Finally got some tires for the 1100+HP C6 z06. Lets get them mounted up and see how they do! More goodies to come for the Z06 this summer so stay tuned.
The internet world doesn't like real people! That's why he doesn't have alot of subscribers. If he was fake and a scamer and saying he's having a car give away, buy a ticket for $100 then they would subscribe. This is a good channel he's got
Lol, that first rip🤣🤣 it’s like the first time your fast car actually hooks, you can feel your soul getting pulled from your body to sit in the rear seats🤣🤣🤣 ( yes ppl I know there isn’t rear seats, it’s an expression 🤦🏼♂️ for anyone about to comment dumb shit ) car looks and sounds killer 🤜🏻🤛🏻🤘🏻🤘🏻 this is my favorite c6 hands down
bro that speeda clip is INSANE it looked like you had the car on jacks in the air and did the pull. I can't fathom what that acceleration feels like! You gotta be pulling close if not more than 1g of force
Anyone notice how his subscriber list has jumped? It seemed to be stuck at 1.9k for the longest time and now it's at 3.24k. I guess he's on the fast track now. No pun intended. 😉 I couldn't believe you mounted the tires by hand! FWIW, I think the bead locks really make the look if you will. 👍👍 could the bead locks be mounted on the front as well, just for the look? Save the Wave. 🙋♂
Hell yeah awesome video. I know how feeling with all that traction, after 3 years with no traction I just put drag radials and S71 beadlocks on mine and I'm dead hooking now. I didn't even think it was possible!
Started watching your channel when you got the V1 and mannnn gotta say love the content and your car collection. Definitely love the E55 AMG will be looking to see if you have videos of that. Keep up the good work
Bro I subscribed because of the f250 but I'm really loving the vette and it's twin turbocharged woooo bro you sir have got a very clean collection 👌 👏 👍 🙌
When l use to write articles for Nissan Sport Magazine l had to answer questions from readers. Some had experienced loss of power after putting on aftermarket wheels and tires. After consulting with Nissan engineers l found out if you varied the outside diameter of the front and rear tires relative to the stock ratios more than 3% the ECU started thinking there was wheel spin and cut full power to the engine. I never changed the diameter of tires on my C6 but recommend you consult with Chevy engineers if you can regarding this. I wouldn't trust people on forums unless they have direct access to the engineers that designed the C6. You know how it is, everyone thinks they are an expert on-line 🙄. Good luck. Your C6 is the same color combo as mine was.
nice Job Chris. Surprised you mounted those rear tires.....good for you! put some heat in them, they will bite hard! thats one bad corvette....Killer! Ive got a 10 sec 85 mustang ......its crazy fast....your vette should be in the low 9s or 8 sec. Be careful. i got a c5 to cruise....I drove a c6 zo6 at cecil county...thats a great solid car.
To be honest in the past I’ve never really liked vettes. However I do own a 67 SS 327 Camaro black w/white belts so I’m not a Chevy hater I was actually brought up that way. I must say your build and the way you go about building your car has got me interested. If I were to one up the. Model you have is first followed close by the zr1. Awesome build keep up the good work videos included. Garage full of black beasts.
Check out streetspeed717, his zr1 us just insane. I've come to think vettes are peak vehicle for the price. Can't beat the sound, the speed, the reliability, and the looks for that price, and in a manual it easily competes with the crazy 10 speeds.
you have to drive the newer ( c-5 and c-6 LOL) to see how nice they are. I have been a fox mustang guy forever...and I still have a 10 sec street piece, ..i bought a c5.....BRAKES! HANDLING! i realllly like the c5. good time to buy...deals out there...
Sick. I have an 850whp mustang 6spd, got MT ET R bid ply in rear and radial front runners. It’s still not hooking well. Going to try the radials now and see if that fixes it. I feel you on spinning all day lol.
Love the set up brother…nice job!!! Quick question…what size were the rear tires before the Mickeys (street tires)? I’m planning on putting 345/25/20’s on 20x12.5’s and hoping they fit. Thanks!!!!
Should have had 2 more inches of off set to the front to get same size lip as the black wheels look better imo.. because of the weld not being wide enough..💯💪
This guy should have more subscribers with his videos being so 🔥
The internet world doesn't like real people! That's why he doesn't have alot of subscribers. If he was fake and a scamer and saying he's having a car give away, buy a ticket for $100 then they would subscribe. This is a good channel he's got
@@jeffkendel1570 this guy seems to know his shit.💪💪
@@cooterbrown7681 truth, as fucked up as it sounds it's the truth
People need to 👍. He has so many views but a fraction of likes and comments. That’s how CZcams gives exposure.
