Huge Profit Cedar Planter | FREE PLANS
Vložit
- čas přidán 8. 03. 2023
- A simple, but stylish Cedar Planter that's inexpensive and easy to build. Using 3 cedar fence pickets and one cedar-tone 2x6. It's great for building and selling. Also, it fits a planter tray!
*PLEASE SUBSCRIBE*
Disclosure: Links contain affiliates.
As an Amazon Associate I earn from qualifying purchases. When you buy through one of my links I will receive a commission. This is at no cost to you.
Thank you for supporting Bear Mountain Builds and allowing us to continue to bring you valuable content.
*Products Used*
90 degrees positioning clamps:
amzn.to/3Tm5Ttd
Planter tray:
amzn.to/3ZzxCra
Rigid Brad Nailer:
amzn.to/3T3vnKf
Paint Spray Tent:
amzn.to/3KkTcLl
Rustoleum matte black spray paint:
amzn.to/3muXTIo
Glue Brush:
amzn.to/3YzxoyI
Glue Roller:
amzn.to/3YBrwVT
6'' Clamps:
amzn.to/3IARLqM
12" Clamps:
amzn.to/38oDWMZ
Bosche Miter Saw:
amzn.to/3i8gdVz
Delta Table Saw:
amzn.to/3WL7d7s
Titebond II wood glue:
amzn.to/3ymr5nN
*MY GO TO TOOLS*
100'' Straight Edge Saw guide:
amzn.to/3UhCOxz
DEWALT circular saw:
amzn.to/3MCtwsz
DEWALT impact driver & hammer drill:
amzn.to/49SAvbc
Bosche miter saw:
amzn.to/3i8gdVz
DEWALT bit set:
amzn.to/3g7ddHT
Gorilla glue:
amzn.to/34ULnJK
6'' Clamps:
amzn.to/3IARLqM
12" Clamps:
amzn.to/38oDWMZ
Delta Table Saw
amzn.to/3WL7d7s
*Filming Equipment*
Canon EOS M50 camera
amzn.to/3t39P46
Tripod(best tripod ever)
amzn.to/3WwAnbz
Hand held Tripod
amzn.to/3NB06LX
Universal camera mount
amzn.to/3WxKTzc
Lavalier Microphone
amzn.to/3l82Eqx
RODE wireless GO microphone
amzn.to/3DF8yW3
Directional Microphone
amzn.to/3UugnEM
Adjustable Lights
amzn.to/3Dzszx4
Set lights(mainly all that I use)
amzn.to/3WBjDQo
*FREE PLANS*
PLEASE SUBSCRIBE if you're using my plans!
www.bearmountainbuilds.com/pr...
*Bear Mountain Builds Things*
Instagram: / bearmountainbuilds
Facebook: / bear-mountai. .
Bear Mountain Builds (Free Plans): www.bearmountainbuilds.com/
Patreon: patreon.com/BearMountainBuilds - Jak na to + styl
Thank you for offering free downloadable plans. It is very generous of you and I, for one, greatly appreciate it!
Cool planter box. Thanks for the video and the plans.
Simple, easy and good looking. Thank you so much👍👍👍.
This is an awesome build and super simple! Love it!
Liked that planter design
Beautiful I know these will do well at craft shows, thanks for sharing !!
Pretty cool! Thanks for posting.
Thanks so much for what you do. I am a beginner and so appreciate the free plans! You will always have my support!!
Great job and project... keep up the awesome work!!!
Great job and build thx for the tips and sharing enjoyed it Be safe God Bless
Awesome build. Keep up the great work. Going to make this as a surprise for my wife. Thanks
Well made video. I like the two tone planer.
Thank you so much for the plans. Subscribed.
Excellent job I'm going to try this!!
Thank you for this 👍 very nice design
This build looks SO easy, and the finished product looks AMAZING!
I will be trying this one as soon as I can carve out some time!
Thanks for the plans!
Oh, I’ll be watching the rest of your videos for sure!!!!
Thanks for sharing ❤
Looking forward to building this. Thank you for a great video and plans.. just ordered wood to build my bench using your plans. :)
Thank you from France 🇫🇷 I made 4 off them 👍👍👍👍
Well done!
Thanks for this! My wife and kids keep getting flowers and seeds from various places. We end up having all these little small pots (like 4 and 8oz pots) everywhere. This will be a MUCH better way to organize these and they will look much nicer.
