather than building a bunch of things and putting them all together at the end. With modern machines we're used to thinking in terms of modular, replaceable parts. Fab'ing machines like this doesn't require the precision that would be needed if we had to go buy a replacement part. I'm not saying there is no precision in his machine - it's absolutely well build and accurate, but that's not the same as truly identical parts. Very precise machine tools (lathes and mills, etc) can built the same way. You just can't take a part from another machine and bolt it in as a replacement.
Well,I'm not sure how much $$'s you've invested into, I would consider that not the most expensive machine; but, I'd be mighty proud to own one just like yours!!! With the prices around the USA owner's think they have gold mines;but, In reality they only have a playground sandbox to use it in! I give you major props for your build!!!👍🏼👍🏼👍🏼
Apart from the hydraulics and the engine, it seems he'd got the rest made up from lying around scrap metal. I still like it and it shows no point in throwing away scrap metal in a hurry.
два моста от лады по 30$ двигатель за 164$ и еще коробка перемены передач от лады за 40$ ,а остальное металолом за 2$ за килограмм и это не считая гидравлики цену которой установить не удастся пока владелец не скажет сколько она стояла.
Love how you made it a pivot steering tractor. I hope you feel proud of your abilities. You are an amazing man with intelligence and talent out of this world.
I like how your front-end articulate loader has multiple angles of articulation versus others only have left and right and by video your doesn't have counter weights which doesn't appear that you need it even though you mounted engine more to one side it appears it doesn't effect it. You should be really proud of this machine .
59:30 Minutes of Shear Unadulterated Pleasure!! as an Engineer with over 40 Years experience under my belt from Machine shop to Design and Teaching at University level, it never Ceases to Amaze me, the Ingenuity of a Simple man with a few tools and a Need, This is what Engineering is all about, I have to admit I was totally Enthralled and the Finished Machine was Superb, Bravo! 59:30 Минуты Чистого Наслаждения!! как инженер с более чем 40-летним опытом работы от механического цеха до проектирования и преподавания в университете, меня никогда не перестает удивлять изобретательность простого человека с несколькими инструментами и потребностью, вот что такое инженерия. , я должен признать, что был полностью очарован, и готовая машина была превосходной, Браво!
I’m so impressed with what you built I think that’s so awesome! You my friend are a hell of a fabricator and engineer there’s no other words to say except WOW 😮!!!
Great Video! One thing you could do that would make using the bucket easier for digging would be to add about 5 teeth across the bottom front edge of the bucket. This will allow it to break up the ground before being scooped up.
The teeth would do that but they can be a bit of a double edged sword, a plain bucket will tend to ride over things, like pipes and cables, whereas teeth will dig and you discover them as you lift and they break!, also a toothless one can be used on hard or prepared surfaces with less marking. There is no right answer, you pay your money and take your chance as they say, time to make a second bucket I think, and possibly a set of pallet forks. A very smart build and the ball joint and bar has solved a problem with a possible project I am looking at, so good oh!.
You still need differential action on at least one axle in order to allow steering. But still, this is an amazing project with few machines, basic tools and amazing ingenuity!
I chopped some axles like that to extend them for a 4x4. The half shafts didn't like being welded and snapped pretty quick. I hope yours don't, but I suggest you measure these before they do. If you want more traction, first consider tractor tyres, then welding up the differentials. Don't weld the crown gear!
Ильдар ну ты красавчик.отличная техника из подручных средств и агрегатов.не считая двигатель.считаю тебе нужно такую технику под заказ изготавливать,да и ещё много чего по хозяйству всяких помощников
Very nicely done sir. I really liked how you used the two tie rod ends as the pivot point for the steering. It was very good thinking. Just a couple of things that you might want to look into, they are, 1st. Lock up one of the differentials by welding up the spider gears this will make that one differential locked so both Wheels will turn together. This will greatly improve traction. 2nd. Add traction tire to the machine.. 3rd. Add a cutting edge to the bucket, it will save the bucket in the long term Your work was excellent. I liked your solution regarding the clutch as well as using old Lada parts and scrap steel to keep the price down. I look forward to your next video. Please, No music, talk to the camera like a friend was helping you but must explain why you do each thing. Automatic translation makes it so we can understand you........mostly. Please understand, I am not saying you did anything wrong, my suggestions were to make your machine a little better, just a little better. Thanks, Bob Ordewald, Staunton Virginia USA
@@ildar174- nice, I live in Staunton Virginia, USA. If you look at a map I live midway between Florida and Maine. it does not get cold like the conditions that you were working in. I grew up about 500 miles North of here so I understand cold! The flight is 160,000 rubles! Thanks for letting us watch! Bob
He doesn't need your advice. An Umurican could NEVER do what this guy does and quite frankly, I have no problem following him without reading subtitles. He is very good at showing his work! In fact, subtitles are just more annoying than helpful!
