High pressure non-electric water pump - New design with three waste valves
Vložit
- čas přidán 23. 11. 2023
- High Pressure Non-electric water pump, New design with three waste valves
In this video I design a high pressure non-electric water pump which is usually called a hydraulic ram pump. With the latest design
The material I use is made from PVC pipe which is designed with three valves so that this pump produces maximum pressure than before
Hopefully what I have done will benefit many people, especially in hilly areas where water is scarce, because this type of pump can last hundreds of years if the material used is made of iron.
Thank you for your input and suggestions
Hope it is useful
Music:
Drums of the Deep by Kevin MacLeod is licensed under the Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/ - Jak na to + styl
Warning!
A hydraulic ram pump is a water pump that has high pressure and can explode at any time.
Be careful when the pump is working, do not let your body rest on the tube
Thank you for your participation
Hope it is useful
______________________________________________
Peringatan!
Pompa Hidram merupakan pompa air yang bertekanan tinggi dan sewaktu-waktu dapat meledak,
Berhati-hatilah saat pompa bekerja, jangan biarkan tubuh Anda bertumpu pada Tabung
Terima kasih atas partisipasinya
semoga bermanfaat
You my dear friend are a very intelligent human being.
I'm an engineer and fully understand your process,methods and fluid dynamics obviously as you do too.
Your video presentation is outstanding and the way in which you apply multiples in process is admirable because it is correct 👍
*As a note to you*
If you are not already educating the younger generations,please do so ,and the "above header precautionary notice you've stipulated is very important also- yes it can explode and be dangerous 👍
Thankyou for your wonderful efforts in presenting this on this platform and other platforms aswell if you've not done already!
This is exactly why CZcams was created.
It's YOU and who what you are without contrived nonsense!
You have a very good knowledge of fluid dynamics and mechanical principles that are your asset that is quite valuable to future generations and in saying so myself , please continue to inspire the future generations for they need you and people like you and I to show them in practice what is doable even when there is little at hand to achieve great feats.
Thankyou for posting a time piece of your talent ❤️👍
Subscribed 👍💪
sxq CTRL1qq
😊
Ariete, más antigüo que yo.
Your very smart and your video was really good. One thing you should've done before you started putting the pipe pieces into the fittings was to put a chamfer around the outside of the pipe so the pipes sharp edge won't scrape the glue as it's being pushed in. And as you were gluing all the pieces together you should've glued both the male pipe and the female socket ends that were going to be joined together and twist them about a quarter turn as you push them together. By not doing those two things it caused your pump to leak . And it's always good to debur the inside edge of your pipe too so nothing that might be in the water that gets through the screened fitting can get caught on the pipes edges and build up over time and get clogged up. I think if you would've done all that your pump would've held the preasure and not leaded . Another thing, if your going to build something that will have any kind of preasure build-up always make sure to let all glued joints go the full cure time. Some glue times can vary from 4 hours to 24 hours before putting pressure on your system and the companies that make the adhesive really advise you to not ignore the cure time before pressure is put on the system , I know you've put alot of time and money into your project . I really liked the way you made your own internal valve with the big pvc pipe you reformed flat and cut out and sanded your pieces round . You show alot of skill . Loved your video ! 🙂
Thank you for your advice sis
Purple primer
Geez what a sceptic!
Ww
@@chippydog2 What's your problem ? I gave him praise for his project and even went back and added to it. All I did is give some helpful advice so maybe his pvc pipes won't leak anymore. I don't know this but all those big pvc pipe and fittings aren't cheep ! And it sucks if something goes wrong with your project after you worked really hard on it ! Your probably one of those guy's that can't stand for someone to give you help or constructive criticism ! You probably look at that as a slap in the face instead of someone trying to help teach you a better way / easier way to do something ! But if you didn't come up with the idea yourself you considered it an insult and get mad ! Sound about right ? Why don't you go back and read what I wrote and think again what you wrote to me .
An old West Virginia friend who had been into coal mining told me about the ram hydraulic pump years ago though I found nothing about it here on the internet in the United States. It's amazing to see it. Once it started Ram Jack came to mind.