Just found your channel
Loving it
I downloaded the free plans
Thank you
Nice build!
You do a great job
Nice job 👏
Very nice. I’ve downloaded the plans to make some of these 😊 love your work
great work boss !
Great idea
thank you for plans. new sub appreciate all you do
Really glad to have found your channel on CZcams. I hope to use some of your ideas and plans to make a little extra cash this summer. I'll let you know. Also I'll be going through all your videos and hitting the like button. Although I haven't been able to watch them all yet, I hope it helps. Stay blessed young man.
Thank you
thats pretty neat like it alot gonna make a couple
Very nice! I can envision a few variations 😊
Nice job
I love your videos. Literally watched them all over the week. I been wanting to get into wood working for a long time now. When I start building your design for my family and friends will give you all the credit and send them to your channel. Much love.
I really appreciate it!
Lol. What a loser
Didn't know Mark summers was into woodworking lol. Great build
😂😂😂😂
Waiting on him to be slimed.
Yes! I couldn't place him...
Weird compliment, but thank you for listing the gauge and length of the brad nails used. Seems like a small thing but when I look over what sizes and how many I have it's nice to know at a glance if I need to go run and top-up on a certain length.
nice build..
Planter looks great! Would you consider making a video on how to properly use a hand router? I always have trouble getting it set up correctly.
Definitely interested in these plans!
The plans are now out!
@@BearMountainBuilds How did you fix the nail breakout at 2:22?
Thanks!
Thanks I really appreciate it!!
Nice planter! After downloading the plans & attempting to open them, I see your notations about the "Coming Soon." I'll probably just come up with dimensions. Thanx again so much!!
The plans are out now!
@@BearMountainBuilds Thanx SO much, Zach!
@@BearMountainBuildshave you seen this video? It’s the same planter box
czcams.com/video/6zxOpk2q8Tg/video.htmlsi=J-DbOc73YOCGqibC
Cool build! Subscribed and thanks for the free plans! I'll definitely have a look at them and try some out for practice! I really need a miter table for my miter saw so that'll probably be the first thing I make out of your plans! I don't have a brad nailer yet, but it's on my list of things to get
Cool bruh. Aka loser
Nice. simpler way than on DIY Creators Channel. But both look good.
Plastic drinking straws also work great for cleaning up glue squeeze out in corners. When the end of the straw gets full of glue, just snip if off with scissors.
Do those even exist anymore? Hahaha I kid I kid
You asked for locations - joinery tutor based in N. Ireland
Big thanks for cool craft ideas for the students 👌
Nice job! Simple, effective You can't be a real CZcams "creator," you're not 100lbs overweight. Stay tight and keep up the nice work (from an old woodworker and broken down jock).
Great work. Great planter. Lovable planter. Just to add a fact, the function of this planter is not meant for draining water from the top box. You would need a protective plastic to help catch and avoid spillage. You do not want dirty water dripping on that beautiful base. I like your neat build.
Man Thanks for this pattern... I made one... posted it for sale... Got such a response That I started taking orders and in 24 hours I had 30 orders... Pulled the Ad so I could catch up! At $50 each I may have posted to cheap. Thanks again.
That’s awesome!
$50!? That's way to low. I will make from Cedar (better for environment) and sell for $350... Or more!
@@RogerD-hx5sdthat's a stretch 😂
@@RogerD-hx5sd Doesn't sound realistic
Mesmo lindo
Big fan of your channel since discovering your workbench build. I feel like the laminated fence pickets for the bottom shelf are too noticable at the end grain though. Debating between adding bottom stretchers to cover those up or just using more cedar decking cut to 2x2 dimensions like you did for the legs. Guessing the latter would mean buying another board though.
Very nice video.
I love the free plans u provided with the videos. So many videos say free plans but when we go to download the ask for money.
Please upload some basic things which every one needs in routine life like tables drawers shelfs no one gives plans for this simple projects.
LOVE FROM INDIA ❤
The plans are $0
Great video....only thing is should use tight bond III for outdoor use.... designed for it
Titebond 2 is water resistant and would work well, but if you want to take it the next step yes 3 would be the best of the best
Try using a plastic drinking straw to clean up along the inside edges and corners and wipe the excess with a wet paper towel. Works pretty well.
This could easily be adapted to hold a grow light for starting seeds indoors and taken outside for hardening plants to plant outside after frost danger is past. Also would work great for an indoor herb garden for fresh herbs year round. I'm gonna need two or three of these.
