8 MUST-PRINT UPGRADES for Your Bambu Lab A1 Mini 3D Printer!
Vložit
- čas přidán 15. 07. 2024
- The fact that I could print all of these things without a single issue should really be a testament to how easy this printer really is to use.
--------Models/Original Creators-------
Filament clip:
makerworld.com/models/495670
Cable clips:
makerworld.com/models/41020
Deflector:
makerworld.com/models/154673
Bin:
makerworld.com/models/156091
Storage box:
makerworld.com/models/492119
Handle/Filament roll relocation:
makerworld.com/models/440329
Guide relocation:
makerworld.com/models/440329
Blink Camera mount:
makerworld.com/models/122363
Heatbed cable chain:
makerworld.com/models/493268
------------Chapters-----------
Intro: 0:00
1.Filament clip 0:46
2.Cable clip 2:00
3.deflector/bin 2:41
4.Storage 3:42
5.Handle/spool relocation 4:33
6.guide relocation 6:35
7.Camera mount 7:29
8.Heatbed cable chain 8:46
Outro: 10:18 - Jak na to + styl
Okayyy im gonna grab that all 8 thing real fast❤
Hey Jet, thank you very much for your great video! 😊 I still wait for my A1 mini and I look forward to printing all the upgrades from you.Thank you very much. I Will keep you watching 😊
Thank you! I’m absolutely loving this printer, it makes me feel like i know what i’m doing 😂 I’m sure you’re going to enjoy it when you get it
did you get it yet?
Thank you for these great recommendations! I like all of them and will print everything but the poop deflector and bin because I found a deflector with a small integrated bin that will probably be enough for me.
Awesome video! I just ordered my a1 mini and can’t wait to make these!
Thank you! You’re going to love this printer
You won't regret it
Fantastic video, thanks for sharing.
Thanks for watching!
Your video basically matches my current upgrades my A1 mini has, lol all 8 of them that you have except for the handle.
that handle looks awesome, thanks for sharing! gonna print that now haha
for sure, thanks for watching!
To be honest, I would not use the chain for the bed cable. The cable possibly isn't designed for that and bends at the places it does. Same for the P1P to P1S conversion, where you need a different cable when using the cable chain.
This is a very good point!
Excellent video Jet
Thanks for checking it out!
Still waiting for my mini to arrive but I think I’m going to print all of these (except for the cable thing). Good video.
thank you! You’re going to love it when it arrives
Great!!! Thanks 👏👏👏👏
no thank you!
4:44 I think technically it takes up 4" in the back.
There's already suppose to be some clearance in the back for the hot bed to move. Minus that distance from how far the roll extrudes, it's only 4".
I'd be interested to see a follow up video about possible issues, bed adhesion and any quirks that you've noticed 😊
coming soon 👀
Lol ohhhh that's what that clip is for.. I think my bambu came with the printer and I put the filiament tube and the black tube together.
Nice.
Thanks for watching :)
Good prints. The only one that gives me pause is putting 2.2lbs of filament at the very top of the Z tower.. At these speeds, I can see that introducing some vibration or wobble.
Possibly.
I'm also a Wyze cam fan over Blink. Might have to look for a mount for those or remix this one.
But definitely going to print at least half of these!
That’s a great point, i’ve printed at least 10 prints since moving the spool and no issues so far but none of them have been very tall, i’ll definitely update if i start having issues!
I've been using a similar mount for filament (though mine puts the roll on top of the Z axis and not behind it; "A1 Mini Top Spool Holder and Handle w/ cable guide" on makerworld) on my A1 mini since I got it back in february and there's no issues with vibration or wobble. I worried about that too, but it turned out to not be an issue at all.
if i start to have any issues i’ll have to check this one out
Great video. How high is the top of the reel to desk after repositioning of the handle.
it’s about 18.5” off the table
what material did you print with?
Thanks for the info and the links. Noticed the link to the Guild relocation part is the same as the link to the handle. Could you update that? Thanks!
Hey, it’s the second plate under that design. there doesn’t seem to be a separate link because it’s under the same object. Let me know if that makes sense
The spool on top is awesome!!! But couldn't it affect negatively some part of the printer? Like the vibration algorithm or something?
Hypothetically, yes it could. however I printed many prints with full spools located at the top before I got the ams system and noticed no changes in print quality or vibrations :)
Anyone else freak out at 5:50 when he grabbed the unattached handle to pick up the printer, not realizing he had cut to after the screws had been installed?
editing magic 😂
Gave you the 1000th subscribe 🎉So I am your 1000th subscriber 😊🎉
No way thank you so much!
@@jet_lea np,will definitely see your new video for the Bambu lab a1 mini because i have ordered mine
Why would you print that bin e
to catch the waste but any container will work just fine
Hi Jet
I have spent 10 min trying to find the files you have displayed for us in your video.
I very much would like the spool relocating and bowden relocating STL files.
I see your makerworld links, sadly makerworld is not a repository of model files like thingyverse or printables. there is no way to download a file from the site, and so I ask for you to make these files available, as STL or OBJ. no one wants a 3mf virus on their laptop, no one rawdogs someone else's Gcode on their printer.
make it accessible, or its not relevant.
THANKS
these aren’t my creations however let me see what i can do
@@jet_lea Thanks Jet, I found a crummy version without the screw retention, used a 3m strip, good enough. wierd file tho to be sure. several people have videos of various storage devices, have the long tray prominently displayed, yet no reference to its existence
That drag chain has to much "backwards" play & looks too long. Will just end up creasing the cable more.
specifically try to avoid bends like the one between link 1-2.
That’s a really good point, i’ll have to check it out :)
@@jet_lea Since you answered i reread my original message. To reiterate a bit more thoughtfully.
If looking from the side. The chain should not go past the end connectors. The outer stops are there to force the U rolling motion.
With a worn or a chain will play it. During "extension" will cause the chain at the stationary end pieces to hinge. When retracting, with the cables mass above the moving end connector. The chain wants to rise instead. Putting a lot of load on the moving end connector and snap it over time.
Well i mostly work with industrial machines the weights probably makes a lot of difference. I will stop to ramble now think im damaged from work. :D
Watched at 1.25x speed because you talk so slow!!!
that’s what the setting is there for!
P*** I watched at 2x speed cuz he talks so slow.
@jet_lea jk ur great thanks for the links