A company called Walton makes them in France. They ain't cheap though!
got one running here for 2 years now in Pennsylvania. Found the video on YT
@@nchestercountynews4955, Hi, what is YT? I would like to buy a Ram hydraulic pump.
@@SteveRoman-ls2fp CZcams
Thank you
As a resident of the US, we have been spoiled and expect individuals to design what we need instead of thinking outside the box, as this person is doing. Thank you for posting this and God bless you!
đây là Việt Nam
@@bonbon-sr3lqindonesia
As an American who Sees other Americans building self made equipment all the time, sounds like you might be from LA or some other dystopian Giant city in the US.
Indonesian. West Java.
vc podia contratar um pra falar por vc já que vc não fala nada
By now this guy has probably thought a hundred ways he could have made it better, and improved it. .. he has more imagination and ability than most engineers I meet just graduating from university. Give him two years at ANYYYYY job and he will be a specialist at it. Intelligence is intelligence, and can be used at ANYTHING.
Not true, my boss was a Prof. Dr. Dr., but not able to open the dish washer.
@@ws4860
What!!
That is what I said, can you read??
I said THIS GUY not professors or PhD's.
This young man is what I call a PVC mechanic. VERY well done. Only correction I can say is to use cleaner on the pipe for better glue penetration… can budget the money by applying the glue to the female side of the fittings half way into each. Will save glue and make a neater and stronger connection. 👍GREAT job. Absolutely love your ability to make your own relief valves ! Adjustable at that . Amazing work ! Un-Paralleled work ethic’s 👍
I have added screw fittings to mine as they need to be clean from time to time,
Bí
pvchanic
Moi , j'adore ton humour
.
Satu perkongsian yg baik dan bermanfaat 👍1like
menginspirasi banget, keren salut buat ide kreatifnya pvc....👍👍👍👍
That PVC glue is amazing, must be a kind of glue which NASA approved for plumbing on apollo spacecraft
🤣🤣😂
Thank You. Enjoyed your skills and techniques. These pumps have been around for a long time but i always enjoy the way they are brought to life. In Jamaica they call these ram pumps Heart Beat Pumps because of the sound they Make. And are found in older Farms and plantations were there was no electric Power available.
Keren...., solotip utk daerah sumber air yang melimpah.... Trims min berbaginya, Pekalongan nyimak
Whenever using PVC pipe and couplings always glue both pieces even though it says cement, it is a welding chemical, that literally melts both pieces together , traditionally, not a glue.
And as we both know wet concrete does not stick to dry concrete.
Clamp+drill+rusty nail=lathe, good job! You may want to lock down those piston nuts once you've got them properly adjusted.
Very interesting design, I see that the 3 valves could not only help in long-term operation but also with the pressure, however, I think it'd be smarter to make the 3 valves have their gates(or whatever you'd call the part that actually helps with the switching) physically connected to each other for synchronization (even tho it's able to sync by itself), or just use one single huge valve.
Also, I'm pretty sure the vibration will eventually make the nuts move out of place which will require manual tuning again, a simple fix for that would just be adding another nut or using something like Locktite ig.
Kamu luarbiasa It's great that it no longer consumes electricity, it can be used as long as possible, nothing will burn because the engine is hot all the time
The Hydraulic Aries! 👍👍👍 An eternally old invention. About the end of 1800 years. Conveying efficiency about 70%, 30% water 💦 run away, can do without electricity!!! Seals must be changed every six months. As I said, without electricity!!! 👍👍👍
Dr
Well done! Thank you. When I solvent-weld PVC or ABC pipe, I twist the pipe as I insert it to more evenly distribute the glue.
원리상 진짜 될수 있겠네요. 운동 에너지를 모아서 압력을 올리고 ㅎㅎㅎ 좋은 정보 감사합니다
That is why you twist the pipes while assembling them, it seals the joints by better mixing the two fittings.
When you glue the pipes, first prime them both sides, then glue both sides. Push in while twisting into place. Nice job!
High pressure fittings, low pressure pipe, no primer. What could possibly go wrong? Lol.
Sungguh anak muda yabg kreatif 👍👍 kamu layak dapat penghargaan
Das doch ein Zeichen dafür was wir Alles ohne Strom,Kohle usw. Machen könnten! 👍👍👍👍👍
The only genuine free energy machine, very well built.