Так всё легко на видео, но в живую это большой труд! Хотелось бы Ильдар увидить межосевую блокировку с преднатягом, как бы вы воплотили это в жизнь?! Для трактора это было бы круто
I really enjoy your vides and watching how you made the articulation between front and back was awesome I love to do this stuff and you make it look so easy , Good job I will be back for more !!
Работа проделана огромная, знаю. Эти конструкции занимают уйму времени и сил и только в ютубе всё выглядит быстро и якобы просто. Нужно иметь много терпения, чтобы делать такие работы. Ильдар, скажите пожалуйста, какой марки/модели гидронасос и гидроцилиндры Вы использовали или дайте ссылочку посмотреть их характеристики.
Рф торговая компания не когда не поддержит наших Прекрасных и самых лучших Славянских МужЧин и ЖенЧин ! Теперь вы понимаете почему нас Славян боится вся планета только Славяне могут творить добро и свет ! Из за этого на и истребляют ! Мужик ты Супер твой Род гордится тобой уважение тебе во все клеточки !!!!!
This is why I Love CZcams. Amazing work man. You are a master mechanic and genius engineer! Loved the part where you just chopped the bell housing off that transmission.
You did great. Couple of recommendations, Install off-road/mud type tires and weld a harden steel cutting edge on to your bucket. And when you are digging use the articulation, slowly moving forward like you are doing and wiggle the machine back and forth using the steering. But amazing work!
That's an awesome build. There's nothing like the final coat of paint to bring it all together. Looks like something a small company would be making and selling. Now just need the mini excavator to go with it. I've always said if I was rich, forget the fancy sports cars and all that rich toy noise. I'd have the most awesome sandbox (an acre) with real excavators, bulldozers and such. Invite my buddies over to play.
Без комментариев, Мастер. Мне приходилось работать на экскаваторах. Одно что я приметил в твоих ковшах на технике, это то что ты не усиливаешь режущую ковша. Быстро износится и для самой техники большая нагрузка. А если бы на режущей стояли зубья, было бы легче врезаться в грунт. Так как у тебя ковш маленький, зубья можно взять с "гашетки" сенокосилки. А также на жатках комбайнов стоят, на нижней траверсе. Ты же умный человек, придумаешь. Здоровья тебе и твоей семье. Счастья , успехов, удачи.
Большое спасибо, что поделились! Отличное видео! Конечный результат фантастический! Желаю всем сил, здоровья, мира, хорошего дня! Удачи!
👍🍀🇭🇺🌞☝️
Человек с золотыми руками.
Молодец. Желаю вам творческих успехов
Вот ты молодец Ильдар, мне так понравился твой фронтальный погрузчик. Просто класс.
Дай Бог Вам крепкого здоровья!
Будете счастливы!
Very nice build. I was impressed without the front-end loader. After that, I was double impressed. I also like your self-made drill press for metal.
Magnifico!
Obrigado por gravar o passo-a-passo da fabricação!👍
Ser criativo e extra-classe em mecânica é fazer as coisas com o que se tem ao alcance das mãos.
Os russos tem tradição nisso!👏👏👏
Thanks!🤙
isso ai... cara pálida... é nois na fita... nois é foda...