Curious why you didn't use half laps on the legs since the bottom shelf is half lap joints.
I didn’t want the black supports to be seen on the ends
Hey love the channel/plans. Wondering what I'm missing on the plan where it says the vertical leg are "22 3/4" but page 5 end view shows the legs are 20" tall?
Awesome love it! I built a different style planter last year, I used spar urethane for outdoor furniture. My wife wants another one, I like this design except she wants the planter box portion painted turquoise... Not a problem but I think oil based spar urethane over the paint will dull/change the color, any suggestions for a protective coating over the paint? Also looking forward to seeing your new shop completed, lol I'm not a hater but definitely jealous 😂😂
If you use crystal clear water based poly it shouldn’t impact the color too much. I’m very much ready to get into the new shop but the Minnesota winter really slowed me down since I still have to finish putting in the insulation. I should be moving in this spring and finishing sealing it up this summer
Always enjoy your builds. What length roofing screws were used here? For a 5/4 board, do they sell 1-1/4 roofing screws? Or are these strictly decorative.
No screws or pocket holes at all? 😬
So the brads and glue hold up in the long haul?
Great video. Awesome channel.
Be well!
Your very good, think you can best the "Modern Nightstand, By Shades of Blue Interiors"? It's done with only a single plywood sheet, I'd love to see your more talented take on the design. Maybe in 1/4",,,the economy is tight, lol ;)
Really good looking design, sadly i would have to make it from pine as cedar is sooooooo costly in the uk
Pine would still look great!!
Awesome , thanks. I enjoyed the video , wondering how hard it would be to change the size ??
It could be scaled up relatively easily but may want to make the legs thicker so they don’t look too skinny
This looks easy as long as you have all the tools. That stuff is expensive.
You can build it with other tools that are cheaper but it will take a bit longer
this looks very similar to DIY Creators raised planter box.
Would the brad nails/glue combo hold up long term? or would it be better to add screws as well?
Screws will always be more durable. I just used Brad nails because it’s simple and fast. I think the Brad nails and glue will last for quite a few years
With cedar being soft and using cedar fencing, which is a thin piece of wood, you would run the risk of splitting the wood with screws. I would get thicker cedar planks (which is more expensive) if I was going to use screws.
For the bottom shelf wont the paint on the ends of the support beams cause the glue to not bond the shelf as well to the legs? Wouldn't sanding the paint off of those locations allow for a stronger glue bond and a stronger shelf? Other than that this is a great build i cant wait to get out in the shop and give it a try.
When I painted the supports for the bottom I tried to not get too much paint on the ends, but you’re right that if you want max strength it would be best to either mask the joints off or sand them before gluing. Either way it’s still plenty strong as is
@@BearMountainBuilds Thanks. I'm looking forward to getting into my shop and giving the build a try.
Excellent projects. How do we find the plans?
I have a link to my plans in the video description
Are there individual plastic pots used inside of the planter or is just filled with lose soil in the planter?
Loose soil
How do you get 8 pieces from the stacked cedar that are 8 1/8 long when the total length is only 23 7/8? I can only get 6 with the last two being 7” long?
What is Pressure treated Cedar tone wood? Is that something that can be bought at Home Depot or Lowes or is it just plain old pressure treated planks treated with cedar tone stain? I want to make some of these planters but I'm very confused about the "pressure treated cedar tone" wood.
It’s a board that is generally used for decking that can be bought at Home Depot or Lowe’s. I bought mine from Home Depot. It’s pressure treated so it can’t rot and the cedar tone means it’s artificially colored like cedar
subscribed liked an rang the bell in apreciation for video and plans tks
MUSIC GAVE ME A HEADACHE BUT THE BUILD WAS AWESOME
Does the glue stick to the paint?
Yeah it does. However if you want to make it as strong as possible you would want to mask the areas where it will be glued before painting. However, as is it is plenty strong enough
About how much would price this at. I know all depends on the market in my area.
At least $40 but it depends on what your time is worth
You should charge for the plans, they are really great. So I am going to pay you for them. You also have a typo on your shop page (bought not brought)! ;) great channel.
Thanks Kris I really appreciate it!!
So, won't the nails rust out? What about dowels.
I stuck with Brad nails because I wanted to keep the build really simple for beginners to woodworking. I decided that dowels might be a bit to advanced for a first project
Unless this is designed to be an indoor project, you need to be using Titebond 3 wood glue which is waterproof.