Karya Inovasi yang luar biasa pompa air non elektrik menjadi solusi dapat dipergunakan didaerah pedesaan yang belum masuk jaringan Listrik PLN
Превосходный урок мастерства и изобретательности! А главное - на такой красивой природе нет лишнего шума и дыма от бензинового насоса.
Да уж! Вот только водозабор у него из каких-то грязных водоёмов, а выход - кристально чистой воды.
@@user-bq7qq3mf7p ну он же фильтр грубой очистки поставил ))
Это действительно рабочая схема но там для ее работы много условностей нужно соблюсти
Вот интересно возможно ли построить каскадную сеть гидротаранов, что б сбрасываемая вода верхним насосом скапливалась в нижнем бьефе, а далее аналогичный гидротаран и такими каскадами поднимать воду???
Однако,физику не обманешь!😂
WOW!!! I had NO IDEA this could be done!!! GREAT JOB!
It can't, he's full of shit.
actuall hydrolic rams have beed around and in use for centuries since the 1200's
This unique implementation of the hydro-ram pump design appears to be performing rather well with a useful volume of water. Using simple materials and tools shows ingenuity and resourcefulness. Well done!.
Хорошо, когда у тебя лето круглый год.
Making creative idea is unlimited..!
Make your own..you to believe..everthing sorround you has a purpose and value..I believe on His talent.
Ini bener2 ahlinya ahli mekanik air. Hebat!!!
tanpa ada kata,,,yang penting bukti nyata,,,kamu hebat lurrr,,,,
that is really cool how the waste valves all react together so well.
I hadn't seen (or considered) a multiple [valve] ram before. It seems like a really good idea
Your water flow is much higher than other examples I've seen
@@ByronWatts 99% it´s fake... You need much stronger stream for way less water...
@@jduzivotem3985 Now that i think about it, sure one can put electric pump on the intake or just swapping it to output when he climbs up, pressurizing the system and turn it off an on again to create the pressure change, but faking it takes more effort in automation than building this and ram pumps do create considerably less flow compared to main stream but if you look the water reserve pipe, there is hefty amount coming to keep it empty. Fill the dam full and it probably could work least until dam is empty.
I would love to build one to test this but lack any flowing water most of the year, so there is no point in that regard.
@@jduzivotem3985 fake?? Hahaha.. learn more please
@@SankichupWell.. water pressure is divided over the pumps.. so each pump creates less pressure.. only reason I see for doing this is if you really want that effect. Say the valves can be less robust. Its plastic afterall.
It's really interesting when I get to watch good videos like this. I really like this simple, peaceful life. I wish you good health and peace.
c'est relaxant.
Place a relief valve in the middle of the blue hose, and you will see that the pump will have strength, thus pumping even better. Congratulations on the good work. Brazil
"Relief valve " or you mean a check valve (one-way valve) ??
@@carlosmejia5728 Yes, that's right, with the valve retention it relieves the pressure on the pump, leaving it freer and stronger to hold the weight of the water that is rising and returning, so this valve relieves system fatigue.
Válvula antiretorno tambien se llama en Latinoamérica.
Menteur
He is highest talented water work engineer..👍👍👍
Thank You
he is only copycat from another channels 😊
Inovasi yang cerdas....kereen abis. Kalau yang lain katupnya vertikal, yang ini horizontal.
Nao sou de ficar o video todo assistindo mas esse video vi por compelto voce esta de parabens adorei o video
Ingenious use of an electric drill + vice as a lathe; 10 out of 10!
Great job man, the only mistake you made was not to glue the tube and the fitting. You need always glue both of them before pushing them together. Nice video
and let the dry for 8 to 24 hours depending on the temp
Kudos to this gentleman for his hard work and self achievement. Hard working Taiwanese brother.
Thank you
Salut atas idenya.Mohon berikan tutorialnya,juga bahan yg diperlukan serta ukuran bahannya.TERIMAKASIH.TUHAN BERKATI.Amien
Apakah ini beneran bisa ???
Beneran mas, yang palsu-palsu di channel saya GK ada
He's Indonesian, I think you will find.