Щллллл
@@user-gv1lh1gq2p Признайся, ты просто завидуешь (Эътироф кунед, шумо танҳо ҳасад мебаред)
Thank you, sir for sharing your time and talent. Future generations will admire your machine and videos. The great thing about knowledge like you have is that you can give it away AND keep it. Everyone benefits! Great work
Mate my hats off to you, you are one clever man. After having a watch of this video and scrolling through your channel I would have loved to have had you as my friend, son or grandson with all of the builds you have made. Your an awesome builder and no doubt an awesome bloke, just amazing
این پسرت پنجاه سالشه، شما جوون دیدی 😁
My thoughts exactly. Repurposing material,the use of strengthening gussets without overkill. Decent looking welds and some very inovative engineering. Very well done. Is there room for improvements. There always is but you can't make them sitting on the couch. A toast to you.
@@user-yo5fo5by7q . . B N b m . V ?N n b
@@user-yo5fo5by7q . . B N b m . V ?N n b
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
This is amazing work! You must have been working on vehicles your whole life to be able to do custom builds like this seemingly on the fly with all salvaged parts.. Thank you for sharing!
Всегда гордость за таких людей, слов нет так держать.
Thank you!!! The ability we have to create, build, then use our work or enjoy art, is one of the bonds we share as people!!! Thank you from SW Florida.
I think this and your other projects are awesome.
May I suggest flow restriction valves on the bucket crowd to slow it down and get better feed back and more resolution.
That clutch idea is brilliant and has given me some clues as to how I will approach one of my projects
yes
Absolutely Awesome!!! This is what CZcams should be for! Very impressive and inspiring. Just goes to show that you can make just about anything you want yourself if you're willing to take the time and learn.
yes the time. for most people it goes like this. you work to make ends meet and then you have not enough time to do anything like this as you can not even get the parts together to make it. then you are too old and can not do it anymore. so you go on youtube to find someone, only one, who had the time when they were of working age and who actually build one. That is one in a million. What has this world come to. Everyone should build one of these while they can or find a young one to teach.
Very impressive, thank you for sharing. It is a true gift to watch a master craftsmen work. You make it look easy.
That's the damnedest bit of brilliance I've ever seen when it comes to a clutch setup!! I'll have to store that one in memory for future use!
Красавчик как всегда! Думал куда пропал? А у него совершенно новый уровень!!!
May be one of the best builds I've seen on youtube! Great job!
After seeing this, there is no limit to what you can build, well done to you sir
So impressed with you build, great job especially the many things you repurposed to fit your need. Well done!
Ya, the way he narrowed those axels was cool
I have never seen someone making something so accomplished by working with so little precision ! Good job !
McGiver would be Proud !!!!!
It's a really good job. One interesting thing about building from scratch like this is that the precision is found more in the process, than in the accuracy of any single part. These parts are made specifically for this one machine. They don't have to fit in any other place in the universe. Notice how he made them in a progression and made them fit (with some clever forward thinking) rather than building a bunch of things and putting them all together at the end.
With modern machines we're used to thinking in terms of modular, replaceable parts. Fab'ing machines like this doesn't require the precision that would be needed if we had to go buy a replacement part. I'm not saying there is no precision in his machine - it's absolutely well build and accurate, but that's not the same as truly identical parts. Very precise machine tools (lathes and mills, etc) can built the same way. You just can't take a part from another machine and bolt it in as a replacement.
Congratulations on a LOT of effort Sir. Very good project, I enjoyed watching the process. Thank you for sharing your experience, take care.
Excellent. The innovative way you used what parts you had was amazing. The old adage “use what you have and make it work “. Love it!!
A criatividade do ser humano é algo realmente incomparável. Parabéns!
That thing is super cool! I could really use something like that around my place. You’re quite the fabricator, awesome build!
Well,I'm not sure how much $$'s you've invested into, I would consider that not the most expensive machine; but, I'd be mighty proud to own one just like yours!!! With the prices around the USA owner's think they have gold mines;but, In reality they only have a playground sandbox to use it in! I give you major props for your build!!!👍🏼👍🏼👍🏼
dv bh irbe8 Vivi di UB hp on jauh mo p kok om om om PPL PPL PPL km om PPL PPL PPL ini p PPL kakak-kakaknya mix bo
Apart from the hydraulics and the engine, it seems he'd got the rest made up from lying around scrap metal. I still like it and it shows no point in throwing away scrap metal in a hurry.
два моста от лады по 30$ двигатель за 164$ и еще коробка перемены передач от лады за 40$ ,а остальное металолом за 2$ за килограмм и это не считая гидравлики цену которой установить не удастся пока владелец не скажет сколько она стояла.
