Video není dostupné.
Omlouváme se.
Aruba AP500 Series Indoor Access Points Mounting Guide
Vložit
- čas přidán 19. 08. 2024
- Learn about the different mounting brackets for the Aruba 500 series access points | More at phoenixpro.clu...
Check out the mounting bracket installation guides here: phoenixpro.clu...
These brackets also work with the new AP-635.
Thank you for sharing this valuable and timesaving video! Maybe one day Aruba will have the funds available to produce such useable content.
Thank God for your Videos Marilyn, I had to figure out which brackets to order without having access to any, this vid was the exact one I needed!
Glad it was helpful!
Thank you for the t-rail bracket mounting instructions, very helpful!
Thanks for this! I am an Aruba SE in the US and I refer my customers to this often! Nicely done.
Awesome! Thank you!
Wow, this was so handy...these brackets are like some sortsa IQ test but now we know how to use them better....great stuff.
That's great to hear!
Very helpful, thanks for posting!
You're welcome!
Thank you for the video and breaking it down for us! Very helpful!
Glad it was helpful!
You already buy this thing for a lot of money, but you also need to buy this, it’s very convenient.
Nice guide! Thanks
Glad it helped!
what a gorgeous lady... think I'm in love😍
Que estaba pensando los ingenieros de hp cuando diseñaron el sistema de anclaje?, Esto se llama "la burocracia de la instalación"
Hi, thanks for doing Aruba’s job 😊
Would you know if the D mount work for the 635 AP?
I need to attach to solid ceilings
Yes it does. You can check out our AP-635 video here: czcams.com/video/RDBzrhdeNtI/video.html
Hey! Thanks
Welcome!
is there a part number for the bracket that's supposed to be pre-installed on the AP itself? The metal bit that slides into the various options of mounting rails?
Unfortunately not. It's not available as a SKU
@@ArubaPhoenixProClub Does it come standard then with the AP or with the type of mounting bracket?
@@ArubaPhoenixProClub well you guys should make one. These get left on rails all the time during de-installs and are impossible to mount properly without them. Someone made one on a 3D printer, you guys can make a SKU for it and manufacture spares
@@martinprinsloo5653 they come standard with NIB APs, and it's a crapshoot whether you'll get one on the third party market
thank you, great video!
do they also fit to 300 series APs?
Hi Andreas, no, these do not.
how much user can support for data sharing and for networking printing
Hi Abhishek, unfortunately the answer to your question is typical answer given by engineers and it's: "it depends". It depends on many factors. First question is: How much sustained throughput are you trying to deliver to each client simultaneously? 500Kbps/5Mbs/50Mbps? All of these are valid answers but can affect the number of how many users you can "support" per AP by a factor of 100. Other questions to consider: Are your clients 2.4GHz or 5GHz capable. Are you using 20MHz, 40MHz or 80MHz wide channels. Are your clients really close to your APs and can connect @ really high data rates or are they far away and are connecting at very low data rates? How congested is the spectrum where you are deploying this network? Are there 10 other APs and 100s of clients sharing the same channel. Remember WiFi runs half duplex and only one device can transmit at any given time on any given channel meaning you will have to wait for your turn if you have many neighbours. Have a look at this video by Ekahau: czcams.com/video/kwp2szhU_WI/video.html to get you started on Wireless Design.
@@ArubaPhoenixProClub i can make this bracket
你好,我可以把视频搬运到tiktok吗,
Hi
Shame they come in boxes of 5 only..
Each bracket's usually sold individually or packs of 10
We have been buying them in boxes of 10