How To Replace Passenger Side Valve Cover 2007-2017 Ford Expedition
Vložit
- čas přidán 27. 08. 2024
- Buy Now!
New Valve Cover from 1AAuto.com 1aau.to/ia/DMEV...
Under the valve cover, you have camshafts and the valvetrain spinning and flinging oil everywhere. When you do see oil around your valve cover, you know it’s time to replace the gasket or the cover itself. This video shows you how to install a new valve cover in your 2007-2017 Ford Expedition.
• Check here for more videos on the 2007-17 Ford Expedition: • Ford Expedition 3rd Ge...
This process should be similar on the following vehicles:
2007 Ford Expedition
2008 Ford Expedition
2009 Ford Expedition
2010 Ford Expedition
2011 Ford Expedition
2012 Ford Expedition
2013 Ford Expedition
2014 Ford Expedition
2015 Ford Expedition
2016 Ford Expedition
2017 Ford Expedition
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXA...
• Pocket Screwdriver
• 10mm Socket 1aau.to/oa/1AXA...
• 8mm Socket 1aau.to/oa/1AXA...
• Air Blow Gun
• Trim Tool Set 1aau.to/oa/1AXX...
• Ratchet 1aau.to/oa/1AXA...
• Socket Driver
• Socket Extensions 1aau.to/oa/1AXA...
• Swivel
• Torque Wrench 1aau.to/oa/1AXA...
• Dielectric Grease
• Engine Oil
• Paper Towels 1aau.to/oa/1AXS...
• RTV
• Pick 1aau.to/oa/1AXA...
• Razor Blade / Gasket Scraper 1aau.to/oa/1AXA...
• Rubber Mallet 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Ford Expedition 3rd Generation 2007-17: • Ford Expedition 3rd Ge...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Just wiggle this around to get it out he says. What a pain to remove
By far the best valve cover change video full of helpful tips, with very well done narration.
Tip: remove the VCT solenoid once the cover is loose and before you try to wiggle it out. Reinstall the VCT only once you got the cover back into place roughly. The VCT sticks up high.
So you skip taking the VCT valve out how are we supposed to know about that if you don't show it to us? You are the teacher, you are leaving out important steps that we need to know, we wouldn't be here if it was easy
I'm getting ready to do change the timing setup on my 5.4 3v. No issues, YET. 194k, I just figure it's time to get ahead of any issues. But its very intimidating !
+Jerry Cordova Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-TRQ
I really enjoyed this video as im going to sub. Will be another go to if he has anymore 5.4 3v vids.
Fordtechmakuloco has a 4Video Series on Timing Chain. I watched it the other night for the fun of it.
The depth on his videos is awesome.
I see TRQ going up in subs with this video. I Yet to watch any others.
The heater hoses are blocking the way, how did you pull the valve cover out? The video clip for this critical step was edited out. How did you put the new valve cover in? This is the most difficult step, and the video clip was also edited out.
It was difficult. Tip: remove the vct solenoid once cover is loose and before attempting to wiggle it out. Reinstall it only once the cover is roughly back in place.
completely skip the hardest part: removing the cover and putting it back in. Not super helpful.
Thanks I broke my vapor line and didn't know what it was inorder to get a new one. I had to replace the
VVT valves and was trying to remove it.
THAT GASKET slips out :(
Is the RTV cured enough to crank immediately or should you wait the full 24hr cure time?
Change the oil before running engine? How will any debRis in the head get to the oil pan?
This is video is not a true tutorial. He skipped the most important part which is the "PROCESS" of removing and replacing the valve cover and removing the VCT oil control solenoid located inside the cover. This is not a simple 11 minute job. If doing it yourself you'll easy spend 3+ hours with the proper tools and 5+ without proper tools. I don't wish this install on anyone
BEWARE. This video leaves out critical parts of removal and replacement of the cover!! Read through the comments before attempting. Now that I am into this job, I'm a frustrated with how much info that was left out. I'm not sure I'll be able to get the cover back in, especially trying to keep the gasket in place. Very difficult!
+@mrpeterpumpkin48 Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ
List of tools needed? Thanks.
What size socket you need to remove the valve cover
Whyd you skip the weaseling? That's literally the part everyone struggles with
That's what I wanted to see also. Having a hard time getting the cover back in
At 2 minutes and 28 seconds what did you unclip. Thank you
It was a little grey clip
Probably a knock sensor
Way worse - be honest. Jesus
I know right truth is in a weeks time several takes and hours of editing here you have it a few loving bonks its out easy peezy uh huh suuuure buddy
DO YOURSELF A FAVOR and remove the passenger front tire before you do this. You can get to all the bottom bolts easy that way. Especially that one on the fire wall bottom. Your welcome..
+Ken Rivers Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