Pompa air non listrik sangat kreatif ide yang sangat cerdas dan bisa di contoh atau bisa di pergunakan disaat kita memerlukan sanga efektif dan episien
Clever use of the laws of nature. :)
If you can build one in steel or have parts for a repair. The plastic parts may wear out in a couple of months.
Luar biasa...ide sangat sangat berGUNA👍👍👍👍👍👍👍👍👍
Mantap Bang..Pompa tanpa listrik nya..Super Duper Keren👍👍👍👍👍👍
Nada mais é do que um "CARNEIRO HIDRÁULICO". Ele simplesmente reinventou a roda!!!
Espetacular. Show de bola. Parabéns.
Maravilha belíssimo trabalho boa ideia gostei muito legal vou montar uma pra o meu sistema, valeu você e polivalente de verdade felicidades boa ideia 💡...
Terbaik. Sangat sangat menakjubkan pandai sekali dia 👍👍👍👍
Mantab ide kreaktif sngt berguna cocok untuk daerah yg blm terjangkau PLN ❤
In Brazil this is called "Ram Pump" and is widely used on farms. (No Brasil isto é chamada de "Carneiro Hidráulico" e é muito utilizada em fazendas)
Xasds❤
Excellent work!👍👍 Have been an agricultural engineer for many decades now. Have always wanted to build one of these just for fun. But I live in Canada and water pipes have to be buried 8’ in the ground to prevent freezing up. Not to mention the rivers freezing up. I would use different construction techniques but your ingenuity deserves much praise. 🍻Cheers!
im sure there'd be a way to design it such that the entry point freezes over before anything downstream of it... allowing the downstream pipework to discharge before any water freezes inside? might let you bury the pipework only a little below ground?
just a thought...
and they are called waste valves not strength valves i think 3 is a waste of material and build time plus three can cause issues of getting prper adjustment . a single waste valve will function the same and be eaiser to adjust and could increase your flow volume and pressure both. just remember the higher the pressure the lower the flow rate and lower pressusre will produce higher flow rate, trick is to find the optimum of bother for yout application and because it works on the water hammer affect there are a few factors to keep in balanceand the sudden elbow at bottom is actuall hurting effiecency of the ram a small amount drop of pipe from source shop be one single straight shot with no elbow heat and gently curve the feed pipe so no elbow try a few minor changes to the waste valve see if it helps 👍 well done and an ingeneous build for use. and i build the ram on my land over 50 years ago and it is still going strong and never skipped a beat in all those years
Magnífico trabajo. Felicitaciones!
Great job. Great presentation thank you
Muito bom, boa ideia.
Sounds like a great solvent / primer mix. 😊
Aqui no Rio Grande do Sul se chama essa bomba de carneiro hidráulico. Tem pronto pra vender nas casas de agropecuária. Mas sempre com uma válvula de saída. Essa com três válvulas é a primeira vez que vejo. Muito bom! Parabéns pela ideia.
Abraço pra gauchada daqui de Santa Catarina... Sul sempre...
é só colocar 3 juntas
I learnt something really cool today. Many thanks.
not sure splitting the flow in three is a good idea. One big valve might better to preserve the pressure?
Yang saya tunggu dari awal sampek akhir malah cerita ngaconya mang jon😂
Kereeen bang, kirain channel luar ternyata channel Indonesia. Saluttt
Salut, semoga makin berkembang tekniknya dan jd solusi bagi kebutuhan masyarakat. Alam harus dimanfaat dgn benar, termasuk cahaya matahari yg melimpah (menjadi solar stove, tenaga listrik, dll).
😊
Very good. Simple yet complex 👍
The valve assembly with the slotted pipe in a pipe is excellent.
I've never had a pvc glue with that long of an open time. The glue here hardens in 6 or 8 months so I just buy this blue lava stuff that is always on clearance. It is about as fast as they get. Not sure any of it is open that long. I've used near all of the different kinds and the most longest not more than 30 seconds. Might need polyurethane glue to have enough time to assemble it.
keo của Việt Nam đó bro
Je ne connaissais pas le principe de cette pompe à eau. Elle offre une solution intéressante quand il n'y a pas d'électricité disponible. En plus cela tombe moins en panne. Bravo pour cette vidéo.