2000-3000 dollars
ابداع من شخص يمتلك قوت العزيمه وثقه بنفس ان يصنع من نفسه شخص ناجح قبل ان يصنع هاذه الآلات الذي نجح بصنعها ،👍👍👍
Excellent work with what you had available. I'm amazed at the work you get done outside in the snow and cold. That would stop most people.
Отличный аппарат получился. Дальше будет еще лучше и продуманне . Уверен. Все с опытом.
O cara é um gênio. Parabéns 👏
Love how you made it a pivot steering tractor. I hope you feel proud of your abilities. You are an amazing man with intelligence and talent out of this world.
When you have the right tools, and most important, the right skills and determination, this nice build show what you can achieve!
What great skills !!! A fantastic build with mostly used parts and outsides beside that, you`re a real mechanic man !!
I like how your front-end articulate loader has multiple angles of articulation versus others only have left and right and by video your doesn't have counter weights which doesn't appear that you need it even though you mounted engine more to one side it appears it doesn't effect it. You should be really proud of this machine .
You are the best I was so happy to watching you build that beautiful machine thanks again
Nice build! A true craftsman.
Молодец мужик! 👍 резину поставить другую, клыки добавить на ковш и прицепное сделать. И трактор будет полноценным. Класс. Уважение мастеру!
Мотор помощнее - и будет АМКОДОР 😊
Классный Аппарат не заменимый помощник в деревне ☝️🔥👌🤝🤙
Мне бы в деревню Ильдара в соседи.... Это было бы незаменимо ❤
This build was the best video of someone building a little master piece. You played out one of my fantasies thank you very much very rewarding
Так вот ты какая, лопата рядового Рабиновича! Браво, Мастер! Спасибо за удовольствие.
That was a cool build. Made with salvage parts. Something you created yourself is something to be proud of 👍👍
THE BEST piece of engineering I’ve ever seen ....brilliant workmanship at every level....well done mate 👍
Ну Ильдар, у тебя руки от туда от куда надо!! ))))) Для самоделки ИДЕАЛЬНА!! Молодец Джигит!!!
Super, jestem pod wrażeniem.
Złote ręce , szacunek i poważanie . Pozdrawiam z Polski
голова и золотые руки мастер
Bravo Great job Brilliant use of old junk and you made a very useful tractor!
Потрясающе!сочетание ума,рук и инженерной мысли!
59:30 Minutes of Shear Unadulterated Pleasure!! as an Engineer with over 40 Years experience under my belt from Machine shop to Design and Teaching at University level, it never Ceases to Amaze me, the Ingenuity of a Simple man with a few tools and a Need, This is what Engineering is all about, I have to admit I was totally Enthralled and the Finished Machine was Superb, Bravo!
59:30 Минуты Чистого Наслаждения!! как инженер с более чем 40-летним опытом работы от механического цеха до проектирования и преподавания в университете, меня никогда не перестает удивлять изобретательность простого человека с несколькими инструментами и потребностью, вот что такое инженерия. , я должен признать, что был полностью очарован, и готовая машина была превосходной, Браво!
Thanks!
I’m so impressed with what you built I think that’s so awesome! You my friend are a hell of a fabricator and engineer there’s no other words to say except WOW 😮!!!
É incrível como uma pessoa sozinha e com suas ferramentas é capaz de fazer... Que trabalho incrivel!
Один из лучших кулибинов в просторах Ютуба 👍
Ao
Qqqaqqqqqqaqqqqqqqq
Can't you talk
kreatif & bermanfaat👍
0-
Great Video! One thing you could do that would make using the bucket easier for digging would be to add about 5 teeth across the bottom front edge of the bucket. This will allow it to break up the ground before being scooped up.
The teeth would do that but they can be a bit of a double edged sword, a plain bucket will tend to ride over things, like pipes and cables, whereas teeth will dig and you discover them as you lift and they break!, also a toothless one can be used on hard or prepared surfaces with less marking. There is no right answer, you pay your money and take your chance as they say, time to make a second bucket I think, and possibly a set of pallet forks.
A very smart build and the ball joint and bar has solved a problem with a possible project I am looking at, so good oh!.
Золотые руки!!! Сколько труда и терпения! Терпение и труд всё перетрут!!!