Based off the Titebond 2 spec it is water resistant and suitable for outdoor use
Where can i get the plans
?
They are linked in the video description
Nice work. Buts that’s not Titebond II sir.
It's an old Titebond 1 bottle filled with Titebond 2 glue. I ended up buying a new small bottle on Titebond 2 to avoid confusion in future videos
@@BearMountainBuilds oh ha ha. Fooled me for sure. Love the build 👍
For the negative Nellie's... KISS
I agree, I'm not a beginner but this project and others like it helps everyone. A beginner has a step by step guide, someone experienced can adjust to their taste accordingly. It's getting harder to find woodworking channels that actually build things that normal people can build without thousands of dollars worth of festool and sawstop products. I applaud this guy and appreciate his work
I wonder how much you can sell these for.
Depends on the area
@@BearMountainBuilds Myrtle Beach, SC.
I'm struggling to get the tools to start my own woodworking business. I feel like it always just out of my reach.
Just got to start somewhere and as you make more money you can buy more tools
How do I download the plans?
There’s a link to the plans in the video description
I downloaded the plans but they would not open please help thank you
Are you still having issues?
@@BearMountainBuilds nope thanks keep up the good video
Hi can we have the measurements ?
I have all the dimensions in my plans linked in the description
You should be using Titebond 3 which is waterproof.
Based off the Titebond 2 spec it is suitable for outdoor use and water resistant
@@BearMountainBuilds TB2 is water resistant, TB3 is water proof. Well worth the extra few dollars on something like this. Love the design BTW.
I hate it when I lack in appendages... 🤔
I guess I didnt get the dimensions????
All the dimensions are in the plans
Glue on painted surfaces and only brad nails. 12 months time it would have fallen apart.
lol ok.
should use titebond 3 and not 2. Also, you are using titebond original in the video.
It's an old Titebond 1 bottle filled with Titebond 2 glue. I ended up buying a new small bottle on Titebond 2 to avoid confusion in future videos
Glue is not waterproof
This glue is water resistant and Titebond 3 is water proof
@@BearMountainBuilds but u used Titebond original in the video witch is not waterproof
The glue you are using is not suitable for an exterior project. You should be using a waterproof glue like Titebond III
It is water resistant glue and based off the supplier spec okay for exterior use
@@BearMountainBuilds I am looking at my bottle of Titebond Original Wood Glue, which exactly matches the bottle you are holding in frame 1.23. The label specifically says " Not recommended for exterior use or where moisture is likely." Further, in even bigger font, the label says "For exterior projects, use Titebond II or Titebond III."
No one can afford cedar anymore , geez
They’re about $3.50 a plank at Home Depot near me
Didn't watch the whole Video, why, he says he is using Tite Bond II, when he is using the original, which has NO Business being in an outdoor project
It’s an old bottle of Titebond 1 I refill it using a big jug of Titebond 2
I am sorry, is he single bc he's smoking hot!!!!
Hey hey,
I appreciate you brotha!Thank you for the plans!! You don’t have a patreon (ok I don’t need to spell for this) I already subscribe, but how can we buy you a coffee or something? Like I said I appreciate the free plans and already subscribe.
I’d like you to keep doing your videos and free plans. So how can we donate a little cash so you will keep making such great content?
If everyone that downloaded the free plans donated $5,10,20 bucks, you’d have a little side capital to make even cooler videos and more free plans. I say free plans because not everyone has the extra cash to donate every time but at some point when they do have an extra few bucks they can pay it forward then! I know TMI! I can’t help it! Done… oh wait but… nope done.JK
Dang I was going to be done but I haven’t been to your website in a while so I checked… you’ve added a lot more freebies!!!
Hope you’ll setup a donation option! Makes me feel weird to keep taking the plans without donating something. I can’t be the only one that thinks you should. You’re not begging for money, you’d just be giving the option for people that want to send a little something something! Thank you for your consideration!
Done for real
E
E
Thanks man I really appreciate it. So far I don’t really have much set up. Maybe someday I’ll have a Patreon. Some people have somehow payed me with a super thanks through CZcams(I have no idea how they even do it). Maybe some day I’ll sell my plans for $0.99 just to pay for my website because it costs me an annual fee to even keep the store live, but not for awhile yet. But I really do appreciate you wanting to tip for the plans!
Iloveyou