C’est fake mon amie,il n’y a pas et il ne aura jamais de l’énergie gratuites
Il doit avoir un pompe électrique quelque part et i chercher à effacer les trace avec le taux de tuyaux
C est une pompe bélier.
@@Diabolos-RIPTechnoblade- это не свободная энергия. чтоб поднять 1 литр воды наверх, расходуется 7 литров воды на землю
BEST DESIGN YET... 👍👍THANK YOU...
2:42 You must wear high heels and hand gloves. This cement is dangerous for your health. My brother, thank you for your effort. I wish you good luck and success in your life.
The glue when dry is totally inert.
máy.bơm này được nắp đặt cho một vùng cao của Việt nam thì tốt quá …cảm ơn bạn đã cung cấp T tin này .
Ini ide yg yg sangat menarik dan video anda juga sgt jelas
Nice triple ball RAM pump. That's a lot of pleasure clearly the way it blew out the seals. Lots of air pleasure in that upper tube, I've not seen one with the tube horizontal yet.
I would like to see a more detailed video on what parts were used to build this ram pump.
check valves and and an expansion chamber. you can raise 7' water column for every foot of input (fall) from the source, Filling my IBC totes for the garden from my pond
Ótimo trabalho 😅
Ide yang canggih super mantap bang
Um abraço a esse gênio. O chefe da nação de cada país é pra valorizar esses talentos.
Nice ram pump excellent work
Now you can plant at the top of hill an let gravity do the rest👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
Of course guys
Parabéns pela sua criatividade. 👍
inspiratif, apalagi kalau bisa mengurangi air terbuang dan apa tidak berpengaruh terhadap alat atau saluran bila diujungnya di split (seperti di menit ke-21)....
شماها چه نیازی به تشکیلات ایجاد استخر و لوله کشی و نسب دارید،،،،،خداوند هر هفته و هر روز بر سرتان باران میبارد،،،،!!!!این ابزار آلات به کار من میاد که سالانه یکساعت بارندگی نداریم،،،،،❤❤
в целом зачёт , только резьбовая шпилька сотрёт пластик через неделю и насос перестанет работать. Потребует замену, элементарно, ты это предусмотрел , но кто менять будет когда ты уедешь😅
Обратные клапана заводские надо было купить.😁 и вообще всё можно было сделать проще и надёжнее.😂
то, что мертво - умереть не может!
Как сломается то, что никогда не работало?
Как эта шляпа работает? Такое ощущение что закон сохранения энергии нарушен.
@@antonb.3398 гидроудар. вода под небольшим наклоном течёт в насос, набирает инерцию , и в этот момент клапан закрывается. Воде некуда деться, и вся накопленная кинетическая энергия переходит в потенциальную . Вода под давление идёт в верх. КПД не большой, основное количество воды теряется на разгоне, давление тоже сильно не поднимешь. Зато один из больших плюсов не нужен внешний источник энергии, насос компактный, надёжный.
@@MrMuha777 но не рабочий
Muito bem elaborado. Seria uma ótima solução na minha propriedade, não sei se temos no nosso mercado todo esses modelo de conexões utilizado no projeto.
Tem sim amigo, em lojas de materiais se encontra todas as conexões de todos os tamanhos e tipos
você compra montado chama "bomba de carneiro hidráulico."
keren banget ilmunya bisa mengalirkan air ke tempat yg lebih tinggi
Bruh.....clean them pipes before drinking out of that.....then again....plants dont really care, and one should boil water from the environment anyways before consuming. But still, dont want any of that to flake off and foul the valve seals.
Initial apprehension out of the way, very fine use of the ram pump concept! Looks like goodly amount of feeder head to push with too, I can see how it would build up a decent pressure/flow rate on its own. I agree with other commenters, more robust materials would ensure a longer life span, but the design is simple enough that individual parts can be replaced as needed. However, that PVC is going to rot in the sun, it doesnt like UV. Try burying it some. Not much, just enough to keep the UV off it and any problematic compounds in the air from degrading it. PVC in the ground lasts decades without issue. Also, if you can get some, try ABS (the black pipes). They're spun fibers so they hold up to pressure much better, ABS doesnt degrade in the environment like PVC (although, while it will last much longer, it still isnt happy being in the sun all the time), and in the unlikely (well, with your monster pump, potential...lol) event of an explosion ABS turns to ribbons, instead of shrapnel shards like PVC. Its still dangerous, as any pressure release can be, but you wont get spikes of plastic flying at your neck. Keep that valve design PVC though (or similar easy to work material), Ive never tried, but I imagine ABS wouldnt take kindly to being worked down like that. Oh, and the hardware on those outlet valves, where air can get to them, there is a potential for rusting. If you cant fully submerge that bit, try hitting the all-thread and spring with paint or a thin coating of soft setting glue mainly where then metal has been cut as that is where the stainless coating isnt protecting the steel.