Parabéns pelo seu trabalho 💯💯💯💯
Nice build. To eliminate wheel spin, either put locking differentials in or weld the spider gears to the side gears.
You still need differential action on at least one axle in order to allow steering. But still, this is an amazing project with few machines, basic tools and amazing ingenuity!
Differential is important for this machine
@@seimela Дифференциал важен ,но не кретичен,так как износ и нагрузка повысится в несколько раз и будет приводить к постоянным поломкам
I chopped some axles like that to extend them for a 4x4. The half shafts didn't like being welded and snapped pretty quick. I hope yours don't, but I suggest you measure these before they do. If you want more traction, first consider tractor tyres, then welding up the differentials. Don't weld the crown gear!
Ильдар ну ты красавчик.отличная техника из подручных средств и агрегатов.не считая двигатель.считаю тебе нужно такую технику под заказ изготавливать,да и ещё много чего по хозяйству всяких помощников
Погоди он скоро не только мосты укорачивать будет, а коленвалы на ЯМЗовских моторах и собирать мини моторы для своих самоделок🤣
@@user-mi2qk6ib5w ну а что,,, почему бы и нет😊), если у человека руки из плеч растут)))
@@user-mi2qk6ib5wНе важно от куда руки растут, ЕСЛИ ОНИ ЗОЛОТЫЕ!😉😄
ага конечно, откуда у него станки? где то в советское время спи..ил )))
@@lmaq8352 пиздят такие как ты, а мастера с золотыми руками покупают на металлоприемке и восстанавливают!
Very nicely done sir. I really liked how you used the two tie rod ends as the pivot point for the steering. It was very good thinking. Just a couple of things that you might want to look into, they are,
1st. Lock up one of the differentials by welding up the spider gears this will make that one differential locked so both Wheels will turn together. This will greatly improve traction.
2nd. Add traction tire to the machine..
3rd. Add a cutting edge to the bucket, it will save the bucket in the long term
Your work was excellent. I liked your solution regarding the clutch as well as using old
Lada parts and scrap steel to keep the price down.
I look forward to your next video.
Please, No music, talk to the camera like a friend was helping you but must explain why you do each thing.
Automatic translation makes it so we can understand you........mostly.
Please understand, I am not saying you did anything wrong, my suggestions were to make your
machine a little better, just a little better.
Thanks, Bob Ordewald, Staunton Virginia USA
Thanks for the advice!
@@ildar174- where do you live?
@@robertordewald8678 Russia. Chelyabinsk
@@ildar174- nice, I live in Staunton Virginia, USA. If you look at a map I live midway between Florida and Maine. it does not get cold like the conditions that you were working in. I grew up about 500 miles North of here so I understand cold! The flight is 160,000 rubles! Thanks for letting us watch! Bob
He doesn't need your advice. An Umurican could NEVER do what this guy does and quite frankly, I have no problem following him without reading subtitles. He is very good at showing his work! In fact, subtitles are just more annoying than helpful!
Так всё легко на видео, но в живую это большой труд! Хотелось бы Ильдар увидить межосевую блокировку с преднатягом, как бы вы воплотили это в жизнь?! Для трактора это было бы круто
с просмотров видео все окупилось!!!
Заварить иференциал вот и будет блокировка
Ковш конечно хлипковат..нижний лист нужно было потолще..
@@user-qb2cg2ie4c⁰000⁰❤⁰😊 nee pant 0
Отличный помощник, скоро на поток ставить и людям продавать.
Ага......люди борзые, за 50 тыс купить захотят
@@user-kx3ou5ry777m
Ну почему вы так о людях плохо думаете ?
Я и за 30 взял бы !
🤣👌🤘
50 только на раму хватит
I really enjoy your vides and watching how you made the articulation between front and back was awesome I love to do this stuff and you make it look so easy , Good job I will be back for more !!
Работа проделана огромная, знаю. Эти конструкции занимают уйму времени и сил и только в ютубе всё выглядит быстро и якобы просто. Нужно иметь много терпения, чтобы делать такие работы.
Ильдар, скажите пожалуйста, какой марки/модели гидронасос и гидроцилиндры Вы использовали или дайте ссылочку посмотреть их характеристики.