its the music 😆
The reaction from that first pull was perfect lmao
Nice 😊
The reaction to that first 2/3 pull was classic. What a ripper
Lol, that first rip🤣🤣 it’s like the first time your fast car actually hooks, you can feel your soul getting pulled from your body to sit in the rear seats🤣🤣🤣 ( yes ppl I know there isn’t rear seats, it’s an expression 🤦🏼♂️ for anyone about to comment dumb shit ) car looks and sounds killer 🤜🏻🤛🏻🤘🏻🤘🏻 this is my favorite c6 hands down
The reaction was CLASSIC! It’s a great feeling to enjoy your hard work.. I’m hooked bro…
The 2nd gear pull and then the smile says it all. Nice work.
bro that speeda clip is INSANE it looked like you had the car on jacks in the air and did the pull. I can't fathom what that acceleration feels like! You gotta be pulling close if not more than 1g of force
Anyone notice how his subscriber list has jumped? It seemed to be stuck at 1.9k for the longest time and now it's at 3.24k. I guess he's on the fast track now. No pun intended. 😉 I couldn't believe you mounted the tires by hand! FWIW, I think the bead locks really make the look if you will. 👍👍 could the bead locks be mounted on the front as well, just for the look? Save the Wave. 🙋♂
9.91k
Chris your channel is super underrated, good footage, info and cars. Keep em coming bud looking forward to more c6z content 🤙
Money! That's exciting man. I'm happy for you and glad it worked well with the new setup
Hell yeah awesome video. I know how feeling with all that traction, after 3 years with no traction I just put drag radials and S71 beadlocks on mine and I'm dead hooking now. I didn't even think it was possible!
Great videos brother and top quality I might add. Bad ass Vette and keep up the great work. Thank you
The smile tells everything, insane build 💪
love this channel!! His reaction priceless.
Your attention to detail is incredible! Great video as usual. I would love to have you do some work on my car.
I'm only jealous a lot!
A most excellent trick with the TPMS
Insane build man. Keep it up 💯
Started watching your channel when you got the V1 and mannnn gotta say love the content and your car collection. Definitely love the E55 AMG will be looking to see if you have videos of that. Keep up the good work
Dang that is a bad azz Z06 no doubt!! Awesome cars and video
I could almost feel the rush on that pull..👍
Gotta love the peeled up 3lz dash. That was the first thing I replaced on mine.
Just discovered this channel and I love it bro KEEP POSTING🔥
Same he’s good 🔥
Beautiful C6-Z my man !!!
Bad ass car Chris!🤘
Enjoy watching your builds. The tpms bomb didn't work for my C6z06 after a fee miles of driving.
Looks amazing!!
Legit great Videos Keep up the Great Work👏🏼👍
F'n beast! 🔥🔥🔥Looks badass and sounds amazing! Btw, good music too. 👊🏿
Never seen a better looking c6 🥵🔥🔥
Love your videos keep it up
Damn those Welds are 🔥🔥🔥
Man she sounds sweet! Sound like an airplane shutting down at the ramp💯👍🏿
That was my EXACT same reaction when I put them on my built Redeye lol. That was great bro!
Wicked car collection!!!
Not a fan of the wheels that you had on before with the rivets but the drag pack is beautiful! That's my dream car!
Makes my C6 look pretty bad there Sir! Thanks for hurting my feelings, Again! 🤣 That's one bad azz C6 man!!! Keep up the good work....seriously.
I love how you’re all calm and cool the first 3/4 of the video. Then you do that first pull with traction 😂
WOoOOOOoOooO!!!! 😆
All around dope!!!
Having good tires always makes you faster
Beautiful z06.
Bro I subscribed because of the f250 but I'm really loving the vette and it's twin turbocharged woooo bro you sir have got a very clean collection 👌 👏 👍 🙌
Keep up the content man I also have 2 vettes. Learning from the veteran
I got the same setup for the rear of my C5Z 305/45R/17 MT street R’s ! 😎🤙🏼
Looks great 👍 I would have done that same set up
RYE NH! I'm in Milton! Nice ride!
When l use to write articles for Nissan Sport Magazine l had to answer questions from readers. Some had experienced loss of power after putting on aftermarket wheels and tires. After consulting with Nissan engineers l found out if you varied the outside diameter of the front and rear tires relative to the stock ratios more than 3% the ECU started thinking there was wheel spin and cut full power to the engine.
I never changed the diameter of tires on my C6 but recommend you consult with Chevy engineers if you can regarding this. I wouldn't trust people on forums unless they have direct access to the engineers that designed the C6. You know how it is, everyone thinks they are an expert on-line 🙄.
Good luck. Your C6 is the same color combo as mine was.
Underrated CZcamsr. Keep it up
Thanks man!
I had to subscribe because his reactions are real reactions unlike some CZcamsrs trying to gas things up lol
Nice choice of wheels 👌🏻 you know I’d rather see some road race slicks on there so maybe you need a third set!