Still, in a world of something being better than nothing, that design is a very functional solution!
Also, this video underlines the person who sees another person who doesnt look like them squatting in the jungle and assumes that primitive must know nothing worth while, is the one who truly knows nothing of the world in which we all live. Everyone we meet will know something we dont. Never pre-judge, be cruel, nor cowardly. Offer to assist in bettering someone's day when you can, where you can, if you can, how you can, while you can. The only way we will make it through all this alive is together 😎👍
Thank you for your suggestions and participation, friends
👍👍👍. Прекрасная модель для самотечного насоса на один сезон полива! Плюсы в том что дёшево и сердито😂😂😂. Когда в ДГМСИ учился на таком стенде нам гидроудара в трубах демонстрировали. Но может лучше было сделать на резьбовом или фланцевом соединении для удобства обслуживания?
Ну и так, чтобы клеевые соединения не текли, надо предварительно наждачной бумагой проходиться )
Как работает гидроударом, понятно. Но бассейн с водой выше того места, куда выливается вода со шланга. Не проще было просто водопровод туда провезти с бассейна?
Че за гидроудара?
@@user-cy2qc6km8v 17:33 там перепад высот между запрудой и концом шланга метров 5 не меньше, и запруда НИЖЕ конца шланга
@@user-mx6hu9yv6l 10,3 метра, согласно манометру и давлению водяного столба
Great video! You are in incredible inspiration in your passion to helping your family and community in a sustainable way with dogged determination.
بارك الله فيك وفي عملك
The ram jet pump is a great idea. However, my only complaint is the exhaust / waste water that is discharged. If there is some way of capturing that water, I can see a great future for solving some of the world's problems!
You can capture and use it at that level or below but the waste water is used to power the pump so it can't be pumped up, there will always be some wasted to perform the work but it can still be used for things below the waste valve. If you have a plentiful water source the waste is not important, nature takes care of it.
The "world" doesn't have a water problem. Governments and individuals do. It's called greed, lies, extortion, and resource hording.
Chỉ còn cách làm bánh xe nước
Very good project. Can help many peoples with water problems,especially to get the waters pumped up to higher levels. And no electricity used. Impressive! Great bro! Hope to see 👀 soon more people ,applying this system.👍🏿❤️
Very impressive 👏 Well done 👍✅ Good job ❤
very practical, and helps areas far from water sources, but at a minimal cost
It's genius, it would be great for places far from power sources
Das nennt man "Hydraulischer Widder" Diese Pumpe wurde 1796 vom Franzosen Joseph Michel Montgolfier entwickelt. Ist doch super das so alte Erfindungen noch heute Vielerorts sich täglich bewähren. 👍
Nice project sir I'm very interested good job bro😊
Oke salam
Kenal dari palembang 🙏🏾🙏🏾
pěkný ,,trkač " dobrá práce, volil bych svařované spoje, ale dobrý.👍
Nice project..👍👍👍
Kreatif..inovatif..bisa dibagikan ilmunya kang
Great job, this guy is very hard working , he's bricklayer, plamper and inventor in one, well done bro.
Está bem feito, mas ele não inventou nada. Existe á séculos
Good job n idea, saya ingin punya yg begituan
Ничего не понятно, но очень интересно )))
It is Ram pump and I am not sure the design makes it more powerful than simpler examples. The addition of the pressure bladder tank is a good Idea though. Of course it will only pump while the water in his pond stays above the intake pipe. I I did not see any pond spill over so is the inflow more than the outflow from the Ram pump?
Wah hebat ni sangat bermanfaat 👍👍👍