Вот бы государство поддерживало таких людей с золотыми руками🙂
они и поддерживает ) самозанятый а значит плати )
На хер их поддерживать государству?
С них выхлоп в бюджет нулевой.
Государству нужны глупые и зависимые, а не умные и свободные.
Государству нужны танки и ракеты
Рф торговая компания не когда не поддержит наших Прекрасных и самых лучших Славянских МужЧин и ЖенЧин ! Теперь вы понимаете почему нас Славян боится вся планета только Славяне могут творить добро и свет ! Из за этого на и истребляют ! Мужик ты Супер твой Род гордится тобой уважение тебе во все клеточки !!!!!
Ильдар, очень вас прошу, сделайте паровой трактор / локомобиль. С вашими навыками это проще некуда, а для нас, зрителей, фуррор.
А подводной лодки вам ненада?
Капец ты мужик, Леонардо да Винчи.. Суперская работа!
This is like an a magical workshop i have never seen before
You are the greatest engineer in the world
Отличная машина! Насколько облегчает сельский труд!это тебе не вилами кидать..,побольше бы таких!
Well done my friend. Looking forward to seeing you put off road tyres on when you find some. Brilliantly done!!!
Золоті руки, друже мєш, і світлу голову . Удачі і міцного здоров,я , творчих успіхів !!!
انت فنان أفكارك جد رائع وتصنع آلات غاية في الروعة ❤👍 استمر في الابتكار
أفكارك تلهمني وأعمالك اتعلم منها كثيراً 👏🙏
Awesome build my friend. I can't waite to see what your next project is.
This in my opinion, 'is a "WOW" build. Thanks Comrade for sharing your skills and this fine machine build.
Absolutely wonderful!! Thank you.
Excellent and cool build! Thanks for sharing!
You solved a problem for me, by showing me how to use a brake rotor for a flywheel friction surface. A wheel hub and boom! Belt-driven trans... Great!
Great observation! That’s my biggest takeaway. That’s was truly amazing.
С языка сняли. Давно смотрю Ильдара. Всегда восхищаюсь. Здоровья вам Ильдар!
Amazing!!! Now you need some offroad tyres.
This is why I Love CZcams. Amazing work man. You are a master mechanic and genius engineer! Loved the part where you just chopped the bell housing off that transmission.
спасибо за подробный фильм. поражаюсь вашим творчеством и производительностью. удачи!
Без лишних слов, КРАСАВА!!!
So Awesome 👌 and we want to build one, thanks for the measurements!
Супер идея, исполнение выше всяких похвал!!
Your work is so clean and organized. It's amazing!
Brilliant!!! That was a brilliant watch. Thanks for the great video. Les
Very few people would have the ability to do what you have done. It made a wonderful video to watch.Thanks
Great job. You have a lot of talent and skill to create this machine.
You did great. Couple of recommendations, Install off-road/mud type tires and weld a harden steel cutting edge on to your bucket. And when you are digging use the articulation, slowly moving forward like you are doing and wiggle the machine back and forth using the steering. But amazing work!
A good craftsman is a good craftsman. No matter what country your from.. Awesome job 👍👍
That's a very good bit of reuse & recycling there! Top job.
Нык каты булган бу, абзый👍👍👍👍👍
İmrendim doğrusu. Çok güzel bir iş yapmışsınız. Tebrikler!
انت رائع وتستحق التكريم ، تحية لك من مصر
You are one clever guy! If you lived near me I'd have you build me one of those👍🏻 Excellent job👌🏻
So you know: spaded bucket works much better, loads better. good job boss.
I'd love seeing something like this with tracks! This is awesome
Suprovej konstruktér.... To řešení spojky !!! Nádhera.... Jednoduché chytré a hlavně užitečné,,,,👏👏👏👏🦾🦾
That's an awesome build. There's nothing like the final coat of paint to bring it all together. Looks like something a small company would be making and selling. Now just need the mini excavator to go with it.
I've always said if I was rich, forget the fancy sports cars and all that rich toy noise. I'd have the most awesome sandbox (an acre) with real excavators, bulldozers and such. Invite my buddies over to play.
You said very well👍, I love those toys.😅
Outstanding!!!! Enjoyed watching your skill!!!
،you are amazing man.. excellent job