Nice car 🔥
Clean ass car bro
nice Job Chris.
Surprised you mounted those rear tires.....good for you!
put some heat in them, they will bite hard!
thats one bad corvette....Killer!
Ive got a 10 sec 85 mustang ......its crazy fast....your vette should be in the low 9s or 8 sec. Be careful.
i got a c5 to cruise....I drove a c6 zo6 at cecil county...thats a great solid car.
Dude whole video was worth watching when i saw 19:27 😂😂🤙🏼🤙🏼
Amazing car. 🇬🇧
Liking that shirt GSXR all the way an LS
Im actually digging the channel. I also have a pretty sick collection very similar to yours including 1st gen camaro and c6z lol
BRUH... this car is what wet dreams are made of lol... u have a beast of a car!!!
I hope to find that amount of traction on my ‘19 Z06 one day and have the same reaction
To be honest in the past I’ve never really liked vettes. However I do own a 67 SS 327 Camaro black w/white belts so I’m not a Chevy hater I was actually brought up that way. I must say your build and the way you go about building your car has got me interested. If I were to one up the. Model you have is first followed close by the zr1. Awesome build keep up the good work videos included. Garage full of black beasts.
Check out streetspeed717, his zr1 us just insane. I've come to think vettes are peak vehicle for the price. Can't beat the sound, the speed, the reliability, and the looks for that price, and in a manual it easily competes with the crazy 10 speeds.
you have to drive the newer ( c-5 and c-6 LOL) to see how nice they are.
I have been a fox mustang guy forever...and I still have a 10 sec street piece, ..i bought a c5.....BRAKES! HANDLING! i realllly like the c5.
good time to buy...deals out there...
Fire asf
Sick. I have an 850whp mustang 6spd, got MT ET R bid ply in rear and radial front runners. It’s still not hooking well. Going to try the radials now and see if that fixes it. I feel you on spinning all day lol.
Get Viking shocks if you don’t already got em
Damn than Vette is super sick , I would love to get a run with my GTR
The e63 🔥
Love the set up brother…nice job!!! Quick question…what size were the rear tires before the Mickeys (street tires)? I’m planning on putting 345/25/20’s on 20x12.5’s and hoping they fit. Thanks!!!!
The blue calipers look sweet on the black. Did they come like that stock?
Should have had 2 more inches of off set to the front to get same size lip as the black wheels look better imo.. because of the weld not being wide enough..💯💪
What kind of springs are you on my gawd😍😍😍😍😍
What is the offset and backspace for the 18x5 fronts ? also will this setup fit with stock big brake setup on z06 or grandsport ?
lol that first pull
badass car, is there a specific name blue color on the brakes ?
What year is your vette, trying to decide on ZO6 or Zr1.... your car is FIRE
it looks scary af XD
Clean vette what do u think of the 355 rear tires khumo makes ?? Lmk I need new new tires for my ZO6 not making as much as yours but around 960rwhp
how do you solve the traction control problem>? Does front and rear have same diameter?
Damn, did you win the lottery??
Nice ride. The new zo6 has 345’s in back why didn’t you get at least 315’s
I want to twin turbo a C7Z but I don’t see shops doing it unless it’s a drag car
sick
what rims were those before you put on the new welds?
Dude you have to race streetspeed717’s c7. That would be insane
You might want to raise the back a little if you get another person in there you'll rip your fender liners right out, happened to me on both sides.
What size tires are you running in the front ?
Dilf!🔥🔥
This guy is so handsome omg
What tire pressure are you running the ET street r tires on the street
How much faster now with the wheels? 60 to 130
Is that “u coat it” epoxy on the garage floor?
U hit 80mph in 2nd gear?!?!? Car looks and sounds amazing
These cars do 60 mph in first and 90 in 2nd lol
@@alexn.7527 Thats impressive. Beautiful car
What’s the full size spec on all these tires front and rear
I want that car man I love that vette you put together man you lucky 🍀you rock Chris (no)" homo"
hi what model is the one you show at exactly 5:45 with the screws( so tihey seem) all around the rim again at 5:51. Thanks
A daily in Arctic White ls3 C6 your car is absolutely f****** gorgeous !!?
Great videos Chris! What level tint did you use on your windshield?
35%
@@ChrisSullivan69 I’ll have to try that, 50 was too light in the past, was afraid 35 would be too dark. Is yours on stock suspension?
I miss my vette damn
I got forgestar almost look same with MT SS
Are you on stock suspension? I just ordered my ZR1 splitter and same spec drag pack this week lol. Hoping I don’t have to go to coils.
Yes stock suspension
what impact gun do you use?
what are the specs for the Front Runners?
How well does the ls2 and ls3 platforms handle twin turbo boost?
Not too bad. LS3 can typically handle a decent amount of boost depending on how its driven